Pengfei Gao

发表

Research on hot deformation, dynamic recrystallization and numerical simulation of Fe–28Mn–10Al–1.5C–0.6V steel

Zhengzhi Zhao, Peng Wan, Pengfei Gao, 2022, Journal of Materials Science.

Dynamic recrystallization behavior and microstructure evolution of low-density high-strength Fe–Mn–Al–C steel

Zhengzhi Zhao, Feng Li, Peng Wan, 2021 .

Effect of vanadium on hydrogen embrittlement susceptibility of high-strength hot-stamped steel

Wei-jian Chen, Zheng-zhi Zhao, Shuai Wang, 2021, Journal of Iron and Steel Research International.

Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel

Wei-jian Chen, Gao Pengfei, Peng-fei Gao, 2020 .

A Cu-Al2O3 Composite with Ultrahigh Tensile Strength Prepared by High-Pressure Torsion

J. Du, Yuxing He, D. Shen, 2022, Journal of Materials Engineering and Performance.

Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-high-strength Q&P steel

Wei-jian Chen, Feng Li, Zheng-zhi Zhao, 2021, Journal of Iron and Steel Research International.

Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process

Zhengzhi Zhao, Wei-jian Chen, Feng Li, 2020, Acta Metallurgica Sinica (English Letters).

Enhanced strength–ductility synergy of multiphase steels via regulation of austenite decomposition during annealing

Zhengzhi Zhao, Jinhai Liu, Pengfei Gao, 2023, Journal of Materials Science.

Effect of Cr and isothermal holding temperature on microstructure and properties of complex phase steel with high formability (CH steel)

Wei-jian Chen, Feng Li, Zheng-zhi Zhao, 2022, Journal of Iron and Steel Research International.

Quasi-Situ Characterization of Retained Austenite Orientation in Quenching and Partitioning Steel via Uniaxial Tensile Tests

Jie Liu, Zhengzhi Zhao, Wei-jian Chen, 2020, Materials.

Regulation of the microstructure and mechanical properties of 1300 MPa high-Mn transformation-induced plasticity steel using Mn segregation and reversion annealing

Zhengzhi Zhao, Xueliang Shang, Wei-jian Chen, 2022, Applied Physics A.

Influence of the Hydrogen Doping Method on the Atomic Structure, Mechanical Properties and Relaxation Behaviors of Metallic Glasses

Weixu Zhang, Jiacheng Zhang, Pengfei Gao, 2023, Materials.

Literature Review on the Fatigue Properties of Materials Processed by Surface Mechanical Attrition Treatment (SMAT)

Zhidan Sun, D. Retraint, Pengfei Gao, 2022, Metals.

Hot Deformation Behaviors and Process Parameters Optimization of Low-Density High-Strength Fe–Mn–Al–C Alloy Steel

Zhengzhi Zhao, Feng Li, Peng Wan, 2022, Metals and Materials International.

In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation

Zhengzhi Zhao, Xueliang Shang, Wei-jian Chen, 2022, Materials Science and Engineering: A.

Interaction between Dislocations, Precipitates and Hydrogen Atoms in a 2000 MPa Grade Hot-Stamped Steel

S. Kuang, Wei-jian Chen, Zheng-zhi Zhao, 2021, SSRN Electronic Journal.

Influence of porosity on mechanical and corrosion properties of SLM 316L stainless steel

Zhengzhi Zhao, D. Yang, X. Kan, 2021, Applied Physics A.

Effect of Nano-Ti Particles on Microstructure and Mechanical Properties of Mg-3Al-1Zn Matrix Composites

K. Zheng, Xiaohong Chen, Fuwei Zhang, 2023, Materials.