M. Kang

发表

Characteristics of alternate supply of shielding gases in aluminumGMA welding

Prasad K. Yarlagadda, Ill-Soo Kim, Bong-Yong Kang, 2009 .

Joining of Steel to Aluminum Alloy by AC Pulse MIG Welding

Sehun Rhee, Dong Cheol Kim, Dong Cheol Kim, 2009 .

Advancements in pulse gas metal arc welding

Prasad K. Yarlagadda, Mun-Jin Kang, Praveen Posinasetti, 2005 .

Resistance spot weldability of lightweight steel with a high Al content

Dongcheol Kim, I. Hwang, Young-Min Kim, 2017, Metals and Materials International.

Effects of post-weld heat treatment on mechanical properties and microstructure of resistance spot–welded lightweight steel

S. Nam, Heewon Cho, I. Hwang, 2019, The International Journal of Advanced Manufacturing Technology.

Effects of post-weld heat treatment on mechanical properties and microstructure of resistance spot–welded lightweight steel

Heewon Cho, S. Nam, I. Hwang, 2019, The International Journal of Advanced Manufacturing Technology.

Study on the Optimization of Pulse GTAW Process for Diaphragm with Thin Thickness

In-Sung Hwang, Mun-Jin Kang, Sehun Rhee, 2008 .

Drop transfer mode prediction in pulse GMAW of aluminum using statistical model

Prasad K. Yarlagadda, Mun-Jin Kang, Praveen Posinasetti, 2008 .

Behaviour Of Metal Transfer Modes In Pulse Gas Metal Arc Welding Of Aluminum

P. Yarlagadda, M. Kang, P. Posinasetti, 2006 .

Arc voltage behavior in GMAW-P under different drop transfer modes

Prasad K. Yarlagadda, P. Praveen, Mun-Jin Kang, 2009 .

Arc Voltage Behaviour of One Drop Per Pulse Mode in GMAW-P

Prasad K. Yarlagadda, Mun-Jin Kang, Praveen Posinasetti, 2006 .

Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates

T. Jun, Jin-young Yoon, G. Han, 2021 .

Prediction of Resistance Spot Weld Quality of 780 MPa Grade Steel Using Adaptive Resonance Theory Artificial Neural Networks

Jin-Young Yoon, Mun-Jin Kang, Dong-Cheol Kim, 2018, Metals.

Study on the welding technology of a pleated type metallic filter using micropulse gas tungsten arc welding

Sehun Rhee, Mun Jin Kang, Hyoung Jin Park, 2009 .

Laser welding of Al-Si coated hot stamping steel

Cheolhee Kim, Yeong-Do Park, Munjin Kang, 2011 .

Weld quality improvement and porosity reduction mechanism of zinc coated steel using tandem gas metal arc welding (GMAW)

Jedo Kim, D. Kam, T. Lee, 2021 .

Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel

J. Oh, S. Nam, Heewon Cho, 2019, Metals.

Effect of Weld Bead Shape on the Fatigue Behavior of GMAW Lap Fillet Joint in GA 590 MPa Steel Sheets

Dongcheol Kim, I. Hwang, Dong-Yoon Kim, 2017 .

Improvement of fatigue strength of lap fillet joints by using tandem MAG welding in a 590-MPa-grade galvannealed steel sheet

Munjin Kang, Dongcheol Kim, Dong-Yoon Kim, 2017 .

Real-Time Weld Quality Prediction Using a Laser Vision Sensor in a Lap Fillet Joint during Gas Metal Arc Welding

Insung Hwang, Jiyoung Yu, Huijun Lee, 2020, Sensors.

Effects of Winding Position and Air Time on Diffusible Hydrogen Content in Weld Metal using Flux Cored Wire

Dongcheol Kim, I. Hwang, Young-Min Kim, 2020 .

The arc phenomenon by the characteristic of EN ratio in AC pulse GMAW

Dong Cheol Kim, S. Rhee, M. Kang, 2013 .

Principle and Characteristics of AC Pulse MIG Welding

Dongcheol Kim, M. Kang, H. Park, 2008 .

Study of the Constant Current Fuzzy Control System Design using CRS Algorithm during Inverter DC Resistance Spot Welding Process

Jiyoung Yu, Sehun Rhee, Mun Jin Kang, 2010 .

Real time estimation of CO2 laser weld quality for automotive industry

Young Whan Park, Mun-Jin Kang, Sehun Rhee, 2002 .

A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application

Mun-Jin Kang, Cheolhee Kim, Cheolhee Kim, 2010 .

A Study on Distributions of Electromagnetic Force of the Dissimilar Metal Joining in MPW Using a FEM

Dong-Hwan Park, Ill-Soo Kim, Ji-Yeon Shim, 2009 .

The arc phenomenon by the characteristic of EN ratio in AC pulse GMAW

Dong Cheol Kim, S. Rhee, M. Kang, 2012, The International Journal of Advanced Manufacturing Technology.

Weld-Quality Prediction Algorithm Based on Multiple Models Using Process Signals in Resistance Spot Welding

Jiyoung Yu, Dong-Yoon Kim, Munjin Kang, 2021, Metals.

Optimization of Welding Parameters in Resistance Spot Welding of 980 MPa Grade GA Steel Sheet using Multi-Response Surface Methodology

S. Hyun, I. Hwang, Young-Min Kim, 2018, Journal of Welding and Joining.

A Study on the Optimization for a V-groove GMA Welding Process Using a Dual Response Method

Mun-Jin Kang, Sehun Rhee, Seung-Ho Ahn, 2008 .

Effect of Porosity on the Fatigue Behavior of Gas Metal Arc Welding Lap Fillet Joint in GA 590 MPa Steel Sheets

Dongcheol Kim, Jong-dock Seo, I. Hwang, 2018 .

Effect of Welding Time on Resistance Spot Weldability of Aluminum 5052 Alloy

Dongcheol Kim, Munjin Kang, I. Hwang, 2018, Metals and Materials International.

Optimisation of the wire feed rate during pulse MIG welding of Al sheets

Mun-Jin Kang, Sehun Rhee, S. Rhee, 2008 .

Optimization of arc-start performance by wire-feeding control for GMA welding

Young Whan Park, Sehun Rhee, Jong Gu Kang, 2013 .

Optimization of arc-start performance by wire-feeding control for GMA welding

Young Whan Park, Dong Cheol Kim, S. Rhee, 2013, Journal of Mechanical Science and Technology.

Gas metal arc weldability of 1.5 GPa grade martensitic steels

Dongcheol Kim, I. Hwang, Young-Min Kim, 2018, Metals and Materials International.

Mechanical Behavior of Weldbond Joint of 1.2GPa Grade Ultra High Strength TRIP Steel for Car Body Applications

Junghwan Bang, Jun-Ki Kim, Mok-Soon Kim, 2014 .