Hanxiong Huang

发表

Formation mechanism of crystal morphologies in LLDPE/HDPE blends investigated via water-assisted and conventional injection molding

Bin Wang, Hanxiong Huang, 2012 .

Polymorphism in polyamide 6 and polyamide 6/clay nanocomposites molded via water-assisted injection molding

Weishan Zhou, Hanxiong Huang, Bin Wang, 2012 .

Tailoring the crystalline structure of polypropylene parts molded through water‐assisted injection molding: Effects of melt temperature and polymeric nucleating agent

Bin Wang, Hanxiong Huang, Hanxiong Huang, 2013 .

Fiber orientation propelled by high-pressure water penetration in water-assisted injection molded fiber-reinforced thermoplastics part

Can Yang, Hanxiong Huang, Run-Heng Zhou, 2013 .

FORMATION MECHANISM OF TRANSCRYSTALS IN PP/SAN BLENDS PREPARED VIA WATER-ASSISTED INJECTION MOLDING: FORMATION MECHANISM OF TRANSCRYSTALS IN PP/SAN BLENDS PREPARED VIA WATER-ASSISTED INJECTION MOLDING

Zhi-Yong Wang, Bin Wang, Hanxiong Huang, 2012 .

Preliminary investigation on morphology in water-assisted injection molded polymer blends

Hanxiong Huang, Run-Heng Zhou, Hanxiong Huang, 2010 .

Effects and optimization of processing parameters in water‐assisted injection molding

Hanxiong Huang, Zhi-Wu Deng, Hanxiong Huang, 2008 .

Effects of Process Parameters on Shrinkage Uniformity and Birefringence of Injection-Compression Molded Parts

Can Yang, Kun Li, Hanxiong Huang, 2008 .

Largely toughening biodegradable poly(lactic acid)/thermoplastic polyurethane blends by adding MDI

Shuidong Zhang, Hanxiong Huang, Fei Zhao, 2015 .

Thermal and Mechanical Properties of PA66 Short Fiber-Reinforced Poly(propylene carbonate) Composite via Hydrogen Bonding Interaction and Its Rheological Responses

Hanxiong Huang, G. Jiang, Shuidong Zhang, 2016 .

Structure, and thermal and mechanical properties of poly(propylene carbonate) capped with different types of acid anhydride via reactive extrusion

Mengdi Zhang, G. Jiang, Shuidong Zhang, 2016 .

Influence of Starch Oxidization and Modification on Interfacial Interaction, Rheological Behavior, and Properties of Poly(Propylene Carbonate)/Starch Blends

N. Zhao, G. Jiang, Shuidong Zhang, 2017 .

Structure and improved properties of PPC/PBAT blends via controlling phase morphology based on melt viscosity

G. Jiang, Feng Wang, Shuidong Zhang, 2020 .

Improving polypropylene microcellular foaming through blending and the addition of nano-calcium carbonate

Hanxiong Huang, Jian-Kang Wang, Hanxiong Huang, 2007 .

Foaming of Poly(lactic acid) Using Supercritical Carbon Dioxide as Foaming Agent: Influence of Crystallinity and Spherulite Size on Cell Structure and Expansion Ratio

Lin-Qiong Xu, Hanxiong Huang, Hanxiong Huang, 2014 .

Structure and Properties of Maleic Anhydride Capped Poly(propylene carbonate) Produced by Reactive Extrusion and Effect of Resistance Time on Reaction Efficiency

Hanxiong Huang, G. Jiang, Shuidong Zhang, 2014 .

Preparation and characterization of biodegradable polylactide/thermoplastic polyurethane elastomer blends

Juan Han, Hanxiong Huang, Hanxiong Huang, 2011 .

Simultaneously facilitating dispersion and thermal reduction of graphene oxide to enhance thermal conductivity of poly(vinylidene fluoride)/graphene nanocomposites by water in continuous extrusion

Hanxiong Huang, Min Wu, J. Tong, 2018, Chemical Engineering Journal.

Microstructure and thermal behavior of polylactide/clay nanocomposites melt compounded under supercritical CO2

G. Jiang, Zhao Chen, Hanxiong Huang, 2011 .

Temperature and shear dependence of rheological behavior for thermoplastic polyurethane nanocomposites with carbon nanofillers

Hanxiong Huang, Li-Min Yu, Hanxiong Huang, 2022, Polymer.

In situ fibrillation of polymeric nucleating agents in polypropylene and subsequent transcrystallization propelled by high-pressure water penetration during water-assisted injection molding

Zhi-Yong Wang, Bin Wang, Hanxiong Huang, 2013 .

