W. Yang

发表

A strain localization directed crack control strategy for designing MXene-based customizable sensitivity and sensing range strain sensors for full-range human motion monitoring

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Self-assembled core-shell polydopamine@MXene with synergistic solar absorption capability for highly efficient solar-to-vapor generation

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Nano Research.

Flexible Anti-biofouling MXene/Cellulose Fibrous Membrane for Sustainable Solar Driven Water Purification.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, ACS applied materials & interfaces.

Multilayer structured AgNW/WPU-MXene fiber strain sensors with ultrahigh sensitivity and a wide operating range for wearable monitoring and healthcare

Wei Yang, Zheng-Ying Liu, Kai Ke, 2019, Journal of Materials Chemistry A.

Macroporous three-dimensional MXene architectures for highly efficient solar steam generation

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Journal of Materials Chemistry A.

Enhancing crystallization rate and melt strength of PLLA with four‐arm PLLA grafted silica: The effect of molecular weight of the grafting PLLA chains

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018 .

Preparation of cellulose-graft-polylactic acid via melt copolycondensation for use in polylactic acid based composites: synthesis, characterization and properties

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Constructing a special ‘sosatie’ structure to finely dispersing MWCNT for enhanced electrical conductivity, ultra-high dielectric performance and toughness of iPP/OBC/MWCNT nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Thermal and mechanical properties of chemical crosslinked polylactide (PLA)

Wei Yang, Wei Yang, Ming‐bo Yang, 2008 .

Largely enhanced thermal conductivity of poly (ethylene glycol)/boron nitride composite phase change materials for solar-thermal-electric energy conversion and storage with very low content of graphene nanoplatelets

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Mechanical Properties of Glass Bead-Filled Linear Low-Density Polyethylene

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2004 .

Facile Method to Fabricate Highly Thermally Conductive Graphite/PP Composite with Network Structures.

Wei Yang, Jun Chen, C. Feng, 2016, ACS applied materials & interfaces.

Boosting piezoelectric response of PVDF-TrFE via MXene for self-powered linear pressure sensor

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2021 .

High Efficiency Conversion of Regenerated Cellulose Hydrogel Directly to Functionalized Cellulose Nanoparticles.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017, Macromolecular rapid communications.

Effect of aspect ratio of multi-wall carbon nanotubes on the dispersion in ethylene-α-octene block copolymer and the properties of the Nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Journal of Polymer Research.

Dopamine-induced functionalization of cellulose nanocrystals with polyethylene glycol towards poly(L-lactic acid) bionanocomposites for green packaging.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Carbohydrate polymers.

Effect of chain entanglement on the melt-crystallization behavior of poly(l-lactide) acid

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2016, Journal of Polymer Research.

Double yielding in PA6/TPV‐MAH blends: Effect of crosslinking degree of the dispersed phase

Wei Yang, Ming‐bo Yang, M. Hou, 2009 .

Effect of the content of β form crystals on biaxially stretched polypropylene microporous membranes and the tuning of pore structures

G. Wu, Chao Ding, Ya Zhang, 2019, Polymer.

Unique crystallization behaviors of isotactic polypropylene in the presence of MWCNT supported β nucleating agent: Lower temperature T(αβ)-T(βα) interval and fast cooling preferred formation of β crystals

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Deformation-induced structure evolution of oriented β-polypropylene during uniaxial stretching

Ming‐bo Yang, Zhengying Liu, Rui‐Ying Bao, 2013 .

MWCNTs Supported N,N′-Dicyclohexyl-1,5-diamino-2,6-naphthalenedicarboxamide: A Novel β-Nucleating Agent for Polypropylene

Wei Yang, Ming‐bo Yang, K. Zhan, 2012 .

The enhanced nucleating ability of carbon nanotube-supported β-nucleating agent in isotactic polypropylene

Ben Wang, Wei Yang, Ming‐bo Yang, 2010 .

Crystalline morphology of β-nucleated controlled-rheology polypropylene

Xiangfang Peng, Wei Yang, Ming‐bo Yang, 2008 .

Investigation on the reactive processing of textile-ramie fiber reinforced anionic polyamide-6 composites

Ming‐bo Yang, Zhengying Liu, Ze Kan, 2015 .

Green and robust superhydrophilic electrospun stereocomplex polylactide membranes: Multifunctional oil/water separation and self-cleaning

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Poly(l-lactic acid)-polyethylene glycol-poly(l-lactic acid) triblock copolymer: A novel macromolecular plasticizer to enhance the crystallization of poly(l-lactic acid)

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2017 .

Polymorphism of a high-molecular-weight racemic poly(L-lactide)/poly(D-lactide) blend: effect of melt blending with poly(methyl methacrylate)

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Transparent and ductile poly(lactic acid)/poly(butyl acrylate) (PBA) blends: Structure and properties

B. Meng, Wei Yang, Qing Liu, 2012 .

The effect of chain mobility on the coarsening process of co-continuous, immiscible polymer blends under quiescent melt annealing.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017, Physical chemistry chemical physics : PCCP.

Boosting solar steam generation in dynamically tunable polymer porous architectures

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Effect of nano-silica on the phase inversion behavior of immiscible PA6/ABS blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013 .

Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Interfacial relaxation mechanisms in polymer nanocomposites through the rheological study on polymer/grafted nanoparticles

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Inorganic silica functionalized with PLLA chains via grafting methods to enhance the melt strength of PLLA/silica nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2014 .

Chemically bonding BaTiO3 nanoparticles in highly filled polymer nanocomposites for greatly enhanced dielectric properties

Wei Yang, Ming‐bo Yang, Jinkai Yuan, 2020, Journal of Materials Chemistry C.

Formation and evolution of the carbon black network in polyethylene/carbon black composites: Rheology and conductivity properties

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2014 .

Temperature induced gelation transition of a fumed silica/PEG shear thickening fluid

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2015 .

A rheological study on temperature dependent microstructural changes of fumed silica gels in dodecane

Wei Yang, Ming‐bo Yang, Yu Wang, 2012 .

Aggregate of nanoparticles: rheological and mechanical properties

Wei Yang, Ming‐bo Yang, Yu Wang, 2011, Nanoscale research letters.

Structure of fumed silica gels in dodecane: enhanced network by oscillatory shear

Wei Yang, Ming‐bo Yang, Yu Wang, 2011, Colloid and Polymer Science.

Dynamic Rheological Behavior of Copolymerized Linear Low-Density Polyethylenes: Effect of Molecular Weight and Its Distribution

Wei Yang, Ming‐bo Yang, Yu Wang, 2009 .

