Benjamin Schleich

发表

DEEP LEARNING IN SHEET-BULK METAL FORMING PART DESIGN

Sandro Wartzack, Christopher Sauer, Benjamin Schleich, 2018 .

A Quantitative Comparison of Tolerance Analysis Approaches for Rigid Mechanical Assemblies

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2016 .

Linking a game-engine with CAD-software to create a flexible platform for researching extended reality interfaces for the industrial design process

Sandro Wartzack, Benjamin Schleich, Jakob Harlan, 2020 .

An approach for determining the influence of manufacturing process parameters on product quality characteristics

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2020 .

How can Computer Aided Tolerancing Support Closed Loop Tolerance Engineering

Sandro Wartzack, Benjamin Schleich, 2014 .

Contact and Mobility Simulation for Mechanical Assemblies Based on Skin Model Shapes

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2015, J. Comput. Inf. Sci. Eng..

Digital Twin for Variation Management: A General Framework and Identification of Industrial Challenges Related to the Implementation

Rikard Söderberg, Benjamin Schleich, Kristina Wärmefjord, 2020 .

A new approach to first tolerance evaluations in the conceptual design stage based on tolerance graphs

Sandro Wartzack, Benjamin Schleich, Stefan Goetz, 2018 .

Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen

Sandro Wartzack, Benjamin Schleich, Christoph Zirngibl, 2020 .

An Approach to the Sensitivity Analysis in Variation Simulations considering Form Deviations

Sandro Wartzack, Benjamin Schleich, 2018 .

Status and Prospects of Skin Model Shapes for Geometric Variations Management

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2016 .

How to determine the influence of geometric deviations on elastic deformations and the structural performance?

Sandro Wartzack, Benjamin Schleich, 2013 .

On the Selection of Sensitivity Analysis Methods in the Context of Tolerance Management

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2019, Journal of Verification, Validation and Uncertainty Quantification.

A GENERIC APPROACH TO SENSITIVITY ANALYSIS IN GEOMETRIC VARIATIONS MANAGEMENT

Sandro Wartzack, Benjamin Schleich, 2015 .

Approaches for the assembly simulation of skin model shapes

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2015, Comput. Aided Des..

Process-oriented tolerancing - A discrete geometry framework

Sandro Wartzack, Benjamin Schleich, 2013 .

Challenges of Geometrical Variations Modelling in Virtual Product Realization

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2017 .

Evaluation of geometric tolerances and generation of variational part representatives for tolerance analysis

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2015 .

Integration of robust and tolerance design in early stages of the product development process

Stefan Goetz, Benjamin Schleich, Sandro Wartzack, 2020, Research in Engineering Design.

Variation Analysis of Design Parameters of Fibre-Reinforced Plastic Parts

Sandro Wartzack, Michael Franz, Benjamin Schleich, 2019, Proceedings of the Design Society: International Conference on Engineering Design.

Design for X (DFX)

Sandro Wartzack, Michael Walter, Benjamin Schleich, 2018, Handbuch Konstruktion.

Comparison of Different Sensitivity Analysis Methods in the Context of Dimensional Management

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2017 .

Fuzzy Sensitivity Analysis in the Context of Dimensional Management

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2018, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg.

The Implications of the Skin Model Concept for Computer Aided Tolerancing

Sandro Wartzack, Benjamin Schleich, 2013 .

Skin Model Shapes: Offering New Potentials for Modelling Product Shape Variability

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2015 .

Shaping the digital twin for design and production engineering

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2017 .

Ontology-based approach for the provision of simulation knowledge acquired by Data and Text Mining processes

Sandro Wartzack, Benjamin Schleich, Christoph Zirngibl, 2019, Adv. Eng. Informatics.

Concept development for innovative products - A challenge for engineering design education

Sandro Wartzack, Benjamin Schleich, Thomas Luft, 2013 .

Automotive Premium Quality Improvement by High-End-Visualization

Sandro Wartzack, Benjamin Schleich, Daniel Zielinski, 2017 .

