Wang Guo-dong

发表

Ultra Fast Cooling System for the Products of Hot Flat Rolling

Wang Guo-dong, 2004 .

Self-Learning of Gauge Control Model for Plate Rolling

Wang Guo-dong, 2006 .

Regress and optimization of heat transfer parameter model in laminar cooling system

Wang Guo-dong, 2006 .

Research on temperature model for a finishing mill group in hot rolling

Wang Guo-dong, 2006 .

On the Direct Contact Between Work Roll Surfaces Outside Workpiece Width During Thin Strip Cold Rolling

Wang Guo-dong, 2008 .

Piecewise Micro Tracking Control of Finishing Temperature During Continuous Strip Hot Rolling

Wang Guo-dong, 2006 .

Camera mathematic model of the molten steel level detection in the strip casting process

Wang Guo-dong, Wang Kun, Li Jia-dong, 2013, Proceedings 2013 International Conference on Mechatronic Sciences, Electric Engineering and Computer (MEC).

The Application of Light-sectioning Method in Image's Outline Extraction

Wang Guo-dong, 2003 .

Control method of hot strip shape by changes of reduction distribution

Wang Guo-dong, 2010 .

Control Method of Cooling Rate in Advanced Cooling System for Plate Mill

Wang Guo-dong, 2012 .

Backup Roll Profile Design for 2500 mm Plate Finishing Mill

Wang Guo-dong, 2006 .

Controlling Strategies for Laminar Cooling of Hot Rolled Steel Strip

Wang Guo-dong, 2005 .

WAVELET TRANSFORM AND ITS APPLICATION IN ROLL ECCENTRICITY

Wang Guo-dong, 2005 .

Monitoring System Design for Pulverized Coal Concentration

Wang Guo-dong, 2011 .

Progress of runout table cooling technology in hot strip mill

Wang Guo-dong, 2007 .

Development of a New Generation TMCP Technology

Wang Guo-dong, 2012 .

Temperature Model of Hot Strip Finishing Mills in Tandem and Its Self-Learning Strategy

Wang Guo-dong, Wang Guo-dong, 2009 .

Establishment and Application of Water Pressure Regulating Strategy for Ultra Fast Cooling System with Compensations and Multiplexed Control

Wang Guo-dong, 2013 .

The Parametric Design of Infrared Optical Thermal Equipment Based on Pro/E

Wang Guo-dong, 2010 .

Application of Rolling Force Learning Mathematic Model for Plate Mill

Wang Guo-dong, 2009 .

Research on dynamic control model for secondary cooling zone of billet caster

Wang Guo-dong, 2005 .

Influencing factors on finishing temperature of plate rolling

Wang Guo-dong, 2008 .

Development and Application of Roller Quenching Process for XGCF62 Plate

Wang Guo-dong, 2011 .

Development and application of a measured flatness value processing method

Wang Guo-dong, 2009 .

Internal Flow Field Simulation of Screw Centrifugal Pump with Double Blades

Wang Guo-dong, 2009 .

3D Model Creating of the Roto-Jet Pump Based on Pro/E

Wang Guo-dong, 2008 .

Modified rolling force model of hot strip mill applied for ferritic warm rolling

Wang Guo-dong, 2000 .

Relationships between Tomato Maturity and Dielectric Parameters

Wang Guo-dong, 2008 .

Production Situation and Development Trend of the Hot-rolled Dual Phase Steel for Automobile Structure

Wang Guo-dong, 2012 .

New Progress of TMCP Technology -Flexible On-line Heat Treatment Process and Equipment

Wang Guo-dong, 2010 .

Application of Last Pass Force Lock-On Method to Rolling Schedule Calculation of Medium Plate

Wang Guo-dong, 2011 .

Development and Application of Ultra Fast Cooling System in Plate Mill

Wang Guo-dong, 2013 .

Cooling Temperature Control of Hot Rolled Steel Strip and Its Self-learning

Wang Guo-dong, 2010 .

Application of Ultra-fast Cooling Process on Q550 Construction and Machinery Steel Production in Angang

Wang Guo-dong, 2011 .

Research of Finishing Temperature Setup Strategy for Hot Strip Mill

Wang Guo-dong, 2007 .

Implementation of Rapid Heating for Metal Materials

Wang Guo-dong, Wang Guo-dong, 2004 .

Application of the Measures to Improve the Cooling Uniformity of Ultra-Fast Cooling for Plate Mill

Wang Guo-dong, 2012 .

Flow Regulation Technology of Ultra Fast Cooling System in Medium and Heavy Plate

Wang Guo-dong, 2012 .

Design of Dust Contents Online Detector Based on Charge Induction Principle

Wang Guo-dong, 2011 .