The effect of the grafted chains on the crystallization of PLLA/PLLA-grafted SiO2 nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016, Colloid and Polymer Science.

Improving the integration of HDPE/UHMWPE blends by high temperature melting and subsequent shear

Wei Yang, Ming‐bo Yang, Lei He, 2015 .

Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014 .

Redox‐Mediated Artificial Non‐Enzymatic Antioxidant MXene Nanoplatforms for Acute Kidney Injury Alleviation

Wei Yang, Ming‐bo Yang, Kai Ke, 2021, Advanced science.

Chemical-resistant polyamide 6/polyketone composites with gradient encapsulation structure: An insight into the formation mechanism

Wei Yang, Ming‐bo Yang, Yue Wang, 2020 .

Tannic acid functionalized graphene hydrogel for organic dye adsorption.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Ecotoxicology and environmental safety.

Synthesis of thermoplastic cellulose grafted polyurethane from regenerated cellulose

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020, Cellulose.

Vitrimeric Polylactide by Two-step Alcoholysis and Transesterification during Reactive Processing for Enhanced Melt Strength.

Y. Liu, Wei Yang, Ming‐bo Yang, 2022, ACS applied materials & interfaces.

Anisotropic microstructure-impact fracture behavior relationship of polycarbonate/polyethylene blends injection-molded at different temperatures

Rui Huang, Zhong‐Ming Li, Wei Yang, 2005 .

Morphology Dependent Double Yielding in Injection Molded Polycarbonate/Polyethylene Blend

Rui Huang, Zhong‐Ming Li, Wei Yang, 2004 .

Study on the melt flow behavior of glass bead filled polypropylene

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2005 .

Recent progress on chemical modification of cellulose for high mechanical-performance Poly(lactic acid)/Cellulose composite: A review

Wei Yang, Ming‐bo Yang, Ling Zhou, 2021 .

Unusual positive temperature coefficient effect of polyolefin/carbon fiber conductive composites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Gas-assisted Injection Molded Polypropylene/Glass Fiber Composite: Foaming Structure and Tensile Strength

Qian Li, G. Zheng, Jingbo Chen, 2009 .

Gas-assisted injection molded polypropylene: The skin-core structure

Changyu Shen, Qian Li, G. Zheng, 2008 .

Highly sensitive and multifunctional piezoresistive sensor based on polyaniline foam for wearable Human-Activity monitoring

Shilin Huang, Wei Yang, Ming‐bo Yang, 2019, Composites Part A: Applied Science and Manufacturing.

Thermal Oxidation and Structural Changes of Degraded Polyethylene in an Oxygen Atmosphere

Ming‐bo Yang, Quan-Bing Wang, Bang-hu Xie, 2011 .

Structure and Properties of Radiation Cross-Linked Polypropylene Foam

Wei Yang, Ming‐bo Yang, Jian-min Feng, 2011 .

Influences of molecular weight and crystalline structure on fracture behavior of controlled-rheology-polypropylene prepared by reactive extrusion

Ming‐bo Yang, Jian-min Feng, Bin Li, 2008 .

Nanoparticle retarded shape relaxation of dispersed droplets in polymer blends: an understanding from the viewpoint of molecular movement

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014 .

Continuous extrusion and tensile strength of self-reinforced HDPE/UHMWPE sheet

Wei Yang, Jun Chen, Haiying Ni, 2008 .

Essential Work of Fracture Evaluation of Compression-Molded Polypropylene/Ethylene and 1-Octene Copolymer Blends

Wei Yang, Ming‐bo Yang, Lei Wang, 2010 .

Micro-Structure and Fracture Behavior of High-Melt-Strength PPs Prepared by Reactive Extrusion

Wei Yang, Ming‐bo Yang, Yucheng Hou, 2012 .

Synergistic effect of stereocomplex crystals and shear flow on the crystallization rate of poly(L-lactic acid): A rheological study

Wei Yang, Ming‐bo Yang, Tao Zhou, 2014 .

Thermal properties and flame retardancy of polycarbonate/hydroxyapatite nanocomposite

Wei Yang, Ming‐bo Yang, Xin Liu, 2008 .

A Green and Facile Melt Approach for Hierarchically Porous Polylactide Monoliths Based on Stereocomplex Crystallite Network

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Supercooling-dependent morphology evolution of an organic nucleating agent in poly(L-lactide)/poly(D-lactide) blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Enhancing Thermomechanical Properties and Heat Distortion Resistance of Poly(l-lactide) with High Crystallinity under High Cooling Rate

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Excellent mechanical performance and enhanced dielectric properties of OBC/SiO2 elastomeric nanocomposites: effect of dispersion of the SiO2 nanoparticles

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Phase morphology control and the selective localization of MWCNT for suppressing dielectric loss and enhancing the dielectric constant of HDPE/PA11/MWCNT composites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Suppressing phase coarsening in immiscible polymer blends using nano-silica particles located at the interface

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2015 .

Toughening of polyamide 6 with β-nucleated thermoplastic vulcanizates based on polypropylene/ethylene–propylene–diene rubber grafted with maleic anhydride blends

Wei Yang, Ming‐bo Yang, Li-Feng Ma, 2012 .

Scalable Synthesis of an Artificial Polydopamine Solid‐Electrolyte‐Interface‐Assisted 3D rGO/Fe 3 O 4 @PDA Hydrogel for a Highly Stable Anode with Enhanced Lithium‐Ion‐Storage Properties

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2019, ChemElectroChem.

Self-Assembled Sponge-like Chitosan/Reduced Graphene Oxide/Montmorillonite Composite Hydrogels without Cross-Linking of Chitosan for Effective Cr(VI) Sorption

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Polysulfide Catalytic Materials for Fast‐Kinetic Metal–Sulfur Batteries: Principles and Active Centers

Shuang Li, F. Ran, Wei Yang, 2021, Advanced science.

Recent Advances in Multiresponsive Flexible Sensors towards E-skin: A Delicate Design for Versatile Sensing.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Small.

Advanced Graphene@Sulfur composites via an in-situ reduction and wrapping strategy for high energy density lithium–sulfur batteries

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2019, Carbon.

Transcrystallinity in a Polycarbonate(PC)/Polyethylene(PE) Blend Prepared by Gas-Assisted Injection Molding: A New Understanding of Its Formation Mechanism

Changyu Shen, Qian Li, Chuntai Liu, 2008 .

Melt viscoelasticity, electrical conductivity, and crystallization of PVDF/MWCNT composites: Effect of the dispersion of MWCNTs

Wei Yang, Ming‐bo Yang, Yu Wang, 2012 .

