Mitsuhiro Murayama

发表

Comparison Study of Drag Prediction for the 4th CFD Drag Prediction Workshop using Structured and Unstructured Mesh Methods

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2010 .

TAS Code, FaSTAR and Cflow Results for the Sixth Drag Prediction Workshop

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017 .

PIV Investigation of Nacelle Chine Effects on High-Lift System Performance

Mitsuhiro Murayama, Takeshi Ito, Yuzuru Yokokawa, 2008 .

Flow simulation of flapping wings of an insect using overset unstructured grid

Yasushi Ito, Mitsuhiro Murayama, Fumiya Togashi, 2001 .

Comparison Study of RANS CFD Simulations for Subsonic Civil Aircraft Configurations

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2011 .

Comparison Study of Drag Prediction for the 3rd CFD Drag Prediction Workshop by Structured and Unstructured Mesh Method (Invited)

Kazuomi Yamamoto, Mitsuhiro Murayama, M. Murayama, 2007 .

Nacelle Chine Installation Based on Wind-Tunnel Test Using Efficient Global Optimization

Kazuomi Yamamoto, Mitsuhiro Murayama, Takeshi Ito, 2008 .

Evaluation of Computations and Transition Prediction Method for Aircraft High-Lift Configuration

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2009 .

Comparison Study of Drag Prediction by Structured and Unstructured Mesh Method

Kazuomi Yamamoto, Mitsuhiro Murayama, M. Murayama, 2008 .

Numerical Simulation of a Two-Wheel Main Landing Gear with Low-Noise Fairings around Tire-Axle Region

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2012 .

Flap -edge Flowfield and Noise in Civil Transport Aircraft Model

Kazuhiro Nakahashi, Mitsuhiro Murayama, Yuzuru Yokokawa, 2007 .

Estimation model of training support system for Finite Element Analysis and implementation of training scenario as knowledge patterns

Shigeru Nagasawa, Mitsuhiro Murayama, Yusuke Munakata, 2003 .

Implementation and Estimation of Design Pattern for FEM Training Support System

Shigeru Nagasawa, Mitsuhiro Murayama, Yusuke Munakata, 2002 .

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series

Edward N. Tinoco, Olaf Brodersen, John C. Vassberg, 2008 .

Summary of the Fourth AIAA CFD Drag Prediction Workshop

Edward N. Tinoco, Olaf Brodersen, John C. Vassberg, 2010 .

Experimental Study of Slat Noise from 30P30N Three-Element High-Lift Airfoil in JAXA Hard-Wall Low-Speed Wind Tunnel

Kazuomi Yamamoto, Mitsuhiro Murayama, Yasushi Ito, 2014 .

Slat Noise Simulation on Unstructured Grid with Reduced Dissipation Approach

Ryotaro Sakai, Yasushi Ito, Kazuomi Yamamoto, 2019, Advanced Courses.

Deformation Analysis of Quenched Center Bevel Blade Subjected to Pushing Load

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2006 .

Computational Efforts in Designing Experiment for High-lift Aeroacoustics

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2013 .

Numerical Simulation of Half-Span Aircraft Model with High-Lift Devices in Wind Tunnel

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2008 .

Aerodynamics of High-Lift Configuration Civil Aircraft Model in JAXA

Kazuomi Yamamoto, Mitsuhiro Murayama, Takeshi Ito, 2007 .

Simulation of Aircraft Response to Control Surface Deflection Using Unstructured Dynamic Grids

Takuma Kato, Kazuhiro Nakahashi, Mitsuhiro Murayama, 2002 .

Computational Studies of the NASA High-Lift Trap Wing Using Structured and Unstructured Grid Solvers

Yasushi Ito, Kazuomi Yamamoto, Kentaro Tanaka, 2012 .

Summary of Data from the Fifth Computational Fluid Dynamics Drag Prediction Workshop

Edward N. Tinoco, Olaf Brodersen, Kelly R. Laflin, 2014 .

Japan Aerospace Exploration Agency Studies for the Second High-Lift Prediction Workshop

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2015 .

