Francesco Caputo

发表

Finite Element Dynamic Analysis of a Railway Seat Under Longitudinal Impact Condition

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2011 .

Global-Local FE Simulation of a Plate LVI Test

Francesco Caputo, Giuseppe Lamanna, A. De Luca, 2013 .

A Strategy for a Robust Design of Cracked Stiffened Panels

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2013 .

Numerical Simulation of a Stretch Bending Process

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2009 .

Drop test simulation and validation of a full composite fuselage section of a regional aircraft

Francesco Caputo, Debora Di Caprio, A. De Luca, 2018 .

Residual Strength Improvement of an Aluminium Alloy Cracked Panel

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2013 .

Simulating the Response of Structures to Impulse Loadings

Francesco Caputo, Alessandro Soprano, 2011 .

Evaluation of energy release rate for delamination defects at the skin/stringer interface of a stiffened composite panel

Francesco Caputo, R. Esposito, Enrico Armentani, 2004 .

Methodological Approaches for Kinematic Coupling of non-matching Finite Element meshes

Francesco Caputo, Rosario Borrelli, A. Sellittoa, 2011 .

FEM Simulation of a FML Full Scale Aeronautic Panel Undergoing Static Load

Francesco Caputo, Roberto Guglielmo Citarella, Enrico Armentani, 2014 .

Stochastic Improvement of the Residual Strength of a Stiffened Panel

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2007 .

Modelling of interactions between Barely Visible Impact Damages and Lamb waves in CFRP laminates.

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2018 .

Numerical Characterization and Validation of Vehicle Collisions

Francesco Caputo, Alessandro Soprano, Alfonso Grimaldi, 2008 .

A Methodological Approach to the Tolerance Problems during the Assembly Process of Deformable Bodies

Francesco Caputo, Giuseppe Lamanna, F. M. Pannullo, 2011 .

About the Effects of Residual Stress States Coming from Manufacturing Processes on the Behaviour of Riveted Joints

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2008 .

More safe and less expensive design strategies in the composite A/C certification process: numerical-experimental crashworthiness evaluation for composite regional aircraft fuselage

Francesco Caputo, L. Di Palma, L. Gramiccia, 2016 .

Maintenance Scheduling in Risk Assessment Procedures

Francesco Caputo, Alessandro Soprano, 2006 .

Multibody Evaluation of Interactions between the Coaches of a Train during an Impact

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2010 .

A robust approach for the determination of Gurson model parameters

Francesco Caputo, Giuseppe Lamanna, Raffaele Sepe, 2016 .

Numerical solution techniques for structural instability problems

Francesco Caputo, G. Cricrì, Enrico Armentani, 2006 .

A Numerical Investigation about the Effects of the Riveting Operation on the Strength of Joints

Francesco Caputo, Alessandro Soprano, Alfonso Grimaldi, 2007 .

A sensitivity analysis on the damage detection capability of a Lamb waves based SHM system for a composite winglet

Francesco Caputo, Donato Perfetto, A. De Luca, 2018 .

A review on analytical failure criteria for composite materials

Francesco Caputo, Alessandro De Luca, F. Caputo, 2017 .

Parametric simulation of LVI test onto CFRP plates

Francesco Caputo, A. De Luca, Valentina Lopresto, 2016 .

A Risk Analysis Procedure for Aeronautical Components

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2004 .

Squeal Frequency of a Railway Disc Brake Evaluation by FE Analyses

Francesco Caputo, A. De Luca, F. Cascetta, 2018 .

Damage Propagation in Composite Structures using an Embedded Global-Local Approach

Francesco Caputo, Aniello Riccio, Mauro Zarrelli, 2013 .

Application to plate components of a kinematic global‐local approach for non‐matching finite element meshes

Francesco Caputo, Rosario Borrelli, Aniello Riccio, 2012 .

Numerical simulation of LVI test onto composite plates

Francesco Caputo, Valentina Lopresto, Alessandro De Luca, 2014 .

Multibody Investigation on the Passive Safety Performances of Seats in Railway Vehicles

Francesco Caputo, Giuseppe Lamanna, Francesco Fidanza, 2010 .

On the evaluation of the overloads coming from the use of seat-belts on a passenger railway seat

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2012 .

3D Global-Local Analysis Using Mesh Superposition Method

T. Ludwig, Francesco Caputo, Rosario Borrelli, 2013 .

Stochastic Improvement of Structural Design

Francesco Caputo, Alessandro Soprano, 2010 .

Elliptical Triangulation Method for Damage Identification on a Complex Aeronautical Structure

Francesco Caputo, Angelo De Fenza, Alessandro De Luca, 2019 .

Fatigue Behaviour of Full Scale Flat Stiffened Aeronautic Panels

Francesco Caputo, Giuseppe Lamanna, Enrico Armentani, 2014 .

Energy Absorption Capabilities of a Square Tube System

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2011 .

Additive Manufacturing Re-designs the Industry

Ciro Scognamiglio, Francesco Caputo, Rosario Borrelli, 2021, AHFE.