Crystallization and reinforcement of poly (vinylidene fluoride) nanocomposites: Role of high molecular weight resin and carbon nanotubes

Wei Yang, Ming‐bo Yang, Yu Wang, 2012 .

Morphology, interfacial and mechanical properties of polylactide/poly(ethylene terephthalate glycol) blends compatibilized by polylactide-g-maleic anhydride

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2014 .

Grafted Polyolefin-Coated Synthetic Mica-Filled Polypropylene-co-ethylene Composites: A Study on the Interfacial Morphology and Properties

Wei Yang, Ming‐bo Yang, Lei Wang, 2010 .

Effect of Dispersion Condition of Calcium Carbonate on the Crystallization and Melting Behavior of Polypropylene/CaCO3 Nanocomposites

Wei Yang, Ming‐bo Yang, R. Tao, 2008 .

The β Phase of Isotactic Polypropylene in TPVs Based on PP/EPDM

Q. Fu, Wei Yang, Ming‐bo Yang, 2007 .

Low percolation threshold and balanced electrical and mechanical performances in polypropylene/carbon black composites with a continuous segregated structure

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2016 .

Evolution of agglomerate structure of carbon nanotubes in multi-walled carbon nanotubes/polymer composite melt: A rheo-electrical study

Wei Yang, Ming‐bo Yang, Banghu Xie, 2012 .

Effect of temperature gradient on the development of β phase polypropylene in dynamically vulcanized PP/EPDM blends

Wei Yang, Ming‐bo Yang, M. Hou, 2009 .

Effect of cross-linking degree of EPDM phase on the electrical properties and formation of dual networks of thermoplastic vulcanizate composites based on isotactic polypropylene (iPP)/ethylene–propylene–diene rubber (EPDM) blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Conductive thermoplastic vulcanizates (TPVs) based on polypropylene (PP)/ethylene-propylene-diene rubber (EPDM) blend: From strain sensor to highly stretchable conductor

Wei Yang, Zheng-Ying Liu, Wei Yang, 2016 .

A high-performance temperature sensitive TPV/CB elastomeric composite with balanced electrical and mechanical properties via PF-induced dynamic vulcanization

Q. Fu, Wei Yang, Ming‐bo Yang, 2014 .

Double yielding in PA6/TPV–MAH blends: Effect of dispersed phase with different content, modulus

Q. Fu, Wei Yang, Ming‐bo Yang, 2007 .

Largely enhanced molecular orientation and mechanical property of injection-molded high-density polyethylene parts via the synergistic effect of polyamide 6 in situ microfibrillar and intense shear flow

Jingshen Wu, Ming‐bo Yang, Jian-min Feng, 2014, Colloid and Polymer Science.

Crystallization and phase morphology of injection‐molded isotactic polypropylene (iPP)/syndiotactic polypropylene (sPP) blends

G. Zheng, Ming‐bo Yang, Bang-hu Xie, 2007 .

Mechanical Properties and Morphology of LDPE/PP Blends

Wei Yang, Ming‐bo Yang, Guifang Shan, 2007 .

Large scale formation of various highly oriented structures in polyethylene/polycarbonate microfibril blends subjected to secondary melt flow

Quanchao Zhang, Wei Yang, Ming‐bo Yang, 2014 .

Balanced strength and ductility improvement of in situ crosslinked polylactide/poly(ethylene terephthalate glycol) blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Cylindritic structures of high-density polyethylene molded by multi-melt multi-injection molding

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2011 .

Non-isothermal crystallization of polyethylene blends with bimodal molecular weight distribution

Wei Yang, Ming‐bo Yang, Banghu Xie, 2013 .

Suppressing phase retraction and coalescence of co-continuous polymer blends: effect of nanoparticles and particle network

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014 .

Studies on the Blends of Polyamide66 and Thermoplastic Polyimide

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2010 .

Effect of temperature and strain rate on the tensile deformation of polyamide 6

Q. Fu, Wei Yang, Ming‐bo Yang, 2007 .

Toughening of polypropylene with β-nucleated thermoplastic vulcanizates based on polypropylene/ethylene–propylene–diene rubber blends

Wei Yang, Ming‐bo Yang, Li-Feng Ma, 2013 .

Co-crystallization of Blends of High-density Polyethylene with Linear Low-density Polyethylene: An Investigation with Successive Self-nucleation and Annealing (SSA) Technique

Ming‐bo Yang, Hongwang Shen, Bang-hu Xie, 2013 .

Rheological behavior and mechanical properties of high‐density polyethylene blends with different molecular weights

Wei Yang, Ming‐bo Yang, L. Bai, 2010 .

Effect of Viscosity Ratio on the Crystalline Morphologies and Mechanical Property of Multi-Melt Multi-Injection Molded Parts

Jingshen Wu, Chao-liang Zhang, Wei Yang, 2014 .

Smart Ti3C2Tx MXene Fabric with Fast Humidity Response and Joule Heating for Healthcare and Medical Therapy Applications.

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2020, ACS nano.

Low-entropy structured wearable film sensor with piezoresistive-piezoelectric hybrid effect for 3D mechanical signal screening

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Nano Energy.

In-situ construction of high-modulus nanospheres on elastomer fibers for linearity-tunable strain sensing

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Chemical Engineering Journal.

Effect of EPDM Content on Melt Flow, Microstructures and Fracture Behavior of Dynamically Vulcanized PP/EPDM Blends

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2007 .

Morphology and mechanical property of high-density polyethylene parts prepared by gas-assisted injection molding

Wei Yang, Ming‐bo Yang, B. Yin, 2011 .

Simulation of Gas-Assisted Injection Molding of High-Density Polyethylene: The Role of Rheological Properties and Physical Fields on the Crystalline Morphology

Wei Yang, Ming‐bo Yang, Sheng-yan Hu, 2009 .

Banded spherulites of HDPE molded by gas-assisted and conventional injection molding

G. Zheng, Wei Yang, Ming‐bo Yang, 2008 .

Tailoring crystalline structures and mechanical properties of injection-molded polyethylene by tuning the relaxation time of molecular chains

Ming‐bo Yang, Xiaochao Xia, Long Wang, 2015 .

Simulation of phase-change heat transfer during cooling stage of gas-assisted injection molding of high-density polyethylene via enthalpy transformation approach

Ming‐bo Yang, Sheng-yan Hu, Bin Yang, 2009 .

