Luca Cristofolini

发表

METHODS FOR THE CHARACTERIZATION OF THE LONG-TERM MECHANICAL PERFORMANCE OF CEMENTS FOR VERTEBROPLASTY AND KYPHOPLASTY: CRITICAL REVIEW AND SUGGESTIONS FOR TEST METHODS

Valentina Danesi, Cesare Faldini, Luca Cristofolini, 2017 .

Intra-operative evaluation of cementless hip implant stability: a prototype device based on vibration analysis.

Angelo Cappello, Luca Cristofolini, Maurizio Lannocca, 2007, Medical engineering & physics.

A Device to Test the Primary Stability in Cementless Hip Arthroplasty Through Mechanical Vibrations

Angelo Cappello, Luca Cristofolini, Maurizio Lannocca, 2006 .

Multiscale investigation of the functional properties of the human femur

Fabio Baruffaldi, Marco Viceconti, Luca Cristofolini, 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Comments on "Femoral surface strain in intact composite femurs: A custom computer analysis of the photoelastic coating technique" [with reply]

Marco Viceconti, Luca Cristofolini, Rita M. Patterson, 2001, IEEE Trans. Biomed. Eng..

Accurate prediction of strain values from subject specific finite element models of long bones

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2006 .

Experimental testing of the cement locked uncemented (CLU) hip stem

Luca Cristofolini, 1999 .

Finite element modeling of resurfacing hip prosthesis: estimation of accuracy through experimental validation.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2010, Journal of biomechanical engineering.

Local Stress Models for Variable Loads

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

Anatomical Reference Frames for Long Bones: Biomechanical Applications

Luca Cristofolini, L. Cristofolini, 2012 .

Fatigue-fractured surfaces of commercial bone cements

Marco Viceconti, Luca Cristofolini, Massimiliano Baleani, 2007 .

IN-VITRO STRAIN DISTRIBUTION DURING SIDEWAYS FALL IN THE PROXIMAL HUMAN FEMUR

Marco Viceconti, Luca Cristofolini, Lorenzo Zani, 2012 .

Mechanical testing of bones: the positive synergy of finite–element models and in vitro experiments

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Introduction to Holographic Interferometry

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

Experimental Stress Analysis for Materials and Structures. Stress Analysis Models for Developing Design Methodologies

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

EXPERIMENTAL METHODS FOR THE BIOMECHANICAL INVESTIGATION OF THE HUMAN SPINE: A REVIEW

Marco Viceconti, Luca Cristofolini, Nicola Brandolini, 2014 .

FOR WHICH LOADING SCENARIOS IS THE PROXIMAL FEMUR OPTIMIZED

Marco Viceconti, Luca Cristofolini, Lorenzo Zani, 2012 .

Primary stability of an anatomical cementless hip stem: a statistical analysis.

Marco Viceconti, Luca Cristofolini, Alberto Pancanti, 2006, Journal of biomechanics.

FE PREDICTION OF STRAINS FOR PATIENT-SPECIFIC PROXIMAL FEMURS GENERATED FROM A SINGLE DXA

Alejandro F. Frangi, Marco Viceconti, Luca Cristofolini, 2012 .

Orbital stability of walking: in-silico assessment of a walking model

Luca Cristofolini, Rita Stagni, Federico Riva, 2012 .

A pictographic atlas for classifying damage modes on polyethylene bearings

Marco Viceconti, Luca Cristofolini, Susanna Stea, 2011, Journal of materials science. Materials in medicine.

Static Stress Models

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

DIFFERENCES IN TRABECULAR ANISOTROPY BETWEEN OSTEOARTHRITIC AND NORMAL BONE

Fabio Baruffaldi, Marco Viceconti, Luca Cristofolini, 2008 .

ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion, I: ankle, hip, and spine

Hartmut Witte, Alberto Leardini, Dieter Rosenbaum, 2002 .

VARIATION OF RESULTS WITH NUMBER OF MATERIAL PROPERTIES IN A HUMAN TIBIA FINITE ELEMENT MODEL

Luca Cristofolini, Harinderjit Gill, Amy B. Zavatsky, 2008 .

Multiaxial miniaturized load cell for measuring forces acting through a sternotomy

Marco Viceconti, Luca Cristofolini, Massimiliano Baleani, 2006 .

Modular hip stems: determination of disassembly force of a neck-stem coupling.

Luca Cristofolini, Francesco Pallini, Francesco Traina, 2007, Artificial organs.

Strains induced by thigh muscles in the proximal femur

Marco Viceconti, Luca Cristofolini, Aldo Toni, 1994 .

Stem damage during implantation of modular hip prostheses.

Marco Viceconti, Luca Cristofolini, Elena Varini, 2006, Artificial organs.

Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2006, Journal of biomechanics.

Pre-clinical validation of joint prostheses: a systematic approach.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2009, Journal of the mechanical behavior of biomedical materials.

ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion--part I: ankle, hip, and spine. International Society of Biomechanics.

Hartmut Witte, Alberto Leardini, Dieter Rosenbaum, 2002, Journal of biomechanics.

MULTI-SCALE TESTING OF THE MECHANICAL PROPERTIES OF THE HUMAN FEMORAL DIAPHYSIS

Luca Cristofolini, Massimiliano Baleani, Enrico Schileo, 2008 .

PREDICTION OF FAILURE LOAD AND LOCATION ON PROXIMAL FEMUR UNDER A SINGLE STANCE LOADING CONDITION

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2008 .

Comparison of three standard anatomical reference frames for the tibia-fibula complex.

Alberto Leardini, Marco Viceconti, Luca Cristofolini, 2008, Journal of biomechanics.

Subject-specific finite element models can accurately predict strain levels in long bones.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2007, Journal of biomechanics.

Impact of CT image deblurring on the accuracy of CT-based finite element modelling of the proximal femur

Cari M. Whyne, Luca Cristofolini, Fulvia Taddei, 2016 .

Finite-Element Modeling of Bones From CT Data: Sensitivity to Geometry and Material Uncertainties

Barbara Reggiani, Marco Viceconti, Luca Cristofolini, 2006, IEEE Transactions on Biomedical Engineering.

USE OF DIGITAL IMAGE CORRELATION TO INVESTIGATE THE BIOMECHANICS OF THE VERTEBRA

Luca Cristofolini, Marco Palanca, T. M. Brugo, 2015 .

Some applications of statistical methods to experimental mechanics investigations

Luca Cristofolini, 1998 .

Experimentally validated finite element model of a human tibia

Luca Cristofolini, Harinderjit Gill, Amy B. Zavatsky, 2006 .

The use of digital image correlation in the biomechanical area: a review

Gianluca Tozzi, Luca Cristofolini, Marco Palanca, 2016 .

Comments on ‘Experimental versus computational analysis of micromotions at the implant - bone interface’

Marco Viceconti, Luca Cristofolini, Paolo Erani, 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

ICCB2009: Book of Abstracts: IV International Congress on Computational Bioengineering including the first European Symposium on Biomedical Integrative Research

Marco Viceconti, Luca Cristofolini, Rita Stagni, 2009 .

GLOBAL TO LOCAL ANALYSIS OF ANISOTROPY IN OSTEOARTHRITIC BONE

Fabio Baruffaldi, Marco Viceconti, Luca Cristofolini, 2008 .

In vitro evidence of the structural optimization of the human skeletal bones.

Luca Cristofolini, L. Cristofolini, 2015, Journal of biomechanics.

FE PROBABILISTIC APPROACH TO DEFINE THE CLINICAL INDICATIONS OF A NEW PROXIMAL EPIPHYSEAL REPLACEMENT

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2008 .

Primary stability assessment in hip arthroplasty — a device based on the vibrational technique

Angelo Cappello, Luca Cristofolini, Maurizio Lannocca, 2006 .

Response to Letter to the Editor: Comparative in vitro study on the long-term performance of cemented hip stems: Validation of a protocol to discriminate between ‘‘good’’ and ‘‘bad’’ designs

Angelo Cappello, Luca Cristofolini, Aldo Toni, 2006 .

Overview of Digital Image Correlation

Luca Cristofolini, 2015 .

Investigation on the fatigue limit of hip prostheses with different surface treatments

Marco Viceconti, Luca Cristofolini, Massimiliano Baleani, 1998 .

Development and validation of a technique for strain measurement inside polymethyl methacrylate

Marco Viceconti, Luca Cristofolini, M. Viceconti, 2000 .

Critical Examination of Stress Shielding Evaluation of Hip Prostheses.

Luca Cristofolini, 2017, Critical reviews in biomedical engineering.

Discrimination of PMMA fatigue crack surface

Luca Cristofolini, Massimiliano Baleani, Maria Chiara Bignozzi, 2006 .

In vitro load history to evaluate the effects of daily activities on cemented hip implants

Marco Viceconti, Luca Cristofolini, Amelia Saponara Teutonico, 2003 .

Improvement of experimental-numerical cross-validation in studies of the proximal femur

Luca Cristofolini, Fulvia Taddei, Enrico Schileo, 2006 .

Strains in composite hip joint reconstructions obtained through FEA and experiments correspond closely

Hwj Rik Huiskes, Luca Cristofolini, Njj Nico Verdonschot, 2000 .