Airframe Noise Generation from High-lift Trailing-edge Flap and Landing Gear( Generation and propagation of sounds in practical environments)

Kazuomi Yamamoto, Mitsuhiro Murayama, 2014 .

1802 High-lift Airfoil Design for a Take-Off Configuration Using Kriging Based GA

Kazuomi Yamamoto, Mitsuhiro Murayama, Masahiro Kanazaki, 2007 .

Numerical Investigation on Change of Airframe Noise by Flap Side-edge Shape

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2013 .

Efficient CFD Evaluation of Small Device Locations with Automatic Local Remeshing

Yasushi Ito, Alan M. Shih, Bharat K. Soni, 2008 .

CFD Comparison Study for Trapezoidal High-Lift Wing Configurations by Structured and Unstructured Mesh Method

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2011 .

A Robust Method for Unstructured Volume/Surface Mesh Movement

Kazuhiro Nakahashi, Mitsuhiro Murayama, Kisa Matsushima, 2003 .

Summary of the Fourth AIAA Computational Fluid Dynamics Drag Prediction Workshop

Edward N. Tinoco, Olaf Brodersen, John C. Vassberg, 2014 .

Drag Prediction on NASA Common Research Model Using Automatic Hexahedra Grid-Generation Method

Atsushi Hashimoto, Kazuomi Yamamoto, Mitsuhiro Murayama, 2014 .

Efficient Computational Fluid Dynamics Evaluation of Small-Device Locations with Automatic Local Remeshing

Alan M. Shih, Bharat K. Soni, Kazuomi Yamamoto, 2009 .

Computational and Experimental Study on Noise Generation from Tire-Axle Regions of a Two-Wheel Main Landing Gear

Long Wu, Kazuomi Yamamoto, Mitsuhiro Murayama, 2011 .

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series

Edward N. Tinoco, Olaf Brodersen, John C. Vassberg, 2008 .

Summary of JAXA Studies for the Fifth AIAA CFD Drag Prediction Workshop Using UPACS and FaSTAR

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2013 .

Efficient and Accurate Evaluation of Aircraft in Different Configurations with Automatic Local Remeshing

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2013 .

Challenge of design exploration for small blended wing body using unstructured flow solver

Kazuomi Yamamoto, Mitsuhiro Murayama, Masahiro Kanazaki, 2013 .

Efficient Optimization Design Method Using Kriging Model

Kazuomi Yamamoto, Mitsuhiro Murayama, Shinkyu Jeong, 2005 .

Far-Field Drag Analysis of NASA Common Research Model Simulation

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2011 .

Summary of Data from the Fifth AIAA CFD Drag Prediction Workshop

Edward N. Tinoco, Olaf Brodersen, Kelly R. Laflin, 2013 .

Comparison of NTF Experimental Data with CFD Predictions from the Third AIAA CFD Drag Prediction Workshop

Edward N. Tinoco, Olaf Brodersen, John C. Vassberg, 2008 .

Japan Aerospace Exploration Agency Studies for the Fifth AIAA Drag Prediction Workshop

Kazuomi Yamamoto, Kentaro Tanaka, Mitsuhiro Murayama, 2014 .

High-Quality Unstructured Hybrid Mesh Generation for Capturing Effects of Vortex Generators

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2013 .

Validation of Noise Reduction Design for Landing Gear in the FQUROH Flight Demonstration Project

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2019, Advanced Courses.

Viscous flow computations of aircraft with changing control surface deflection using unstructured dynamic meshes

Kazuhiro Nakahashi, Mitsuhiro Murayama, Yasushi Ito, 2006 .

Influence of Engine Intake/Exhaust on Wing Design of Civil Aircraft by Means of Knowledge Discovery Techniques

Kazuomi Yamamoto, Mitsuhiro Murayama, Masahiro Kanazaki, 2016 .

Investigation of Noise Generation from Bluff Flap Side-edge of a High-Lift Wing Model

Shigemi Shindo, Hiroshi Kobayashi, Kazuomi Yamamoto, 2014 .