Anomalous Melt Rheological Properties of Unimodal-MWD HDPE Blends

Wei Yang, Ming‐bo Yang, G. Gong, 2010 .

A highly-deformable piezoresistive film composed of a network of carbon blacks and highly oriented lamellae of high-density polyethylene

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Formation mechanism of hierarchically crystalline structures under coupled external fields in multi-melt multi-injection molding: Simulation and experiment

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

The formation of interfacial morphologies of iPP derived from transverse flow during multi-penetration in secondary melt flow

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Morphologies of injection molded isotactic polypropylene/ultra high molecular weight polyethylene blends

Wei Yang, Banghu Xie, Ming-Bo Yang, 2012 .

Hierarchical Distribution of β-Phase in Compression- and Injection-Molded, Polypropylene-Based TPV

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2010 .

Effect of spatial confinement on the development of β phase of polypropylene

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2009 .

Morphology and nonisothermal crystallization of in situ microfibrillar poly(ethylene terephthalate)/polypropylene blend fabricated through slit‐extrusion, hot‐stretch quenching

Rui Huang, Zhong‐Ming Li, Wei Yang, 2004 .

Strong shear-driven large scale formation of hybrid shish-kebab in carbon nanofiber reinforced polyethylene composites during the melt second flow.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016, Physical chemistry chemical physics : PCCP.

Mechanical and thermal characteristics and morphology of polyamide 6/isotactic polypropylene blends in the presence of a β‐nucleating agent

Ming‐bo Yang, Shi-wei Wang, Jie Li, 2011 .

Morphology and fracture behaviour of poly(vinyl chloride)/ethylene-vinyl acetate copolymer blends

Y. Liu, Wei Yang, Ming‐bo Yang, 2007 .

Multi-dimensional strain sensor based on carbon nanotube film with aligned conductive networks

Wei Yang, Li-Feng Ma, Jincheng Wang, 2018, Composites Science and Technology.

Thermal and rheological properties of polyethylene blends with bimodal molecular weight distribution

Wei Yang, Ming‐bo Yang, Banghu Xie, 2013 .

Morphology and Tensile Strength Prediction of in situ Microfibrillar Poly(ethylene terephthalate)/Polyethylene Blends Fabricated via Slit‐Die Extrusion‐Hot Stretching‐Quenching

Rui Huang, K. Shen, Zhong‐Ming Li, 2004 .

Effective dissolution of UHMWPE in HDPE improved by high temperature melting and subsequent shear

Wei Yang, Ming‐bo Yang, Lei He, 2015 .

Crystallization and fracture behaviors of high‐density polyethylene/linear low‐density polyethylene blends: The influence of short‐chain branching

Wei Yang, Ming‐bo Yang, Hongwang Shen, 2013 .

Hierarchical unidirectional graphene aerogel/polyaniline composite for high performance supercapacitors

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Journal of Power Sources.

Hierarchical crystalline structure of HDPE molded by gas-assisted injection molding

Changyu Shen, Qian Li, G. Zheng, 2007 .

The role of gas penetration on morphological formation of polycarbonate/polyethylene blend molded by gas-assisted injection molding

Changyu Shen, Qian Li, Chuntai Liu, 2007 .

Morphology-tensile behavior relationship in injection molded poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends (I) Part I Skin-core Structure

Rui Huang, Zhong‐Ming Li, Shu‐Gui Yang, 2004 .

Formation of oriented β‐transcrystals induced by self‐assembly of nucleating agent and its micropores formation during uniaxial stretching

Yu Yang, G. Wu, Chao Ding, 2020 .

Towards balanced strength and toughness improvement of isotactic polypropylene nanocomposites by surface functionalized graphene oxide

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2014 .

Unusual hierarchical structures of mini-injection molded isotactic polypropylene/ultrahigh molecular weight polyethylene blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013 .

Control of morphology and properties by the selective distribution of nano-silica particles with different surface characteristics in PA6/ABS blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2012, Journal of Materials Science.

A particular interfacial strategy in PVDF/OBC/MWCNT nanocomposites for high dielectric performance and electromagnetic interference shielding

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018 .

Suppression of phase coarsening in immiscible, co-continuous polymer blends under high temperature quiescent annealing.

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014, Soft matter.

Progress in polyketone materials: blends and composites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Polymer International.

Effect of Cross-Linking Degree of EPDM Phase on the Morphology Evolution and Crystallization Behavior of Thermoplastic Vulcanizates Based on Polyamide 6 (PA6)/Ethylene-Propylene-Diene Rubber (EPDM) Blends

Wei Yang, Lifeng Ma, Hui Guo, 2019, Polymers.

Double yielding behaviors of polyamide 6 and glass bead filled polyamide 6 composites

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2005 .

Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: In-situ SAXS and WAXD studies

G. Wu, Chao Ding, Wei Yang, 2019, Polymer.

Oriented polypropylene cast films consisted of β-transcrystals induced by the nucleating agent self-assembly and its homogeneous membranes with high porosity

G. Wu, Chao Ding, Wei Yang, 2018, Polymer.

Distinct positive temperature coefficient effect of polymer-carbon fiber composites evaluated in terms of polymer absorption on fiber surface.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016, Physical chemistry chemical physics : PCCP.

Flexible and Tough Cellulose Nanocrystal/Polycaprolactone Hybrid Aerogel Based on the Strategy of Macromolecule Cross-Linking via Click Chemistry

Wei Yang, Ming‐bo Yang, Ling Zhou, 2019, ACS Sustainable Chemistry & Engineering.

Morphological Study of Linear Low-Density Polyethylene Molded by Gas-Assisted Injection Molding

Ming‐bo Yang, Long Wang, Bin Yang, 2011 .

Stress relaxation behavior of high density polyethylene (HDPE) articles molded by gas-assisted injection molding

Wei Yang, Ming‐bo Yang, Ying Lu, 2010 .

Multiple melting behaviour of annealed crystalline polymers

Y. Mai, Q. Fu, Wei Yang, 2010 .

Fracture behavior of bimodal polyethylene: Effect of molecular weight distribution characteristics

Wei Yang, Ming‐bo Yang, Hongwang Shen, 2011 .

Essential work of fracture evaluation of fracture behavior of glass bead filled linear low‐density polyethylene

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2006 .

Essential work of fracture (EWF) analysis for polypropylene grafted with maleic anhydride modified polypropylene/calcium carbonate composites

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2005 .

Essential Work of Fracture Parameters of in‐situ Microfibrillar Poly(ethylene terephthalate)/Polyethylene Blend: Influences of Blend Composition

Rui Huang, Zhong‐Ming Li, Wei Yang, 2004 .