Combined Approach of Compression Molding and Magnetic Attraction to Micropatterning of Magnetic Polydimethylsiloxane Composite Surfaces with Excellent Anti-Icing/Deicing Performance.

Jinbao Xu, Qiankun Wang, C. Lei, 2021, ACS applied materials & interfaces.

Highly interconnected porous PDMS/CNTs sandwich sponges with anti-icing/deicing microstructured surfaces

Jinbao Xu, Qiankun Wang, Wei Liu, 2021, Journal of Materials Science.

SC–CO2-assisted rubber dispersion and dynamic vulcanization in blending of PP/EPDM thermoplastic olefin

Yang Zhao, Yukun Chen, Hanxiong Huang, 2010 .

Dynamic rheology–morphology relationship of PP/EPDM blends prepared by melt mixing under Sc-CO2

Yang Zhao, Yukun Chen, Hanxiong Huang, 2010 .

Dynamic Rheology and Microstructure of Polypropylene/Clay Nanocomposites Prepared Under Sc-CO2 by Melt Compounding

Hanxiong Huang, Yang Zhao, Hanxiong Huang, 2008 .

Magnetically Driven Superhydrophobic Silica Sponge Decorated with Hierarchical Cobalt Nanoparticles for Selective Oil Absorption and Oil/Water Separation

L. Turng, X. Jing, Hanxiong Huang, 2017 .

Simultaneously toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane blend via enhancing interfacial adhesion by hydrophobic silica nanoparticles

F. Yu, Hanxiong Huang, Hanxiong Huang, 2015 .

Effects of filler–filler and polymer–filler interactions on rheological and mechanical properties of HDPE–wood composites

Hanxiong Huang, Jing-Jing Zhang, Hanxiong Huang, 2009 .

Enhancing thermal conductivity of PMMA/PS blend via forming affluent and continuous conductive pathways of graphene layers

Min Wu, Hanxiong Huang, Hanxiong Huang, 2021 .

Relationship between screw structure and properties of recycled glass fiber reinforced flame retardant nylon 46

G. Jiang, Shuidong Zhang, L. Tan, 2015 .

Preparation and properties of starch oxalate half-ester with different degrees of substitution

Yongbai Tang, Shuidong Zhang, Yu-rong Zhang, 2009 .

Investigation on the uniformity of high‐density polyethylene/wood fiber composites in a twin‐screw extruder

Chul B. Park, G. Rizvi, Qingping Guo, 2009 .

Biomimetic fabrication of micro-/nanostructure on polypropylene surfaces with high dynamic superhydrophobic stability

Hanxiong Huang, Xue Wang, Hanxiong Huang, 2019, Materials Today Communications.

Superhydrophobic SiC/CNTs Coatings with Photothermal Deicing and Passive Anti-Icing Properties.

G. Jiang, Shuidong Zhang, Liang Chen, 2018, ACS applied materials & interfaces.

Squeeze Flow-Induced Hierarchical Morphology in Microinjection Compression Molded Thin-Walled Plates of PP/SAN Blend and Its Nanocomposite with Halloysite Nanotubes

Wei-Sheng Guan, Hanxiong Huang, Bin Wang, 2015 .

Detecting impact toughness of polypropylene/poly(ethylene‐co‐octene) blends with various morphologies induced via chaotic and shear mixing

Hanxiong Huang, Ke Li, Hanxiong Huang, 2012 .

Macro, Micro and Nanostructured Morphologies of Multiphase Polymer Systems

Hanxiong Huang, Hanxiong Huang, Hanxiong Huang, 2011 .

Improving of Cell Structure of Microcellular Foams Based on Polypropylene/High-density Polyethylene Blends

Hanxiong Huang, Jian-Kang Wang, Xiaohao Sun, 2008 .

Self‐reinforcement of polypropylene by flow‐induced crystallization during continuous extrusion

Hanxiong Huang, 1998 .

Equipment development and experimental investigation on the cellular structure of microcellular injection molded parts

Jian-Kang Wang, Hanxiong Huang, 2008 .

Formation mechanism and tuning for bi-modal cell structure in polystyrene foams by synergistic effect of temperature rising and depressurization with supercritical CO2

Lin-Qiong Xu, Hanxiong Huang, 2016 .

Development and application of rapid thermal cycling molding with electric heating for improving surface quality of microcellular injection molded parts

Cheng-Long Xiao, Xing Yang, Hanxiong Huang, 2016 .