Drag Prediction on NASA CRM Using Automatic Hexahedra Grid Generation

Kazuomi Yamamoto, Mitsuhiro Murayama, Atsushi Hashimoto, 2010 .

Computational Analysis of Noise Reduction Results for Flap Side-edges in the FQUROH Flight Demonstration Project

Ryotaro Sakai, Yasushi Ito, Kazuomi Yamamoto, 2019, 25th AIAA/CEAS Aeroacoustics Conference.

Support system for finite element analysis

Shigeru Nagasawa, Mitsuhiro Murayama, Hiroshi Sakuta, 1996 .

AQUAMI: An open source Python package and GUI for the automatic quantitative analysis of morphologically complex multiphase materials

Mitsuhiro Murayama, Joshua Stuckner, Ian McCue, 2017 .

Analysis of the NASA Common Research Model Using the TAS Code and MEGG3D Grids

Yasushi Ito, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017 .

Polycrystallinity of green rust minerals and their synthetic analogs: Implications for particle formation and reactivity in complex systems

Michael F. Hochella, Mitsuhiro Murayama, Kirsten Küsel, 2015 .

Computational Investigation of Vertical Stabilizer with Vortex Generators and Dorsal Fin

Shunsuke Koike, Kazuhiro Kusunose, Kazuomi Yamamoto, 2019, Journal of Aircraft.

Lattice-Boltzmann Simulations of the JAXA JSM High-Lift Configuration in a Wind Tunnel

Kazuomi Yamamoto, Mitsuhiro Murayama, Yasushi Ito, 2019, AIAA Scitech 2019 Forum.

Turbulent Flow Solver Validation of FaSTAR and UPACS

Kazuomi Yamamoto, Mitsuhiro Murayama, Atsushi Hashimoto, 2014 .

Experimental Investigation of Vertical Stabilizer with Vortex Generators and Dorsal Fin

Shunsuke Koike, Kazuhiro Kusunose, Kazuomi Yamamoto, 2018, 2018 Applied Aerodynamics Conference.

FQUROH: A Flight Demonstration Project for Airframe Noise Reduction Technology – the 2nd Flight Demonstration

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017, 2018 AIAA/CEAS Aeroacoustics Conference.

Effect of Cutting Line End of Paperboard on Pushing-LoadCharacteristic of Center Bevel Blade

Mitsuhiro Murayama, Shigeru Nagasawa, Yasushi Fukuzawa, 2007 .

Numerical Analysis of Steady Flow around a Landing Gear Noise Measurement Model

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2009 .

Acoustic Wind Tunnel Test with 18% Scale Half-span Model toward FQUROH Second Flight Demonstration

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017, Advanced Courses.

Cutting Characteristics on Surface Layer of Paperboard byCenter Bevel Blade

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2007 .

Flyover Array Measurements with JAXA Flying Test Bed ‘Hisho’

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2016 .

Comparison of Reynolds-averaged Navier-Stokes simulations of multi-element high-lift configurations

Kazuomi Yamamoto, Mitsuhiro Murayama, Taro Imamura, 2007 .

Stress analysis of wedged rupture in surface layer of coated paperboard

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2006 .

Efficient Hybrid Surface and Volume Mesh Generation for Viscous Flow Simulations

Alan M. Shih, Bharat K. Soni, Kazuomi Yamamoto, 2011 .

Discovery and characterization of silver sulfide nanoparticles in final sewage sludge products.

Mitsuhiro Murayama, Michael F Hochella, Chee-Sung Park, 2010, Environmental science & technology.

Integrated approaches of x-ray absorption spectroscopic and electron microscopic techniques on zinc speciation and characterization in a final sewage sludge product.

Mitsuhiro Murayama, Michael F Hochella, M. Murayama, 2014, Journal of environmental quality.

Cutting mechanism of aluminum foil on underlays during wedge shearing process

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2007 .

Cutting Mechanism and Load Characteristic of Trapezoidal Center Bevel Cutter Indented on Aluminum Sheet

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2004 .

Further Noise Reduction Design for Landing Gear toward FQUROH Second Flight Demonstration

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2018, 2018 AIAA/CEAS Aeroacoustics Conference.