An Overview and Classification of Tolerance Compensation Methods

Sandro Wartzack, Benjamin Schleich, Alexander Aschenbrenner, 2019, Proceedings of the Design Society: International Conference on Engineering Design.

Metaproperty-Guided Deletion from the Instance-Level of a Knowledge Base

Steffen Staab, Sandro Wartzack, Benjamin Schleich, 2018, EKAW.

Skin Model Shapes: A new paradigm shift for geometric variations modelling in mechanical engineering

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2014, Comput. Aided Des..

Methodology for plausibility checking of structural mechanics simulations using deep learning on existing simulation data

Tobias C. Spruegel, Sandro Wartzack, Christopher Sauer, 2018 .

DATA DRIVEN DESIGN SELECTION AND GENERATION - AN INDUSTRIAL CASE STUDY ON ELECTRIC MOTORS

Sandro Wartzack, Benjamin Schleich, Matthias Koch, 2018 .

Comparative Study on Tolerance Analysis Approaches

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2014 .

Shifting value stream patterns along the product lifecycle with digital twins

John Ahmet Erkoyuncu, Marc-André Dittrich, Benjamin Schleich, 2019, Procedia CIRP.

A Knowledge-Based Engineering Workbench for Automated Tolerance Specification

Benjamin Schleich, Bjoern Heling, Christopher Sauer, 2019 .

From solid modelling to skin model shapes: Shifting paradigms in computer-aided tolerancing

Sandro Wartzack, Nabil Anwer, Benjamin Schleich, 2014 .

Consistent digitalization of engineering design – an ontology-based approach

Sandro Wartzack, Benjamin Schleich, Patricia Kügler, 2018 .

Konzept für den MBSE-Einsatz zur automatisierten Individualisierung von komplexen Produkten

Sandro Wartzack, Benjamin Schleich, Friedrich-Alexander-Universität Erlangen-Nürnberg, 2019 .

Cost Optimality in Testing and Rejuvenation

Benjamin Schleich, Michael Grottke, 2012, 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops.

13th CIRP Conference on Computer Aided Tolerancing Tolerance Analysis of rotating Mechanism based on Skin Model Shapes in discrete Geometry

Sandro Wartzack, Benjamin Schleich, 2015 .

Novel approaches for the assembly simulation of rigid Skin Model Shapes in tolerance analysis

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2018, Comput. Aided Des..

CAD-Based Tolerance Analysis in Preliminary Design Stages Enabling Early Tolerance Evaluation

Sandro Wartzack, Benjamin Schleich, Stefan Goetz, 2018 .

How does testing affect the availability of aging software systems?

Benjamin Schleich, Michael Grottke, Michael Grottke, 2013, Perform. Evaluation.

Ein Klassifizierungssystem zur Anforderungssystematisierung

Sandro Wartzack, Benjamin Schleich, Friedrich-Alexander-Universität Erlangen-Nürnberg, 2019 .

Simultaneous Development of a Self-learning Engineering Assistance System

Sandro Wartzack, Benjamin Schleich, Christopher Sauer, 2021 .

Virtuelle Toleranzbeurteilung abweichungsbehafteter Bauteile

Sandro Wartzack, Benjamin Schleich, 2012 .

From tolerance allocation to tolerance-cost optimization: a comprehensive literature review

Sandro Wartzack, Benjamin Schleich, Martin Hallmann, 2020, The International Journal of Advanced Manufacturing Technology.

Geometrical Variations Management 4.0: towards next Generation Geometry Assurance

Sandro Wartzack, Rikard Söderberg, Benjamin Schleich, 2018 .

Consideration and Impact Assessment of Measurement Uncertainty in the Context of Tolerance Analysis

Sandro Wartzack, Benjamin Schleich, Tino Hausotte, 2019 .

Motion Tolerancing Based on Skin Model Shapes by Form Deviation Parametrization and Meta-Modelling

Sandro Wartzack, Benjamin Schleich, 2017 .

A discrete geometry approach for tolerance analysis of mechanism

Sandro Wartzack, Benjamin Schleich, 2014 .

Robust-Design-Optimization of mechanisms based on kinematic requirements considering uncertainties

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2018 .