Preparation of microcellular polypropylene/polystyrene blend foams with tunable cell structure

Hanxiong Huang, Hong-Fei Xu, Hanxiong Huang, 2011 .

Numerical Simulation on Nucleation and Cell Growth in Microcellular Injection Molding Without Mold

Jian-Kang Wang, Hanxiong Huang, 2006 .

Analysis of Flow Fields in Foaming Die Using Finite Element Method

Jian-Kang Wang, Hanxiong Huang, 2005 .

Rheological behavior of well-dispersed polypropylene/halloysite nanotube composites prepared by water-assisted mixing extrusion

Hanxiong Huang, Yu‐Xiao Huang, Hanxiong Huang, 2019, Iranian Polymer Journal.

Microstructure and mechanical properties of polypropylene/poly (ethylene-co-octene copolymer)/clay ternary nanocomposites prepared by melt blending using supercritical carbon dioxide as a processing aid

Hanxiong Huang, Yang Zhao, Fenghua Su, 2011 .

Mechanical Anisotropy of Self-reinforced Polyethylene Crystallized During Continuous-melt Extrusion

Hanxiong Huang, 1999 .

Continuous extrusion of self-reinforced high density polyethylene

Hanxiong Huang, 1998 .

Influence of polyfunctional monomer on melt strength and rheology of long‐chain branched polypropylene by reactive extrusion

Fenghua Su, Hanxiong Huang, 2010 .

Rheology and melt strength of long chain branching polypropylene prepared by reactive extrusion with various peroxides

Fenghua Su, Hanxiong Huang, Hanxiong Huang, 2010 .

Rheology and thermal behavior of long branching polypropylene prepared by reactive extrusion

Fenghua Su, Hanxiong Huang, 2009 .

Rheology and thermal properties of polypropylene modified by reactive extrusion with dicumyl peroxide and trimethylol propane triacrylate

Fenghua Su, Hanxiong Huang, 2009 .

Viscoelastic behavior and constitutive modeling of PP/HNT composites prepared by water‐assisted extrusion

Hanxiong Huang, Yu‐Xiao Huang, Hanxiong Huang, 2019, Polymer Engineering & Science.

Detecting extensional viscosity of polypropylene melt using the Rheotens test: A comparison between standard and steady state test modes

Hanxiong Huang, Quan Wang, Hanxiong Huang, 2013 .

Structure and melt rheology of long‐chain branching polypropylene/clay nanocomposites

Jia Yan, Fenghua Su, Hanxiong Huang, 2011 .

Effects of emulsion parameters on relaxation behaviors for immiscible polymer blends

Zhao Chen, Lin-Qiong Xu, Hanxiong Huang, 2014 .

Microcellular injection-compression molding (micm): A novel technology for effectively improving cellular structure of polystyrene foams

Wei-Sheng Guan, Hanxiong Huang, Tian Jiadong, 2014 .

Revealing toughening mechanism for alternating multilayered polypropylene/poly(ethylene-co-octene) sheets

Hanxiong Huang, Weiping Li, Hanxiong Huang, 2015 .

Mechanical and rheological properties of PP/SEBS/OMMT ternary composites

Hanxiong Huang, Fenghua Su, Hanxiong Huang, 2009 .

Preparing thermoplastic polyurethane/thermoplastic starch with high mechanical and biodegradable properties

Hanxiong Huang, Shuidong Zhang, L. Tan, 2015 .

Detecting blend morphology development during melt blending along an extruder

You-Fa Huang, Hanxiong Huang, Xiao-Jing Li, 2007 .

Poiseuille/squeeze flow‐induced crystallization in microinjection‐compression molded isotactic polypropylene

Wei-Sheng Guan, Hanxiong Huang, Bin Wang, 2013 .

Supercritical carbon dioxide-assisted reactive extrusion for preparation long-chain branching polypropylene and its rheology

Fenghua Su, Hanxiong Huang, 2011 .

Comparison of superimposed effects in high-shear-rate capillary rheology of polystyrene, polypropylene, and linear low-density polyethylene melts

Wei-Sheng Guan, Hanxiong Huang, An-Fu Chen, 2015 .

Online shear viscosity and microstructure of PP/nano-CaCO3 composites produced by different mixing types

G. Jiang, Hanxiong Huang, Hanxiong Huang, 2008, Journal of Materials Science.

Process‐induced phase and crystal morphologies in water‐assisted injection molded polypropylene/polymeric β‐nucleating agent blend parts

Zhi-Yong Wang, Bin Wang, Hanxiong Huang, 2015 .

