S. Das

发表

Microstructure and wear of cast (Al-Si alloy)-graphite composites

S. Das, S. Prasad, T. Ramachandran, 1989 .

Metal-mediated alkynediol cycloisomerization: first and second generation formal total syntheses of didemniserinolipid B

C. Ramana, S. Das, Boddeti Induvadana, 2013 .

A formal total synthesis of (−)-kumausallene

C. Ramana, S. Das, S. Das, 2015 .

High stress abrasive wear behaviour of aluminium hard particle composites: Effect of experimental parameters, particle size and volume fraction

D. Mondal, Swapan K Das, D. P. Mondal, 2006 .

Aluminium alloy—rice husk ash particle composites

S. Das, T. K. Dan, S. Prasad, 1986 .

Factors controlling the abrasive wear response of a zinc-based alloy silicon carbide particle composite

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1997 .

Abrasive Wear Characteristics of Zn–37.2Al–2.5Cu–0.2Mg Alloy Dispersed with Silicon Carbide Particles

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1995 .

Combined effect of reinforcement and heat treatment on the two body abrasive wear of aluminum alloy and aluminum particle composites

S. Sawla, S. Das, S. Das, 2004 .

Abrasive wear of Al alloy–Al2O3 particle composite: a study on the combined effect of load and size of abrasive

A. H. Yegneswaran, A. K. Jha, D. Mondal, 1998 .

Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1998 .

Microstructures of cast Al-Si alloys in the presence of dispersed graphite particles

S. Prasad, P. Rohatgi, T. Ramachandran, 1991 .

Correlation of abrasive wear with microstructure and mechanical properties of pressure die-cast aluminum hard-particle composite

D. Mondal, G. Dixit, S. Das, 2001 .

Tribology of AlSi alloy-graphite composites: triboinduced graphite films and the role of silicon morphology

S. Prasad, T. Ramachandran, S. Das, 1991 .

Sliding wear response of a zinc-aluminum alloy as affected by SIC particle dispersion and test conditions

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1999 .

Tribological behaviour of aluminium alloy composites : a comparative study with a copper-based alloy

Swapan Das, B. Prasad, S. Das, 1993 .

Solidification of aluminium-silicon alloy in the presence of graphite particles

S. Das, T. K. Dan, P. Rohatgi, 1986 .

Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 °C: Damage micromechanisms

C. Srivastava, N. Paulose, D. Fernando, 2018, Materials Characterization.

Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron

R. K. Singh, P. Jena, J. Sahu, 2018, Wear.

Erosive-corrosive wear of aluminum alloy composites : Influence of slurry composition and speed

D. Mondal, S. Das, Y. Saraswathi, 2006 .

Wear response of a Zn-base alloy in the presence of SiC particle reinforcement: A comparative study with a copper-base alloy

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1999 .

Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 2003 .

Role of natural polymers in the development of multiparticulate systems for colon drug targeting

A. Jha, Rohitas Deshmukh, S. Das, 2010 .

Abrasive Wear Behaviour of an AISI 5132 Steel under Low Stresses

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1994 .

Synergic effect of reinforcement and heat treatment on the two body abrasive wear of an Al–Si alloy under varying loads and abrasive sizes

N. Ramakrishnan, D. Mondal, S. Sawla, 2008 .

Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion

S. Mannan, B. Kumar, N. Paulose, 2015 .

Characterization of rapidly solidified aluminium-silicon alloy

A. H. Yegneswaran, S. Das, P. Rohatgi, 1987 .

Study of erosive-corrosive wear characteristics of an aluminium alloy composite through factorial design of experiments

B. K. Prasad, S. Das, B. Prasad, 1998 .

Effects of Sand Concentration on Slurry Erosion of Steels

A. H. Yegneswaran, B. K. Prasad, S. Das, 1998 .

Mechanisms of material removal during erosion-corrosion of an Al-SiC particle composite

D. Mondal, R. Dasgupta, B. Prasad, 1999 .

Influence of experimental parameters on the erosive–corrosive wear of Al–SiC particle composite

O. P. Modi, D. Mondal, R. Dasgupta, 1999 .

Sliding Wear Response of an Al–Cu Alloy: the Influence of SiC Particle Reinforcement and Test Parameters

A. K. Jha, B. Prasad, S. Das, 1998 .

Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load

A. K. Jha, R. Dasgupta, B. Prasad, 1997 .

Comparative study of the performance of conventional and column flotation when treating coking coal fines

S. K. Biswal, P. Reddy, M. Jena, 2008 .

Investigation into recovery of iron values from red mud dumps

S. K. Biswal, J. K. Sadangi, S. Das, 2018 .

Effect of SiC addition and running-in-wear on the sliding wear behaviour of Al–Zn–Mg aluminium alloy

D. Mondal, Swapan Das, R. Rao, 2005 .

A Comparative Study of Corrosion Behavior of Al/SiCp Composite with Cast Iron

D. Mondal, S. Das, Y. Saraswathi, 2001 .

Mechanical behaviour of rapidly solidified aluminium-silicon ribbon-polyester composites

N. Chand, S. Das, P. Rohatgi, 1986 .