Patricio A. Ravetta

发表

A Comparative Study of Simulated and Measured Main Landing Gear Noise for Large Civil Transports

Mehdi R. Khorrami, Ehab Fares, Benedikt Konig, 2017 .

Acoustic Measurements of a Large Civil Transport Main Landing Gear Model

Ricardo A. Burdisso, Mehdi R. Khorrami, Patricio A. Ravetta, 2016 .

Screening of Potential Noise Control Devices at Virginia Tech for QTD II Flight Test

Ricardo A. Burdisso, Wing Ng, Mehdi R. Khorrami, 2007 .

Assessment of Airframe Noise Reduction Technologies based on EPNL from Flight Tests

Mehdi R. Khorrami, Thomas Van de Ven, Patricio A. Ravetta, 2019, 25th AIAA/CEAS Aeroacoustics Conference.

Flight-Test Evaluation of Landing Gear Noise Reduction Technologies

William M. Humphreys, Mehdi R. Khorrami, David P. Lockard, 2019 .

LORE Approach for Phased Array Measurements and Noise Control of Landing Gears

Patricio A. Ravetta, 2005 .

Development and Calibration of a Field-Deployable Microphone Phased Array for Propulsion and Airframe Noise Flyover Measurements

William M. Humphreys, Mehdi R. Khorrami, David P. Lockard, 2016 .

Feasibility Study Of Microphone Phased Array Based Machinery Health Monitoring

Ricardo A. Burdisso, Patricio A. Ravetta, Jorge Muract, 2007 .

Wind Tunnel Aeroacoustic Measurements of a 26%-scale 777 Main Landing Gear

Ricardo A. Burdisso, Wing Ng, Patricio A. Ravetta, 2004 .

Noise Reduction of a Model-Scale Landing Gear Measured in the Virginia Tech Aeroacoustic Wind Tunnel

Hugo E. Camargo, Ricardo A. Burdisso, Wing Ng, 2008 .

Flight-Test Evaluation of Airframe Noise Mitigation Technologies

William M. Humphreys, Mehdi R. Khorrami, David P. Lockard, 2018, 2018 AIAA/CEAS Aeroacoustics Conference.

Screening of Potential Landing Gear Noise Control Devices at Virginia Tech For QTD II Flight Test

Ricardo A. Burdisso, Mehdi R. Khorrami, Patricio A. Ravetta, 2007 .

Aeroacoustic Evaluation of Flap and Landing Gear Noise Reduction Concepts

William M. Humphreys, Mehdi R. Khorrami, David P. Lockard, 2014 .

Analysis of Simulated and Experimental Noise Sources of Boeing 777 Main Gear Model via CLEAN in 3D

Mehdi R. Khorrami, Ehab Fares, Benedikt Konig, 2018 .

Phased Array Technology Development At Virginia Tech: Application To Landing Gear Noise Source Identification

Ricardo A. Burdisso, Wing Ng, Patricio A. Ravetta, 2004 .

A Comparison of Beamforming Processing Techniques for Low Frequency Noise Source Identification in Mining Equipment

Hugo E. Camargo, Ricardo A. Burdisso, Patricio A. Ravetta, 2009 .

Correction: Analysis of Simulated and Experimental Noise Sources of Boeing 777 Main Gear Model via CLEAN in 3D

Mehdi R. Khorrami, Ehab Fares, Benedikt Konig, 2018, 2018 AIAA/CEAS Aeroacoustics Conference.

The Kevlar-walled anechoic wind tunnel

Ricardo A. Burdisso, Kenneth A. Brown, Aurelien Borgoltz, 2013 .

Noise source identification on a horizontal vibrating screen

Hugo E. Camargo, David Yantek, Patricio A. Ravetta, 2009 .

Aerodynamic Measurements of the 777 Main Landing Gear Model

Ricardo A. Burdisso, Patricio A. Ravetta, Aditya K. Ringshia, 2006 .

Novel Kevlar-Walled Wind Tunnel for Aeroacoustic Testing of a Landing Gear

Hugo E. Camargo, Ricardo A. Burdisso, Wing Ng, 2008 .

Application of Phased Array Technology for Identification of Low Frequency Noise Sources

Hugo E. Camargo, Ricardo A. Burdisso, Patricio A. Ravetta, 2009 .

Noise Control of Landing Gears Using Elastic Membrane-Based Fairings

Ricardo A. Burdisso, Wing Ng, Patricio A. Ravetta, 2007 .

Machinery Health Monitoring Using Acoustic Phased Arrays: An Experimental Demonstration

Ricardo A. Burdisso, Patricio A. Ravetta, Kyle Schwartz, 2009 .

Dynamic Stability Analysis Of Isolated Integrated Motor Propulsor.

Ricardo A. Burdisso, Sergio Preidikman, Patricio A. Ravetta, 2007 .

Airframe Noise Simulations of a Full-Scale Large Civil Transport in Landing Configuration

Mehdi R. Khorrami, Ehab Fares, Benedikt Konig, 2021, AIAA AVIATION 2021 FORUM.

Multiplanar Synthetic Arrays and Their Application to Full-Scale Landing Gear Noise Source Identification

Mehdi R. Khorrami, Ehab Fares, Benedikt Konig, 2021, AIAA AVIATION 2021 FORUM.

Aeroacoustic Computations of a Generic Low Boom Concept in Landing Configuration: Part 3 - Aerodynamic Validation and Noise Source Identification

Mehdi R. Khorrami, Patrick Shea, Courtney S. Winski, 2021, AIAA AVIATION 2021 FORUM.

Noise Source Localization and Optimization of Phased-Array Results

Patricio A. Ravetta, R. Burdisso, W. Ng, 2006 .

Aerodynamic and Acoustic Corrections for a Kevlar-Walled Anechoic Wind Tunnel

Ricardo A. Burdisso, Aurelien Borgoltz, William J. Devenport, 2010 .

Comparison of Measured and Simulated Acoustic Signatures for a Full-Scale Aircraft with and without Airframe Noise Abatement

Patricio A. Ravetta, Ryan J. Ferris, D. Lockard, 2018, 2018 AIAA/CEAS Aeroacoustics Conference.

Lessons Learned on the Use of Data Surfaces for Ffowcs Williams-Hawkings Calculations: Airframe Noise Applications

Patricio A. Ravetta, Ryan J. Ferris, M. Khorrami, 2022, 28th AIAA/CEAS Aeroacoustics 2022 Conference.

Measured and Simulated Acoustic Signature of a Full-Scale Aircraft with Airframe Noise Reduction Technology Installed

Patricio A. Ravetta, Ryan J. Ferris, D. Lockard, 2019, 25th AIAA/CEAS Aeroacoustics Conference.