Application of the Mesh Superposition Technique to the Study of Delaminations in Composites Thin Plates

Francesco Caputo, Rosario Borrelli, Aniello Riccio, 2012 .

Low velocity impact response of carbon fiber laminates fabricated by pulsed infusion: A review of damage investigation and semi-empirical models validation

Pietro Ferraro, Francesco Caputo, Valentina Lopresto, 2016 .

Numerical evaluation of structural relaxation-induced stresses in amorphous polymers

Francesco Caputo, Luigi Grassia, Alberto D'Amore, 2006 .

Fem Sensitivity Analyses on the Stress Levels in a Human Mandible with a Varying ATM Modelling Complexity

Francesco Caputo, Roberto Guglielmo Citarella, Enrico Armentani, 2010 .

Development of a multibody system for crashworthiness certification of aircraft seat

Francesco Caputo, Francesco Marulo, A. De Luca, 2018 .

On the evaluation of the plastic zone size at the crack tip

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2013 .

FE Simulation of a SHM System for a Large Radio-Telescope

Francesco Caputo, Alessandro De Luca, A. Greco, 2018 .

Numerical Investigation on LEFM Limits under LSY Conditions

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2013 .

On the use of global–local kinematic coupling approaches for delamination growth simulation in stiffened composite panels

Francesco Caputo, Rosario Borrelli, Aniello Riccio, 2015 .

Numerical investigation of onset and evolution of LVI damages in Carbon–Epoxy plates

Francesco Caputo, Giuseppe Lamanna, Valentina Lopresto, 2015 .

On the Tensile Behaviour of CF and CFRP Materials under High Strain Rates

Francesco Caputo, Giuseppe Lamanna, M. Ignarra, 2017 .

Plastic Zone Size as EPFM Parameter

Francesco Caputo, Alessandro Soprano, Enrico Armentani, 2003 .

Damage characterization of composite plates under low velocity impact using ultrasonic guided waves

Francesco Caputo, M. H. Aliabadi, Z. Sharif Khodaei, 2018 .

Impact behaviour of omega stiffened composite panels

Francesco Caputo, Valentina Lopresto, Aniello Riccio, 2016 .

Numerical Evaluation and Experimental Comparison of Elasto-plastic Stress-strain Distribution Around the Corner Cracks of a Notched Specimen

Francesco Caputo, Giuseppe Lamanna, Enrico Armentani, 2015 .

FEM and BEM Analysis of a Human Mandible with Added Temporomandibular Joints

Alessandro Naddeo, Francesco Caputo, Roberto Guglielmo Citarella, 2012 .

Numerical Procedures for Damage Mechanisms Analysis in CFRP Composites

Francesco Caputo, Giuseppe Lamanna, Aniello Riccio, 2013 .

An Analytical Formulation for the Plastic Deformation at the Tip of Short Cracks

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2011 .

Numerical and experimental investigation of residual strength of a LVI damaged CFRP omega stiffened panel with a cut-out

Francesco Caputo, Giuseppe Lamanna, R. Sepe, 2016 .

Modelling the simulation of impact induced damage onset and evolution in composites

Francesco Caputo, Aniello Riccio, G. Di Felice, 2014 .

Kinematic Approach for a Global-Local Coupling: Compressive Behaviour of a Delaminated Panel:

Francesco Caputo, Rosario Borrelli, Aniello Riccio, 2011 .

Evaluation of the Mechanical Behavior of a Biocomposite Material in a Fuselage Section Numerical Drop Test

Francesco Caputo, Giuseppe Lamanna, Donato Perfetto, 2020 .

VRTest : a Virtual Reality sysTEm for tranSporTation Design VRTest : a Virtual Reality sysTEm for tranSporTation design

Francesco Caputo, Giuseppe Di Gironimo, 2007 .

Handling of composite-metal interface in a hybrid mechanical coupling

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2012 .

Effects of Tolerances on the Structural Behavior of a Bolted Hybrid Joint

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2011 .

Evaluation by FEM of the Influence of the Preheating and Post-Heating Treatments on Residual Stresses in Welding

Francesco Caputo, Giuseppe Lamanna, Enrico Armentani, 2014 .

Numerical study of the structural behaviour of impacted composite laminates subjected to compression load

A. De Luca, Francesco Caputo, R. Sepe, 2015 .

Geometrical Parameters Influencing a Hybrid Mechanical Coupling

Francesco Caputo, Giuseppe Lamanna, Alessandro Soprano, 2012 .

Intra-laminar Damage Evolution in a Composite Grid Structure Representative Volume Element under Compression Load

Francesco Caputo, Aniello Riccio, N. Tessitore, 2013 .

Buckling and post buckling analyses of a GLARE thick flat side panel – Proc. Of ETCE/OMAE2000 Joint Conference: Energy for the New Millenium, New Orleans, Feb. 2000

Francesco Caputo, A. Apicella, Enrico Armentani, 2000 .

Fem Sensitivity Analyses on the Stress Levels in a Human Mandible with a Varying ATM Modelling Complexity~!2009-02-09~!2010-01-15~!2010-04-01~!

Francesco Caputo, Roberto Guglielmo Citarella, Enrico Armentani, 2010 .