Technological Design of New Type Pilot Cold Rolling Mill

Wang Guo-dong, 2007 .

DESIGN OF A STRIP SHAPE MEASURING AND CONTROL SYSTEMFOR TANDEM COLD ROLLING MILL

Wang Guo-dong, 1997 .

Development of ultra fast cooling technology

Wang Guo-dong, 2004 .

Cause Analysis and Treatment on the Conductor Broken Failure of HV Electric Motor Rotor of Ash Ejector of Boiler

Wang Guo-dong, 2004 .

Design and Implication of a System of Measuring Oil Volume of Underground Tank

Wang Guo-dong, 2007 .

Improvement of hydraulic circuit of roll balance system

Wang Guo-dong, 2004 .

Mathematical model for hot rolled strip temperature control and its intelligent feedback control

Wang Guo-dong, 2011 .

Software Development for Calculating Strip Crown Effect Rate in Hot Strip Mill

Wang Guo-dong, 2006 .

New Generation TMCP for Plate Mill Based on Ultra-Fast Cooling Technology

Wang Guo-dong, 2013 .

Prediction of Heat-Flow Density for Hot-Rolled Strip Based on Artificial Neural Networks

Wang Guo-dong, 2004 .

Development and Application of New Generation TMCP for Hot Rolled Strip

Wang Guo-dong, 2013 .

New Generation TMCP and Innovative Hot Rolling Process

Wang Guo-dong, 2009 .

Cause Analysis and Improvement Measures for Width Deviation at Head and Tail of Hot Rolled Thin Strip

Wang Guo-dong, 2013 .

PID Control and Optimization of Infrared Heating Furnace

Wang Guo-dong, 2004 .

Influencing Factors on Finishing Temperature of Strip During Continuous Hot Rolling

Wang Guo-dong, 2006 .

Cooling Process Control of Rolled Plate

Wang Guo-dong, 2005 .

Study on Continuous Annealing Simulator of Cold Rolled Strip and Development of Control System

Wang Guo-dong, 2009 .

Ultra-fast Cooling Control System for Hot Rolling Strip

Wang Guo-dong, 2012 .

Influence of VVT on Engine Fuel Economy under Low Speed and Low Load

Hou Xianju, Wang Guo-dong, 2013 .

Automatic Control System of Direct Tension-type Pilot Cold Rolling Mill

Wang Guo-dong, 2012 .

Speed Setting Model for Driving System of Plate Mill

Wang Guo-dong, 2010 .

Theory and Practice of Hot Ribbed Bar Production for III,IV Class With New TMCP

Wang Guo-dong, 2009 .

A Simulation Software for Forecasting Finish Rolling Temperature for Hot Strip Mill

Wang Guo-dong, 2007 .

Industrial Applications of Direct Quenching Technology in Medium Plate Production

Wang Guo-dong, 2010 .

Precise Imaging Processing for Spaceborne Spotlight SAR

Wang Guo-dong, Zhou Yinqing, Li Chunsheng, 2002 .

Flow Auto-Calibrating Technology of Ultra Fast Cooling System in Plate Mill

Wang Guo-dong, 2012 .

Research on Optimizing Control Strategy of Temperature for Laminar Cooling during Hot Strip Mills

Wang Guo-dong, 2010 .

Discussion on laminar cooling coiling temperature control techniques of strip

Wang Guo-dong, 2004 .

Water pollution analysis of drinking water source in urban district of Yan'an with method of improved Euclidean cluster

Wang Guo-dong, 2008 .

Three-dimensional thermo-mechanical finite element simulation of the vertical–horizontal rolling process

Paulo A.F. Martins, Xiong Shangwu, Wang Guo-dong, 2001 .

ORTHOGONAL POLYNOMIAL DECOMPOSITION MODEL FOR THE FLATNESS OF COLD-ROLLED STRIP

Wang Guo-dong, Wang Guo-dong, 1997 .

Analysis of Spaceborne Spotlight SAR Antenna Beam Point Steering

Wang Guo-dong, Zhou Yinqing, Li Chunsheng, 2003 .

Microstructure and Properties of Stainless Steel Clad Plate by Vacuum Rolling Cladding

Wang Guo-dong, Wang Guo-dong, 2011 .

3-D rigid-plastic FEM analysis of the rolling of a strip with local residual deformation

Xiong Shangwu, Wang Guo-dong, Zhang Qiang, 1998 .

The FEM analysis for the effect of intermesh to plate leveling deformation

Zhou Cun-long, Wang Guo-dong, Liu Xiang-hua, 2006 .

Theory and experimental research on the process of rolling shape slab

Wang Guo-dong, Liu Xiang-hua, Jianzhong Xu, 2002 .

Continuous Annealing Technology for Hot-dip Galvanization in China

Wang Guo-dong, 2004 .