Optimal design of heating system in rapid thermal cycling blow mold by a two-step method based on sequential quadratic programming

Han-Xiong Huang, Cheng-Long Xiao, Hanxiong Huang, 2018, International Communications in Heat and Mass Transfer.

Tuning cell structure and expansion ratio of thick-walled biodegradable poly(lactic acid) foams prepared using supercritical CO2

Lin-Qiong Xu, Hanxiong Huang, 2020, Journal of Cellular Plastics.

Crystal Morphology of Water-Assisted Injection Molded High-Density Polyethylene with Two Different Molecular Weights

Han Lu, Bin Wang, Hanxiong Huang, 2011 .

Development of a rapid thermal cycling molding with electric heating and water impingement cooling for injection molding applications

Hanxiong Huang, Cheng-Long Xiao, Hanxiong Huang, 2014 .

Generation of nanocellular TPU/reduced graphene oxide nanocomposite foams with high cell density by manipulating viscoelasticity

Shu-Ping Xiao, Hanxiong Huang, 2019, Polymer.

Balancing mechanical properties and processability for devulcanized ground tire rubber using industrially sized single‐screw extruder

Hanxiong Huang, Lv Xiaolong, Lv Baiyuan, 2016 .

Structural interpretations on tensile fracture mechanism and elongational rheology of poly(vinylidene fluoride)/halloysite nanotubes nanocomposites

Min Wu, Hanxiong Huang, Hanxiong Huang, 2018, Polymer Engineering & Science.

Finite Element and Neural Network Modeling of Viscoelastic Annular Extrusion

Yan-Sheng Miao, Hanxiong Huang, Hanxiong Huang, 2007 .

Numerical prediction and experimental validation of viscoelastic annular swell

Dong Li, Yan-Sheng Miao, Hanxiong Huang, 2006 .

MIGRATION OF NANOCLAY IN PP/PS BLEND AND EFFECT OF ITS LOCALIZATION ON CELL STRUCTURE

Junpeng Zhao, Hanxiong Huang, 2008 .

Superimposed Effects in High-Shear-Rate Capillary Rheology of Polystyrene Melt

Wei-Sheng Guan, Hanxiong Huang, Hanxiong Huang, 2013 .

Microstructure and on-line shear viscosity of PP/nano-CaCO3 composites prepared by twin-screw extruder

Hanxiong Huang, G. Jiang, S. Mao, 2006 .

Relaxation behavior of poly(lactic acid)/poly(butylene succinate) blend and a new method for calculating its interfacial tension

Hanxiong Huang, Lin-Qiong Xu, Hanxiong Huang, 2012 .

Carbide-bonded graphene coated zirconia for achieving rapid thermal cycling under low input voltage and power

L. J. Lee, Junjie Pan, Hao Yang, 2019 .

Multiobjective optimization design of heating system in electric heating rapid thermal cycling mold for yielding high gloss parts

Cheng-Long Xiao, Hanxiong Huang, Hanxiong Huang, 2014 .

Optimal design of heating system for rapid thermal cycling mold using particle swarm optimization and finite element method

Han-Xiong Huang, Cheng-Long Xiao, Cheng-Long Xiao, 2014 .

In situ vitamin C reduction of graphene oxide for preparing flexible TPU nanocomposites with high dielectric permittivity and low dielectric loss

Hanxiong Huang, Shu-Ping Xiao, Hanxiong Huang, 2018 .

Incorporation of halloysite nanotubes into PVDF matrix: Nucleation of electroactive phase accompany with significant reinforcement and dimensional stability improvement

Bin Wang, Hanxiong Huang, Hanxiong Huang, 2014 .

Fracture behavior and optical properties of melt compounded semi-transparent polycarbonate (PC)/alumina nanocomposites

L. Turng, A. Chandra, Hanxiong Huang, 2011 .

Influence of super-hydrophobic silicone rubber substrate on the growth and differentiation of human lens epithelial cells

Wei-Sheng Guan, D. Zheng, Q. Gao, 2018, Journal of Materials Science: Materials in Medicine.

Rapid transfer of hierarchical microstructures onto biomimetic polymer surfaces with gradually tunable water adhesion from slippery to sticky superhydrophobicity

An-Fu Chen, Hanxiong Huang, Hanxiong Huang, 2016 .

Back melt flow in injection–compression molding: Effect on part thickness distribution

Wei-Sheng Guan, Hanxiong Huang, 2012 .