Vitrimers of polyolefin elastomer with physically cross-linked network

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Journal of Polymer Research.

Multifunctional and highly sensitive piezoresistive sensing textile based on a hierarchical architecture

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Metal–Organic‐Framework‐Derived Nanostructures as Multifaceted Electrodes in Metal–Sulfur Batteries

Shuang Li, F. Ran, Wei Yang, 2021, Advanced materials.

Tuning the structure of graphene oxide and the properties of poly(vinyl alcohol)/graphene oxide nanocomposites by ultrasonication

Wei Yang, Zheng-Ying Liu, Wei Yang, 2013 .

Transcrystalline morphology of an in situ microfibrillar poly(ethylene terephthalate)/poly(propylene) blend fabricated through a slit extrusion hot stretching-quenching process

Rui Huang, K. Shen, Zhong‐Ming Li, 2004 .

Effect of Melt and Mold Temperatures on the Solidification Behavior of HDPE during Gas-Assisted Injection Molding: An Enthalpy Transformation Approach

Wei Yang, Ming‐bo Yang, Sheng-yan Hu, 2009 .

Morphology of gas‐assisted and conventional injection molded polycarbonate/polyethylene blend

Changyu Shen, Chuntai Liu, G. Zheng, 2006 .

Influence of molecular weight on impact fracture behavior of injection molded high density polyethylene: Scanning electron micrograph observations

B. Li, Wei Yang, Ming‐bo Yang, 2008 .

Crystallization and morphology of iPP/MWCNT prepared by compounding iPP melt with MWCNT aqueous suspension

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2009 .

A novel approach in preparing polymer/nano-CaCO3 composites

Ming‐bo Yang, Zhengying Liu, B. Yin, 2008 .

Electrical properties and morphology of carbon black filled PP/EPDM blends: effect of selective distribution of fillers induced by dynamic vulcanization

Shilin Huang, Wei Yang, Ming‐bo Yang, 2013, Journal of Materials Science.

Hierarchical crystalline structures induced by temperature profile in HDPE bars during melt penetration process

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Grafting polymerization of polylactic acid on the surface of nano‐SiO2 and properties of PLA/PLA‐grafted‐SiO2 nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013 .

Synthesis of Inorganic Silica Grafted Three-arm PLLA and Their Behaviors for PLA Matrix

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Chinese Journal of Polymer Science.

Mechanical properties and fracture behavior of injection and compression molded polypropylene/coal gangue powder composites with and without a polymeric coupling agent

Wei Yang, G. Gong, Wei-qin Zhang, 2007 .

Hierarchical crystalline morphologies induced by a distinctly different melt penetrating process

Quanchao Zhang, Wei Yang, Ming‐bo Yang, 2015 .

Effect of entropy penalty on selective distribution of aluminum borate whiskers in isotactic polypropylene (iPP)/syndiotactic polypropylene (sPP) blends

Ming‐bo Yang, W. Yang, Xiao-Xuan Zou, 2009 .

The effects of dioctyl phthalate plasticization on the morphology and thermal, mechanical, and rheological properties of chemical crosslinked polylactide

B. Meng, Wei Yang, Sen-lin Yang, 2009 .

Flexible shape-stabilized phase change materials with passive radiative cooling capability for thermal management

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

High-performance composite phase change materials for energy conversion based on macroscopically three-dimensional structural materials

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Materials Horizons.

Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials

Wei Yang, Ming‐bo Yang, Menglin Li, 2018, Energy Storage Materials.

Hierarchically interconnected porous scaffolds for phase change materials with improved thermal conductivity and efficient solar-to-electric energy conversion.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017, Nanoscale.

Deformation-induced morphology evolution during uniaxial stretching of isotactic polypropylene: effect of temperature

G. Zhong, Wei Yang, Ming‐bo Yang, 2012, Colloid and Polymer Science.

EFFECT OF THE CONTENT OF HIGH MOLECULAR WEIGHT COMPONENT ON PP MICROPOROUS MEMBRANES OBTAINED BY MELT-EXTRUSION-STRETCHING METHOD: EFFECT OF THE CONTENT OF HIGH MOLECULAR WEIGHT COMPONENT ON PP MICROPOROUS MEMBRANES OBTAINED BY MELT-EXTRUSION-STRETCHING METHOD

Ming‐bo Yang, Zhengying Liu, Zhitian Ding, 2012 .

Recent advances in polymer-based thermal interface materials for thermal management: A mini-review

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Effect of repetitive processing on the mechanical properties and fracture toughness of dynamically vulcanized iPP/EPDM blends

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2011 .

Composition, Morphology and Properties of Poly(lactic acid) and Poly(butylene succinate) Copolymer System via Coupling Reaction

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013 .

High-performance porous polylactide stereocomplex crystallite scaffolds prepared by solution blending and salt leaching.

Yunbing Wang, Wei Yang, Ming‐bo Yang, 2018, Materials science & engineering. C, Materials for biological applications.

Stereocomplex formation of high-molecular-weight polylactide: A low temperature approach

Q. Fu, Wei Yang, Ming‐bo Yang, 2012 .

Self-assembled high-strength hydroxyapatite/graphene oxide/chitosan composite hydrogel for bone tissue engineering.

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2017, Carbohydrate polymers.

Multifunctional Thermal Management Materials with Excellent Heat Dissipation and Generation Capability for Future Electronics.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, ACS applied materials & interfaces.

A new approach to construct segregated structures in thermoplastic polyolefin elastomers towards improved conductive and mechanical properties

Wei Yang, Ming‐bo Yang, Li-Feng Ma, 2015 .

High-efficient crystallization promotion and melt reinforcement effect of diblock PDLA-b-PLLA copolymer on PLLA

Wei Yang, Ming‐bo Yang, Yuanping Jiang, 2020 .

Effect of annealing temperature on the mechanical properties, thermal behavior and morphology of β-iPP/PA6 blends

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2012 .

Influence of multiwall carbon nanotubes on the morphology, melting, crystallization and mechanical properties of polyamide 6/acrylonitrile–butadiene–styrene blends

Wei Yang, Ming‐bo Yang, Xi-qiang Liu, 2012 .

Investigation on Tensile Deformation Behavior of Semi-Crystalline Polymers

Y. Mai, Q. Fu, Wei Yang, 2009 .

Double yielding in PA6: Effect of mold temperature and moisture content

Q. Fu, Wei Yang, Ming‐bo Yang, 2007 .

An extremely uniform dispersion of MWCNTs in olefin block copolymers significantly enhances electrical and mechanical performances

Wei Yang, Ming‐bo Yang, Li-Feng Ma, 2015 .