Standardization of hemipelvis alignment for in vitro biomechanical testing

Luca Cristofolini, Francesco Traina, Federico Morosato, 2018, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Subject-specific finite element models implementing a maximum principal strain criterion are able to estimate failure risk and fracture location on human femurs tested in vitro.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2008, Journal of biomechanics.

CEMENTLESS HIP STEM PRIMARY STABILITY: AN INTRA-OPERATIVE DEVICE

Luca Cristofolini, Elena Varini, Aldo Toni, 2005 .

Introduction to Photoelasticity

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

A Method to Improve Experimental Validation of Finite‐Element Models of Long Bones

Marco Viceconti, Luca Cristofolini, Saulo Martelli, 2008 .

ANATOMICAL REFERENCE FRAME TO GRANT REPRODUCIBLE IN VITRO BIOMECHANICAL TESTING OF THE HUMAN HEMI-PELVIS

Luca Cristofolini, F. Morosato, 2017 .

Subject -specific FE model for the prediction of the relative micromotion in a total hip implant: verification and validation

Barbara Reggiani, Marco Viceconti, Luca Cristofolini, 2005 .

Stress Models in Biomechanics

Luca Cristofolini, L. Cristofolini, 2015 .

SENSITIVITY OF STRAIN IN THE VERTEBRAL BODY TO LOADING DIRECTION

Marco Viceconti, Valentina Danesi, Luca Cristofolini, 2012 .

PRE-CLINICAL VALIDATION OF A NEW PROXIMAL EPIPHYSEAL REPLACEMENT: DESIGN REVISION AND OPTIMISATION BY MEANS OF FINITE ELEMENT MODELS

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2008 .

Multiscale modelling of the skeleton for the prediction of the risk of fracture.

Fabio Baruffaldi, Alberto Leardini, Marco Viceconti, 2008, Clinical biomechanics.

ANATOMICAL AXES FOR THE HUMAN TIBIA AND FIBULA: ASSESSMENT OF TWO REFERENCE SYSTEMS

Marco Viceconti, Luca Cristofolini, Andrea Malandrino, 2008 .

In Vitro Experimental Studies and Numerical Modeling to Investigate the Biomechanical Effects of Surgical Interventions on the Spine.

Cesare Faldini, Luca Cristofolini, Maria Luisa Ruspi, 2019, Critical reviews in biomedical engineering.

A CT-based method to compute femur remodelling after total hip arthroplasty

Luca Cristofolini, Paolo Bifulco, Luigi Iuppariello, 2020, Comput. methods Biomech. Biomed. Eng. Imaging Vis..

Digital Image Correlation (DIC) Assessment of the Non-Linear Response of the Anterior Longitudinal Ligament of the Spine during Flexion and Extension

Luca Cristofolini, Tomaso Villa, Fabio Galbusera, 2020, Materials.

Comparative in vitro study on the long term performance of cemented hip stems: validation of a protocol to discriminate between "good" and "bad" designs.

Angelo Cappello, Luca Cristofolini, Aldo Toni, 2003, Journal of biomechanics.

Strain uncertainties from two digital volume correlation approaches in prophylactically augmented vertebrae: Local analysis on bone and cement-bone microstructures.

Gianluca Tozzi, Luca Cristofolini, Marco Palanca, 2017, Journal of the mechanical behavior of biomedical materials.

Micro Finite Element models of the vertebral body: Validation of local displacement predictions

Gianluca Tozzi, Marco Viceconti, Valentina Danesi, 2017, PloS one.

Three-dimensional local measurements of bone strain and displacement: comparison of three digital volume correlation approaches.

Gianluca Tozzi, Marco Viceconti, Luca Cristofolini, 2015, Journal of biomechanical engineering.

Patient-specific mobility assessment to monitor recovery after total hip arthroplasty

Luca Cristofolini, Paolo Bifulco, Mario Cesarelli, 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A Novel Method for Determining the Time and Location of Abrupt Fracture Initiation in Bones

Marco Viceconti, Luca Cristofolini, Enrico Schileo, 2010 .

The Size of Simulated Lytic Metastases Affects the Strain Distribution on the Anterior Surface of the Vertebra.

Luca Cristofolini, Marco Palanca, L. Cristofolini, 2018, Journal of biomechanical engineering.

In vitro long-term fatigue endurance of the secondary "Cement Injection Stem" hip prosthesis.

Marco Viceconti, Luca Cristofolini, Volkmar Jansson, 2007, Artificial organs.

Full-field in vitro investigation of hard and soft tissue strain in the spine by means of Digital Image Correlation.

Cesare Faldini, Luca Cristofolini, Marco Palanca, 2017, Muscles, ligaments and tendons journal.

INTRA-OPERATIVE TESTS ON CEMENTLESS HIP STEM MECHANICAL STABILITY

Angelo Cappello, Luca Cristofolini, Elena Varini, 2006 .

