Yusuf Kaynak

发表

Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining

Yusuf Kaynak, Y. Kaynak, 2014 .

Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes

Yusuf Kaynak, Mustafa Kurt, Eyup Bagci, 2009 .

Static, dynamic and fatigue analysis of a semi-automaticgun locking block

Mustafa Kurt, Yusuf Kaynak, Bülent Ekici, 2009 .

Sustainability assessment of in-house developed environment-friendly hybrid techniques for turning Ti-6Al-4V

Munish Kumar Gupta, Chetan Agrawal, Yusuf Kaynak, 2020 .

Progress Toward Modeling and Optimization of Sustainable Machining Processes

I. S. Jawahir, A. K. Balaji, Yusuf Kaynak, 2020 .

Multi objective optimization of rough pocket milling strategies during machining of lead-free brass alloys using Desirability function and Genetic algorithms-based analysis

Yusuf Kaynak, Nima Zoghipour, Akif Furkan Yaratan, 2021 .

Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material

I. S. Jawahir, Yusuf Kaynak, I. Jawahir, 2016 .

Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining

I. S. Jawahir, Tao Lu, Yusuf Kaynak, 2014 .

Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining

I. S. Jawahir, Haluk E. Karaca, Yusuf Kaynak, 2014, Journal of Materials Engineering and Performance.

Evaluation of drilled hole quality in Al 2024 alloy

Yusuf Kaynak, Mustafa Kurt, Eyup Bagci, 2008 .

Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products

Yusuf Kaynak, Mustafa Kurt, Gurcan Atakok, 2009 .

Surface Integrity Characteristics of NiTi Shape Memory Alloys Resulting from Dry and Cryogenic Machining

I. S. Jawahir, Haluk E. Karaca, Yusuf Kaynak, 2014 .

An experimental analysis of minimum chip thickness in micro-milling of two different titanium alloys

Fevzi Bedir, Yusuf Kaynak, Kubilay Aslantas, 2020 .

Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions

I. S. Jawahir, Haluk E. Karaca, Yusuf Kaynak, 2015 .

Dimensional analyses and surface quality of the laser cutting process for engineering plastics

Yusuf Kaynak, Mustafa Kurt, Eyup Bagci, 2009 .

The Effect of Active Phase of the Work Material on Machining Performance of a NiTi Shape Memory Alloy

I. S. Jawahir, Haluk E. Karaca, Ronald D. Noebe, 2015, Metallurgical and Materials Transactions A.

Influence of molding conditions on the shrinkage and roundness of injection molded parts

Yusuf Kaynak, Mustafa Kurt, Bilcen Mutlu, 2010 .

Cryogenic Machining of Hard-To-Machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining

I. S. Jawahir, Domenico Umbrello, Yusuf Kaynak, 2012 .

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-based Burnishing Model☆

I. S. Jawahir, Yusuf Kaynak, I. Jawahir, 2015 .

Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: the influence of cryogenic, MQL, and high pressure coolant supply

Yusuf Kaynak, Y. Kaynak, A. Gharibi, 2018 .

The Impact of Novel Material Processing Methods on Component Quality, Life and Performance

I. S. Jawahir, Tao Lu, Yusuf Kaynak, 2014 .

Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys☆

I. S. Jawahir, Haluk E. Karaca, Ronald D. Noebe, 2013 .