Selective distribution and migration of carbon nanotubes enhanced electrical and mechanical performances in polyolefin elastomers

Zhanhu Guo, Wei Yang, Ming‐bo Yang, 2017 .

Dynamic Rheological Behavior of HDPE/UHMWPE Blends

Hefei Zhou, Wei Yang, Ming‐bo Yang, 2011 .

Microencapsulation of decabromodiphenyl ether by in situ polymerization: Preparation and characterization

Wei Yang, Ming‐bo Yang, Jian-min Feng, 2007 .

An ice-templated assembly strategy to construct graphene oxide/boron nitride hybrid porous scaffolds in phase change materials with enhanced thermal conductivity and shape stability for light–thermal–electric energy conversion

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Structure and Properties of Reactive Extruded Ethylene-block-co-Polypropylene: Influence of Dicumyl Peroxide and Divinylbenzene

Wei Yang, Ming‐bo Yang, Bang-hu Xie, 2008 .

Tailoring Crystalline Morphology by High-Efficiency Nucleating Fiber: Toward High-Performance Poly(l-lactide) Biocomposites.

Le Li, Wei Yang, Ming‐bo Yang, 2018, ACS applied materials & interfaces.

The molecular weight dependence of the crystallization behavior of four-arm poly(L-lactide)

Ming‐bo Yang, Zhengying Liu, Shuyang Zhang, 2016, Colloid and Polymer Science.

High actuated performance MWCNT/Ecoflex dielectric elastomer actuators based on layer-by-layer structure

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Composites Part A: Applied Science and Manufacturing.

Boosting electrical and piezoresistive properties of polymer nanocomposites via hybrid carbon fillers: A review

I. Manas‐Zloczower, Wei Yang, Ming‐bo Yang, 2021 .

Stretchable conductors of multi-walled carbon nanotubes (MWCNTs) filled thermoplastic vulcanizate (TPV) composites with enhanced electromagnetic interference shielding performance

Wei Yang, Li-Feng Ma, Chao Jiang, 2020 .

Tailoring co-continuous like morphology in blends with highly asymmetric composition by MWCNTs: Towards biodegradable high-performance electrical conductive poly(l-lactide)/poly(3-hydroxybutyrate-co-4-hydroxybutyrate) blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Effects of modified nano-silica on the microstructure of PVDF and its microporous membranes

Wei Yang, Ming‐bo Yang, Meng Zhao, 2019, Journal of Polymer Research.

Microstructure and properties of CVD coated on gradient cemented carbide with different WC grain size

Jun Tang, M. Liang, J. Xiong, 2016 .

Contribution of residual solvent to the nucleation and reinforcement of poly (vinylidene fluoride)

Ming‐bo Yang, Rui‐Ying Bao, Kai Ke, 2014 .

A comparison of melt and solution mixing on the dispersion of carbon nanotubes in a poly(vinylidene fluoride) matrix

Wei Yang, Ming‐bo Yang, Yu Wang, 2012 .

Functionalized graphene oxide with ethylenediamine and 1,6-hexanediamine

Wei Yang, Ming‐bo Yang, Guiting Chen, 2012 .

Insight into the nucleating and reinforcing efficiencies of carbon nanofillers in poly(vinylidene fluoride): a comparison between carbon nanotubes and carbon black

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013, Journal of Materials Science.

Crystallization, rheological behavior and mechanical properties of poly(vinylidene fluoride) composites containing graphitic fillers: a comparative study

Wei Yang, Ming‐bo Yang, Yu Wang, 2012 .

Crystallization behavior of poly (vinylidene fluoride)/multi-walled carbon nanotubes nanocomposites

Wei Yang, Ming‐bo Yang, Banghu Xie, 2011 .

Two-step positive temperature coefficient effect with favorable reproducibility achieved by specific “island-bridge” electrical conductive networks in HDPE/PVDF/CNF composite

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Review on auxetic materials

Zhong‐Ming Li, Wei Yang, Banghu Xie, 2004 .

Electrically insulating, layer structured SiR/GNPs/BN thermal management materials with enhanced thermal conductivity and breakdown voltage

Wei Wu, Wei Yang, Ming‐bo Yang, 2018, Composites Science and Technology.

Polymorphism of racemic poly(L-lactide)/poly(D-lactide) blend: effect of melt and cold crystallization.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013, The journal of physical chemistry. B.

Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair.

Wei Yang, Peng Yu, Zong-ke Zhou, 2019, ACS nano.

The preparation, structures, and properties of poly(vinylidene fluoride)/multiwall carbon nanotubes nanocomposites

J. Zou, Zhonghua Zhu, Wei Yang, 2012 .

Rheological Behaviors of Poly(Vinylidene Fluoride)/“Bud-Branched” Nanotubes Nanocomposites

J. Zou, Zhonghua Zhu, M. Hou, 2012 .

Interfacial interaction of polyvinylidene fluoride/multiwalled carbon nanotubes nanocomposites: A rheological study

Wei Yang, Ming‐bo Yang, Banghu Xie, 2011 .

Nanofibrillar Polyvinyl Alcohol Ionic Organohydrogels for Smart Contact Lens and Human-Interactive Sensing.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020, ACS applied materials & interfaces.

Photodriven Shape-Stabilized Phase Change Materials with Optimized Thermal Conductivity by Tailoring the Microstructure of Hierarchically Ordered Hybrid Porous Scaffolds

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018 .

Polymer Composites for Thermal Energy Storage

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2021, Polymer Composites for Electrical Engineering.

Double-layered and shape-stabilized phase change materials with enhanced thermal conduction and reversible thermochromism for solar thermoelectric power generation

Ming‐bo Yang, Zhengying Liu, Rui‐Ying Bao, 2022, Chemical Engineering Journal.

Scalable Flexible Phase Change Materials with a Swollen Polymer Network Structure for Thermal Energy Storage.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, ACS applied materials & interfaces.

Hierarchically Porous PVA Aerogel for Leakage-Proof Phase Change Materials with Superior Energy Storage Capacity

Wei Yang, Ming‐bo Yang, L. Bai, 2020 .

Bacterial cellulose/MXene hybrid aerogels for photodriven shape-stabilized composite phase change materials

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019 .

Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage

Wei Yang, Ming‐bo Yang, D. Wei, 2017, Nano Research.