Comparison of different methods for scrap rate estimation in sampling-based tolerance-cost-optimization

Sandro Wartzack, Benjamin Schleich, Björn Heling, 2018 .

A function-oriented surface reconstruction framework for reverse engineering

Sandro Wartzack, Nabil Anwer, Yifan Qie, 2021 .

DETECTION AND CLASSIFICATION OF SYMBOLS IN PRINCIPLE SKETCHES USING DEEP LEARNING

Sandro Wartzack, Benjamin Schleich, Sebastian Bickel, 2021, Proceedings of the Design Society.

DIGITAL TWINS - DEFINITIONS, CLASSES AND BUSINESS SCENARIOS FOR DIFFERENT INDUSTRY SECTORS

Sandro Wartzack, Benjamin Schleich, Fabian Wilking, 2021, Proceedings of the Design Society.

Integrated Tolerance and Fixture Layout Design for Compliant Sheet Metal Assemblies

Sandro Wartzack, Rikard Söderberg, Benjamin Schleich, 2021, Applied Sciences.

Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming

Robert Schulte, Eduard Reithmeier, Sandro Wartzack, 2021, Sensors.

A ROBUST DESIGN RESEARCH LANDSCAPE - REVIEW ON THE IMPORTANCE OF DESIGN RESEARCH FOR ACHIEVING PRODUCT ROBUSTNESS

Benjamin Schleich, Tobias Eifler, B. Schleich, 2021, Proceedings of the Design Society.

PROCEDURE MODEL FOR STRUCTURED RELATIONAL MODELING OF REQUIREMENTS TO SUPPORT REQUIREMENTS-ORIENTED DECISION MAKING

Sandro Wartzack, Benjamin Schleich, Dennis Horber, 2021, Proceedings of the Design Society.

AN APPROACH FOR SEMI-AUTOMATIC REDESIGN OF MECHATRONIC PRODUCTS BY MULTIDISCIPLINARY OPTIMISATION

Sandro Wartzack, Benjamin Schleich, Leonie Walter, 2021, Proceedings of the Design Society.

A SYSTEMATIC COLLECTION OF NATURAL INTERACTIONS FOR IMMERSIVE MODELING FROM BUILDING BLOCKS

Sandro Wartzack, Benjamin Schleich, Jakob Harlan, 2021, Proceedings of the Design Society.

Process and machine selection in sampling-based tolerance-cost optimisation for dimensional tolerancing

Sandro Wartzack, Benjamin Schleich, Martin Hallmann, 2021, Int. J. Prod. Res..

Sampling-based tolerance analysis: the key to establish tolerance-cost optimization in the product development process

Sandro Wartzack, Benjamin Schleich, Martin Hallmann, 2021 .

Comparative evaluation of WIMP and immersive natural finger interaction: a user study on CAD assembly modeling

Sandro Wartzack, Benjamin Schleich, Marius Fechter, 2021 .

Functional Analysis of Components Manufactured by a Sheet-Bulk Metal Forming Process

Robert Schulte, Sandro Wartzack, Benjamin Schleich, 2021 .

Statistical Tolerance Analysis of 3D-Printed Non-Assembly Mechanisms in Motion Using Empirical Predictive Models

Sandro Wartzack, Benjamin Schleich, Paul Schaechtl, 2021 .

APPROACH FOR THE AUTOMATED AND DATA-BASED DESIGN OF MECHANICAL JOINTS.

Sandro Wartzack, Benjamin Schleich, Christoph Zirngibl, 2021, Proceedings of the Design Society.

A Comprehensive Framework for Skin Model Simulation

Sandro Wartzack, Nabil Anwer, Michael Walter, 2012 .

Approach and application to transfer heterogeneous simulation data from finite element analysis to neural networks

Tobias C. Spruegel, Sandro Wartzack, Benjamin Schleich, 2020, J. Comput. Des. Eng..

Gap hull estimation for rigid mechanical joints considering form deviations and multiple pairs of mating surfaces

Sandro Wartzack, Benjamin Schleich, S. Wartzack, 2018, Mechanism and Machine Theory.