Biomechanical testing of the proximal femoral epiphysis: Intact and implanted condition

Luca Cristofolini, Elena Varini, Fulvia Taddei, 2006 .

Assessment of implant stability of cementless hip prostheses through the frequency response function of the stem–bone system

Angelo Cappello, Luca Cristofolini, Maurizio Lannocca, 2010 .

Structural behaviour and strain distribution of the long bones of the human lower limbs.

Marco Viceconti, Luca Cristofolini, Serge Van Sint Jan, 2010, Journal of biomechanics.

A methodology and criterion for acrylic bone cement fatigue tests

Marco Viceconti, Luca Cristofolini, M. Viceconti, 2000 .

A PRELIMINARY IN VITRO BIOMECHANICAL EVALUATION OF PROPHYLACTIC CEMENT AUGMENTATION OF THE THORACOLUMBAR VERTEBRAE

Marco Viceconti, Valentina Danesi, Luca Cristofolini, 2016 .

Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone.

Luca Cristofolini, Stephen J Ferguson, Cecilia Persson, 2013, Journal of the mechanical behavior of biomedical materials.

Strain distribution in the proximal Human femur during in vitro simulated sideways fall.

Luca Cristofolini, Fulvia Taddei, Paolo Erani, 2015, Journal of biomechanics.

Are spontaneous fractures possible? An example of clinical application for personalised, multiscale neuro-musculo-skeletal modelling.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2012, Journal of biomechanics.

Comparison of uniaxial and triaxial rosette gages for strain measurement in the femur

Marco Viceconti, Luca Cristofolini, M. Viceconti, 1997 .

Strain distribution in the lumbar vertebrae under different loading configurations.

Marco Viceconti, Valentina Danesi, Luca Cristofolini, 2013, The spine journal : official journal of the North American Spine Society.

In vitro replication of spontaneous fractures of the proximal human femur.

Marco Viceconti, Luca Cristofolini, Fulvia Taddei, 2007, Journal of biomechanics.

Comparison of different filtering strategies to reduce noise in strain measurement with digital image correlation

Luca Cristofolini, Fabiana Zama, L. Cristofolini, 2016 .

Feasibility study for a clinical application of digital volume correlation

Gianluca Tozzi, Luca Cristofolini, Gordon W. Blunn, 2017 .

Strain patterns induced by press-fitting and by an external load in hip arthroplasty: A photoelastic coating study on bone models

Marco Viceconti, Luca Cristofolini, M. Viceconti, 2003 .

Experimental errors in the application of photoelastic coatings on human femurs with uncemented hip stems

Angelo Cappello, Luca Cristofolini, Aldo Toni, 1994 .

Full-field strain distribution in multi-vertebra spine segments: An in vitro application of digital image correlation.

Miguel Marco, Luca Cristofolini, Marco Palanca, 2017, Medical engineering & physics.

In vitro measured strains in the loaded femur: Quantification of experimental error

Marco Viceconti, Luca Cristofolini, M. Viceconti, 1997 .

Application of digital volume correlation to study the efficacy of prophylactic vertebral augmentation.

Gianluca Tozzi, Valentina Danesi, Luca Cristofolini, 2016, Clinical biomechanics.

Elastic Full‐Field Strain Analysis and Microdamage Progression in the Vertebral Body from Digital Volume Correlation

Gianluca Tozzi, Valentina Danesi, Luca Cristofolini, 2016 .

Increased long-term failure risk associated with excessively thin cement mantle in cemented hip arthroplasty: a comparative in vitro study.

Marco Viceconti, Luca Cristofolini, Paolo Erani, 2007, Clinical biomechanics.

Introduction to Inverse Problems

Alessandro Freddi, Giorgio Olmi, Luca Cristofolini, 2015 .

Fatigue strength of shot-peened nitrided steel: optimization of process parameters by means of design of the experiment

Alessandro Freddi, Luca Cristofolini, Dario Croccolo, 2002 .

Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: An organ-level study.

Gianluca Tozzi, Valentina Danesi, Luca Cristofolini, 2016, Journal of biomechanics.

Reproducible reference frame for in vitro testing of the human vertebrae.

Valentina Danesi, Luca Cristofolini, Lorenzo Zani, 2014, Journal of biomechanics.

Partially cemented AncaDualFit hip stems do not fail in simulated active patients.

Marco Viceconti, Luca Cristofolini, Francesco Traina, 2007, Clinical biomechanics.

Can the rasp be used to predict intra-operatively the primary stability that can be achieved by press-fitting the stem in cementless hip arthroplasty?

Marco Viceconti, Luca Cristofolini, Elena Varini, 2008, Clinical biomechanics.