Characteristic Shear Rate for Nonlinear Viscoelastic Behavior in a Polydisperse Polymer Solution

Ming‐bo Yang, Yu Wang, Kai Ke, 2010 .

Influences of Tensile Deformation Rate on Deformation and Morphology of Injection Molded 15/85 (by Weight) PC/PE and PET/PE Blends with High Interfacial Contact

Rui Huang, Zhong‐Ming Li, Wei Yang, 2004 .

Structure and properties of PVD TiAlN and TiAlN/CrAlN coated Ti(C, N)-based cermets

Wei Yang, Jun Tang, J. Xiong, 2017 .

Prediction of Heat Conduction with Phase-change Effects during Cooling Stage of Injection Molding of High-density Polyethylene: Approximate Integral Approach

Wei Yang, Ming‐bo Yang, Sheng-yan Hu, 2010 .

Effects of convective schemes and geometric reconstruction scheme on interface of multiple melt flows

Wei Yang, Ming‐bo Yang, Xing Zhao, 2022, Polymer.

Simulation and experimental studies on the formation and evolution of hierarchical crystalline structures at the multi-melt flow interface

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Effect of graphite oxide structure on the formation of stable self-assembled conductive reduced graphite oxide hydrogel

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014 .

Study on Amino-functionalized Graphene Oxide/Poly(methyl methacrylate) Nanocomposites

Wei Yang, Ming‐bo Yang, Banghu Xie, 2012 .

Highly thermally conductive electrospun stereocomplex polylactide fibrous film dip-coated with silver nanowires

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Rational design and superfast production of biomimetic, calendering-compatible, catalytic, sulfur-rich secondary particles for advanced lithium-sulfur batteries

YU Peng, Xuewei Fu, Wei Yang, 2021 .

In situ interfacial engineering enabled mechanically adaptive and highly stretchable liquid metal conductor

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2021, Polymer.

Induced formation of dominating polar phases of poly(vinylidene fluoride): positive ion-CF2 dipole or negative ion-CH2 dipole interaction.

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014, The journal of physical chemistry. B.

Induced formation of polar phases in poly(vinylidene fluoride) by cetyl trimethyl ammonium bromide

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2014, Journal of Materials Science.

Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018 .

Electrolyte permeation and ion diffusion enhanced architectures for high performance all-solid-state flexible supercapacitors

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Numerical prediction of phase‐change heat conduction of injection‐molded high density polyethylene thick‐walled parts via the enthalpy transforming model with mushy zone

Ming‐bo Yang, Xiaowei Fu, Jian-min Feng, 2008 .

Effect of graphene oxides on thermal degradation and crystallization behavior of poly(L-lactide)

Ao Yang, Chao-liang Zhang, Wei Yang, 2014 .

All-weather-available, continuous steam generation based on the synergistic photo-thermal and electro-thermal conversion by MXene-based aerogels

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2020, Materials Horizons.

Interfacial Radiation-Absorbing Hydrogel Film for Efficient Thermal Utilization on Solar Evaporator Surfaces.

Wei Yang, Ming‐bo Yang, Xing Zhao, 2021, Nano letters.

Reinforcement and plasticization of PMMA grafted MWCNTs for PVDF composites

Wei Yang, Ming‐bo Yang, Rui Wen, 2013 .

Photo-Driven Self-Healing of Arbitrary Non-Destructive Damage in Polyethylene-Based Nanocomposites.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, ACS applied materials & interfaces.

Leakage-Proof Flexible Phase Change Gels with Salient Thermal Conductivity for Efficient Thermal Management.

Ming‐bo Yang, Zhengying Liu, Jie Yang, 2022, ACS applied materials & interfaces.

Highly thermally conductive UHMWPE/graphite composites with segregated structures

Wei Yang, Chang-Ping Feng, Jinyao Chen, 2016 .

Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2017 .

Leakage-Proof and Malleable Polyethylene Wax Vitrimer Phase Change Materials for Thermal Interface Management

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, ACS Applied Energy Materials.

Phase change mediated mechanically transformative dynamic gel for intelligent control of versatile devices.

Wei Yang, Ming‐bo Yang, L. Bai, 2021, Materials horizons.

Waterproof Phase Change Material with a Facilely Incorporated Cellulose Nanocrystal/Poly(N-isopropylacrylamide) Network for All-Weather Outdoor Thermal Energy Storage.

Wei Yang, Ming‐bo Yang, Li-Sheng Tang, 2020, ACS applied materials & interfaces.

Facile fabrication of shape-stabilized polyethylene glycol/cellulose nanocrystal phase change materials based on thiol-ene click chemistry and solvent exchange

Wei Yang, Ming‐bo Yang, Jie Yang, 2020 .

Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2014 .

Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Robust polymer-based paper-like thermal interface materials with a through-plane thermal conductivity over 9 Wm−1K−1

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020, Chemical Engineering Journal.

Reversible Formation of g‐C3N4 3D Hydrogels through Ionic Liquid Activation: Gelation Behavior and Room‐Temperature Gas‐Sensing Properties

Marco-Tulio F. Rodrigues, P. Ajayan, YU Peng, 2017 .

Faster and Better: A Polymeric Chaperone Binder for Microenvironment Management in Thick Battery Electrodes

Xuewei Fu, Wei Yang, Ming‐bo Yang, 2021, Energy Storage Materials.

High-melting-point crystals of poly(L-lactic acid) (PLLA): the most efficient nucleating agent to enhance the crystallization of PLLA

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2015 .

Atomic Layered Titanium Sulfide Quantum Dots as Electrocatalysts for Enhanced Hydrogen Evolution Reaction

P. Ajayan, R. Vajtai, Wei Yang, 2018 .

Effect of temperature, crystallinity and molecular chain orientation on the thermal conductivity of polymers: a case study of PLLA

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Journal of Materials Science.

Effect of phase coarsening under melt annealing on the electrical performance of polymer composites with a double percolation structure.

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2017, Physical chemistry chemical physics : PCCP.

A Facile Route to Fabricate Highly Anisotropic Thermally Conductive Elastomeric POE/NG Composites for Thermal Management

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018 .

2D TiS2 Layers: A Superior Nonlinear Optical Limiting Material

Sreekanth J. Varma, P. Ajayan, Jayan Thomas, 2017 .

Enhanced nonlinear optical limiting in TiS2 dichalcogenide 2D sheets

Jingjie Wu, Yang Liu, Wei Yang, 2017, Organic Photonics + Electronics.

Construction of dual conductive network in paper-based composites towards flexible degradable dual-mode sensor

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Composites Part A: Applied Science and Manufacturing.

