Fei Dong

发表

A dislocation density-based model considering dynamic strain aging for annealed and water-quenched aluminum alloys under low-temperature conditions

You-ping Yi, Shi-quan Huang, Fei Dong, 2022, Materials Science and Engineering: A.

Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation

You-ping Yi, Shi-quan Huang, Hailin He, 2021, Materials Characterization.

Refinement of second-phase particles and grain structures of 2219 Al Cu alloy forgings using an improved thermomechanical treatment process

You-ping Yi, Shi-quan Huang, Hailin He, 2021 .

Hot Deformation Behavior and Microstructural Evolution of the Al-Cu-Li alloy: A Study With Processing Map

You-ping Yi, Shi-quan Huang, Hailin He, 2022, Journal of Alloys and Compounds.

Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation

You-ping Yi, Shi-quan Huang, Hailin He, 2021, Materials Science and Engineering: A.

Effects of Cryogenic Deformation on Second-Phase Al2Cu Particles and Mechanical Properties of 2219 Al–Cu Alloy Rings

You-ping Yi, Shi-quan Huang, Hailin He, 2019, Metals and Materials International.

Cryogenic formability and deformation behavior of 2060 Al–Li alloys with water-quenched and T4 aged temper

Bin Wang, Kenny Huang, You-ping Yi, 2021, Materials Science and Engineering: A.

Effect of increased stretching deformation at cryogenic temperature on the precipitation behavior and mechanical properties of 2060 Al–Li alloy

You-ping Yi, Shi-quan Huang, Hailin He, 2021, Materials Science and Engineering: A.

Flow behaviors and deformation mechanism of WQ-tempered Al–Li alloy at cryogenic temperatures

You-ping Yi, Shi-quan Huang, Hailin He, 2021 .

Experimental and Theoretical Investigation on the Forming Limit of 2024-O Aluminum Alloy Sheet at Cryogenic Temperatures

You-ping Yi, Shi-quan Huang, Hailin He, 2021, Metals and Materials International.

Effects of Deformation at High, Medium, and Cryogenic Temperatures on the Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys

You-ping Yi, Shi-quan Huang, Hailin He, 2022, Materials.

Comparative study on the formability and microstructure evolution of different tempered Al–Cu–Li alloy sheets during room and cryogenic temperature forming process

You-ping Yi, Shi-quan Huang, Kejie Huang, 2023, Journal of Materials Research and Technology.

Measuring internal residual stress in Al-Cu alloy forgings by crack compliance method with optimized parameters

You-ping Yi, Shi-quan Huang, Fei Dong, 2020, Journal of Central South University.

Study on Quench Sensitivity and Premature Precipitation Behavior of the Cryogenic Deformed 6061 Aluminum Alloy

You-ping Yi, Shi-quan Huang, Hailin He, 2023, Metals and Materials International.