Efficient Hybrid Surface/Volume Mesh Generation Using Suppressed Marching-Direction Method

Alan M. Shih, Bharat K. Soni, Kazuomi Yamamoto, 2013 .

Noise Reduction Design for Flap Side-edges toward FQUROH Second Flight Demonstration

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017, Advanced Courses.

An Aerodynamic Noise Reduction Study for Airframe Noise from Flap Tips

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2013 .

Aeroacoustic Simulation of JAXA Landing Gear by Building-Cube Method and Non-compact Curle's Equation

Kazuhiro Nakahashi, Daisuke Sasaki, Kazuomi Yamamoto, 2012 .

Glycerol Hydrogenolysis on Carbon-Supported PtRu and AuRu Bimetallic Catalysts

Mitsuhiro Murayama, Robert J. Davis, M. Murayama, 2007 .

Noise Generation Characteristics of a High-lift Swept and Tapered Wing Model

Shigemi Shindo, Kazuomi Yamamoto, Mitsuhiro Murayama, 2013 .

Airframe noise measurements on JAXA Jet Flying Test Bed “Hisho” using a phased microphone array

Ryotaro Sakai, Kazuomi Yamamoto, Mitsuhiro Murayama, 2017 .

Computational study of low-noise fairings around tire-axle region of a two-wheel main landing gear

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2013 .

The structure and transformation of the nanomineral schwertmannite: a synthetic analog representative of field samples

Michael F. Hochella, Mitsuhiro Murayama, Niven Monsegue, 2014, Physics and Chemistry of Minerals.

Influence of size and aggregation on the reactivity of an environmentally and industrially relevant nanomaterial (PbS).

Mitsuhiro Murayama, Michael F Hochella, M. Murayama, 2009, Environmental science & technology.

Characterization and environmental implications of nano- and larger TiO(2) particles in sewage sludge, and soils amended with sewage sludge.

Michael F. Hochella, Mitsuhiro Murayama, Benjamin P Colman, 2012, Journal of environmental monitoring : JEM.

PowerFLOW Simulations for the Third AIAA High-Lift Prediction Workshop

Mitsuhiro Murayama, Yasushi Ito, Ehab Fares, 2018 .

Experimental Investigation of Vortex Generator Effect on Two- and Three-Dimensional NASA Common Research Models

Seigo Koga, Shunsuke Koike, Kazuhiro Kusunose, 2015 .

PRE-PRECIPITATE CLUSTERS AND PRECIPITATION PROCESSES IN Al-Mg-Si ALLOYS

Mitsuhiro Murayama, Kazuhiro Hono, K. Hono, 1999 .

Effect of Vortex Generators on Transonic Swept Wings

Shunsuke Koike, Kazuhiro Kusunose, Kazuomi Yamamoto, 2015 .

Aerodynamic Influence of a Half-Span Model Installation for High-Lift Configuration Experiment

Kazuomi Yamamoto, Mitsuhiro Murayama, Yuzuru Yokokawa, 2010 .

Noise Reduction Design for Landing Gear toward FQUROH Flight Demonstration

Kazuomi Yamamoto, Mitsuhiro Murayama, Yasushi Ito, 2017 .

Study on Noise Generation from Slat Tracks Using a High-Lift Wing Model

Kazuomi Yamamoto, Mitsuhiro Murayama, Yasushi Ito, 2015 .

Effect of Underlay Rigidity on Cutting Characteristic of Aluminum Foil during Wedge Shearing Process

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2008 .

Numerical simulation of vortex breakdown using adaptive grid refinement with vortex-center identification

Kazuhiro Nakahashi, Mitsuhiro Murayama, Keisuke Sawada, 2000 .

Simulation of Vortex Breakdown Using Adaptive Grid Refinement with Vortex-Center Identification

Kazuhiro Nakahashi, Mitsuhiro Murayama, Keisuke Sawada, 2001 .

Effect of tip profile on cutting processability of a trapezoidal cutting blade indented to an aluminum sheet

Shigeru Nagasawa, Yasushi Fukuzawa, Mitsuhiro Murayama, 2006 .