Synthesis of an Efficient Processing Modifier Silica-g-poly(lactic acid)/poly(propylene carbonate) and Its Behavior for Poly(lactic acid)/Poly(propylene carbonate) Blends

M. Zhang, Wei Yang, Ming‐bo Yang, 2017 .

Study on the improved electromechanical properties of composited dielectric elastomer by tailoring three-dimensional segregated multi-walled carbon nanotube (MWCNT) network

Ming‐bo Yang, Zhengying Liu, Shaodi Zheng, 2022, Composites Science and Technology.

Heterogeneous Dispersion of the Compatibilizer in the Injection Molding of Polyamide 6/Polypropylene Blends

Wei Yang, Ming‐bo Yang, Yong Zhu, 2009 .

Hybrid graphene aerogels/phase change material composites: Thermal conductivity, shape-stabilization and light-to-thermal energy storage

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Effect of crystallinity level on the double yielding behavior of polyamide 6

Zhong‐Ming Li, Wei Yang, Ming‐bo Yang, 2006 .

Imidazole-functionalized polyketone-based polyelectrolytes with efficient ionic channels and superwettability for alkaline polyelectrolyte fuel cells and multiple liquid purification

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Electrospun Modified Polyketone-Based Anion Exchange Membranes with High Ionic Conductivity and Robust Mechanical Properties

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Direct modification of polyketone resin for anion exchange membrane of alkaline fuel cells.

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Journal of colloid and interface science.

Nanoscale Morphology, Interfacial Hydrogen Bonding, Confined Crystallization and Greatly Improved Toughness of Polyamide 12/Polyketone Blends

Siyuan Li, Wei Yang, Ming‐bo Yang, 2018, Nanomaterials.

Effect of carbon nanotube‐supported β nucleating agent on the thermal properties, morphology, and mechanical properties of polyamide 6/isotactic polypropylene blends

Ming‐bo Yang, K. Zhan, Shi-wei Wang, 2012 .

2D end-to-end carbon nanotube conductive networks in polymer nanocomposites: a conceptual design to dramatically enhance the sensitivities of strain sensors.

Zhanhu Guo, Wei Yang, Ming‐bo Yang, 2018, Nanoscale.

A unimorph nanocomposite dielectric elastomer for large out-of-plane actuation

Q. Pei, Zihang Peng, Wei Yang, 2022, Science advances.

Scalable fabrication of flexible piezoresistive pressure sensors based on occluded microstructures for subtle pressure and force waveform detection

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .

Role of poly(lactic acid) in the phase transition of poly(vinylidene fluoride) under uniaxial stretching

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2013 .

Tunable wrinkle structure formed on surface of polydimethylsiloxane microspheres

Shilin Huang, Wei Yang, Ming‐bo Yang, 2018, European Polymer Journal.

Cryo-mediated exfoliation and fracturing of layered materials into 2D quantum dots

P. Ajayan, Xiang Zhang, R. Vajtai, 2017, Science Advances.

Electro and Light Active Actuators Based on Reversible Shape-Memory Polymer Composites with Segregated Conductive Networks.

Chao Ding, Ming‐bo Yang, Zhengying Liu, 2019, ACS applied materials & interfaces.

A Facile and Rapid Approach to Lotus‐Seedpod‐Structured Electronic Skin for Monitoring Diverse Physical Stimuli

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Advanced Materials Technologies.

Highly sensitive pressure sensor with broad linearity via constructing a hollow structure in polyaniline/polydimethylsiloxane composite

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021 .

Mass Production of Calendering-Compatible Sulfur-Rich Secondary Particles via Hail-Inspired Nanostorm Technology for Advanced Metal-Sulfur Batteries

YU Peng, Xuewei Fu, Wei Yang, 2020 .

Shear field in the mold cavity of multimelt multi‐injection molding revealed by the morphology distribution of a model polymer blend

Jingshen Wu, Chao-liang Zhang, Ming‐bo Yang, 2014 .

Preparation of functionalized cellulose nanoparticles and their effect on the crystallization behaviors of poly(l -lactide) based nanocomposites

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Polymer International.

Highly anisotropic functional conductors fabricated by multi-melt multi-injection molding (M3IM): A synergetic role of multiple melt flows and confined interface

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Composites Science and Technology.

Morphological Evolution of Polystyrene/Polyethylene Blend Induced by Strong Second Melt Penetration

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2016 .

Template‐Free Self‐Caging Nanochemistry for Large‐Scale Synthesis of Sulfonated‐Graphene@Sulfur Nanocage for Long‐Life Lithium‐Sulfur Batteries

YU Peng, Zaiping Guo, Wei Yang, 2021, Advanced Functional Materials.

New understanding for the formation of conductive network in the nanocomposites during the crystallization of matrix

Ming‐bo Yang, Zhengying Liu, Shaodi Zheng, 2016, Journal of Polymer Research.

Electrically insulating POE/BN elastomeric composites with high through-plane thermal conductivity fabricated by two-roll milling and hot compression

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2018, Advanced Composites and Hybrid Materials.

Role of carbon nanotube grafted poly(l-lactide)-block-poly(d-lactide) in the crystallization of poly(l-lactic acid)/poly(d-lactic acid) blends: Suppressed homocrystallization and enhanced stereocomplex crystallization

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2016 .

High efficiency electrochemical reduction of CO2 beyond the two-electron transfer pathway on grain boundary rich ultra-small SnO2 nanoparticles

P. Ajayan, R. Vajtai, Shi-ze Yang, 2018 .

Preparation and characterization of isotactic polypropylene/high‐density polyethylene/carbon black conductive films with strain‐sensing behavior

Shilin Huang, Wei Yang, Ming‐bo Yang, 2014 .

Superior thermal interface materials for thermal management

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2019, Composites Communications.

Tunable reversible deformation of semicrystalline polymer networks based on temperature memory effect

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2021, Polymer.

Multi-functional carbon integrated rGO-Fe3O4@C composites as porous building blocks to construct anode with high cell capacity and high areal capacity for lithium ion batteries

Wei Yang, Ming‐bo Yang, Rui‐Ying Bao, 2019, Journal of Electroanalytical Chemistry.

Polycarbonate/liquid crystalline polymer blend: Crystallization of polycarbonate

Wei Yang, Ming‐bo Yang, B. Yin, 2006 .

A bridge-arched and layer-structured hollow melamine foam/reduced graphene oxide composite with an enlarged evaporation area and superior thermal insulation for high-performance solar steam generation

Wei Yang, Ming‐bo Yang, Zhengying Liu, 2020 .