W. Shack

发表

Effects of LWR coolant environments on fatigue design curves of carbon and low-alloy steels

O. K. Chopra, W. J. Shack, O. Chopra, 1998 .

Stress Corrosion Cracking Susceptibility of AISI 316 NG and 316 Stainless Steel in an Impurity Environment

P. Maiya, W. Shack, 1985 .

Low-cycle fatigue of piping and pressure vessel steels in LWR environments

Omesh K. Chopra, William J. Shack, O. Chopra, 1998 .

Stress Corrosion Cracking of Candidate Material for Nuclear Waste Containers

T. Kassner, P. Maiya, W. Shack, 1990 .

Evaluation of precipitates used in strainer head loss testing: Part II. Precipitates by in situ aluminum alloy corrosion☆

K. Kasza, K. Natesan, C. Bahn, 2011 .

Statistical Determination of Surface Flaw Density in Brittle Materials

F. Mcclintock, J. Matthews, W. Shack, 1976 .

The Stress Corrosion Cracking Behavior of Alloys 690 and 152 Weld in a PWR Environment

William J. Shack, Bogdan Alexandreanu, Omesh K. Chopra, 2008 .

The effect of LWR coolant environments on the fatigue life of reactor materials.

William J. Shack, Omesh K. Chopra, O. Chopra, 2006 .

Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability.

O. K. Chopra, W. J. Shack, O. Chopra, 2003 .

Effects of alloy chemistry, cold work, and water chemistry on corrosion fatigue and stress corrosion cracking of nickel alloys and welds.

O. Chopra, W. Shack, W. Soppet, 2001 .

Crack growth rates and metallographic examinations of Alloy 600 and Alloy 82/182 from field components and laboratory materials tested in PWR environments.

William J. Shack, Bogdan Alexandreanu, O. K. Chopra, 2008 .

Experimental simulation of Na and Cl hideout in steam generator crevices

K. Kasza, C. Bahn, J. Park, 2012 .

Crack growth rates of nickel alloy welds in a PWR environment.

W. J. Shack, B. Alexandreanu, O. Chopra, 2006 .

Effect of material heat treatment on fatigue crack initiation in austenitic stainless steels in LWR environments.

William J. Shack, Bogdan Alexandreanu, O. K. Chopra, 2005 .

Crack growth rates and fracture toughness of irradiated austenitic stainless steels in BWR environments.

O. K. Chopra, W. J. Shack, O. Chopra, 2008 .

Stress corrosion cracking of candidate waste container materials

D. Diercks, T. Kassner, P. Maiya, 1990 .

Mechanical properties of the mammalian vas deferens. I. In the passive state.

T. Lardner, S. K. Batra, I. Krepchin, 1979, Archives of andrology.

Mechanical properties of thermally aged cast stainless steels from Shippingport reactor components

O. Chopra, W. Shack, 1995 .

Cracking Behavior and Microstructure of Austenitic Stainless Steels and Alloy 690 Irradiated in BOR-60 Reactor, Phase I.

Y. Chen, Yong Yang, T. Allen, 2010 .

Radiation embrittlement of the neutron shield tank from the Shippingport reactor

S. T. Rosinski, Omesh K. Chopra, W. J. Shack, 1991 .

The swimming of spermatozoa in an active channel.

T. Lardner, R. Smelser, W. Shack, 1974, Journal of biomechanics.

A long wavelength solution for a microorganism swimming in a channel.

T. Lardner, W. Shack, 1974, Bulletin of mathematical biology.

Modeling of weld residual stresses in core shroud structures

Michael B. McNeil, Pingsha Dong, Frederick W. Brust, 2000 .

Fracture Toughness and Crack Growth Rates of Irradiated Austenitic Stainless Steels

E. E. Gruber, W. J. Shack, O. Chopra, 2003 .

A Note on Peristaltic Pumping

T. Lardner, M. Negrin, W. Shack, 1974 .

IASCC susceptibility of austenitic stainless steels and Alloy 690 in high dissolved oxygen water environment.

N. D. Rago, Y. Chen, O. Chopra, 2007 .

Chemical effects head-loss research in support of generic safety issue 191.

K. Kasza, J. Oras, K. Natesan, 2006 .

Overview of Fatigue Crack Initiation in Carbon and Low-Alloy Steels in Light Water Reactor Environments

Omesh K. Chopra, W. J. Shack, O. Chopra, 1999 .

Observations on the hydrodynamics and swimming motions of mammalian spermatozoa.

T. Lardner, C. Fray, W. Shack, 1974, Bulletin of mathematical biology.

Applicability of hydrodynamic analyses of spermatozoan motion.

T. Lardner, W. Shack, A. P. Yundt, 1975, The Journal of experimental biology.

Analysis of potential for jet-impingement erosion from leaking steam generator tubes during severe accidents.

Saurin Majumdar, William J. Shack, D. R. Diercks, 2002 .

Some Criteria for the Measurement of Rainfall and Runoff

P. S. Eagleson, W. J. Shack, W. Shack, 1966 .

The erosion of a Type 310 stainless steel cyclone from a coal gasification pilot plant

S. Danyluk, J. Park, W. Shack, 1980 .

Effects of LWR environments on fatigue life of carbon and low-alloy steels

O. K. Chopra, W. J. Shack, O. Chopra, 1995 .

Review of environmental effects on fatigue crack growth of austenitic stainless steels.

W. J. Shack, T. F. Kassner, T. Kassner, 1994 .

Stress Corrosion Crack Growth Rates in Type 304 Stainless Steel in Simulated BWR Environments

W. Ruther, T. Kassner, J. Park, 1986 .

Environmentally assisted cracking of alloys 600 and 690 in simulated LWR water.

O. Chopra, W. Shack, 2001 .

Environmentally assisted cracking in light water reactors. Semiannual report, July 1998-December 1998.

E. E. Gruber, J. Smith, H. Chung, 1999 .

Fatigue strain-life behavior of carbon and low-alloy steels, austenitic stainless steels, and Alloy 600 in LWR environments

Jeffrey M. Keisler, William J. Shack, Omesh K. Chopra, 1995 .

A Review of the Effects of Coolant Environments on the Fatigue Life of LWR Structural Materials

Omesh K. Chopra, W. J. Shack, O. Chopra, 2009 .

Current research on environmentally assisted cracking in light water reactor environments

Pingsha Dong, J. Zhang, Frederick W. Brust, 1999 .

Cilia transport.

T. Lardner, W. Shack, 1972, The Bulletin of mathematical biophysics.

Statistical models for estimating fatigue strain-life behavior of pressure boundary materials in light water reactor environments

Jeffrey M. Keisler, William J. Shack, Omesh K. Chopra, 1996 .

Fatigue crack initiation in carbon and low-alloy steels in light water reactor environments : mechanism and prediction.

O. K. Chopra, W. J. Shack, O. Chopra, 1998 .

Large amplitude motion of self-propelling slender filaments at low Reynolds numbers.

T. Lardner, J. Shen, P. Y. Tam, 1975, Journal of biomechanics.

Slow Strain Rate Tensile Tests of Irradiated Austenitic Stainless Steels in Simulated PWR Environment

Yiren Chen, K. Natesan, B. Alexandreanu, 2011 .