Y. Sugawara

发表

Formation of Pt Skin Layer on Ordered and Disordered Pt-Co Alloys and Corrosion Resistance in Sulfuric Acid

I. Muto, N. Hara, Yu Sugawara, 2018, Electrocatalysis.

Beneficial Role of Retained Austenite in Pitting Corrosion Resistance of Fe-C-Si-Mn Steel in Chloride Environments

I. Muto, N. Hara, Yu Sugawara, 2022, Corrosion Science.

Pit Initiation Mechanism at MnS Inclusions in Stainless Steel: Synergistic Effect of Elemental Sulfur and Chloride Ions

I. Muto, N. Hara, Yu Sugawara, 2013 .

Pit initiation on sensitized Type 304 stainless steel under applied stress: Correlation of stress, Cr-depletion, and inclusion dissolution

I. Muto, N. Hara, Yu Sugawara, 2020 .

The Role of Oxide Films on TiS and Ti4C2S2 Inclusions in the Pitting Corrosion Resistance of Stainless Steels

I. Muto, N. Hara, Yu Sugawara, 2013 .

Pitting at inclusions of the equiatomic CoCrFeMnNi alloy and improving corrosion resistance by potentiodynamic polarization in H2SO4

I. Muto, Yu Sugawara, L. Pao, 2021 .

Local Electrochemistry and In Situ Microscopy of Pitting at Sensitized Grain Boundary of Type 304 Stainless Steel in NaCl Solution

I. Muto, N. Hara, Yu Sugawara, 2017 .

Effect of anodizing on galvanic corrosion resistance of Al coupled to Fe or type 430 stainless steel in diluted synthetic seawater

I. Muto, Yu Sugawara, Takumi Kosaba, 2021 .

R-spondin1 plays an essential role in ovarian development through positively regulating Wnt-4 signaling.

K. Tomizuka, M. Kakitani, T. Oshima, 2008, Human molecular genetics.

Effect of Impurity Elements on Localized Corrosion of Zirconium in Chloride Containing Environment

Y. Tsutsumi, T. Hanawa, Shigeyuki Nakano, 2020 .

Pitting at the δ/γ Boundary of Type 304 Stainless Steel in NaCl Solution: The Role of Oxide Inclusions and Segregation

I. Muto, N. Hara, Yu Sugawara, 2017 .

Effect of quenching in aqueous polyvinylpyrrolidone solutions on the microstructure and pitting corrosion resistance of AISI 1045 carbon steel

T. Doi, I. Muto, Yu Sugawara, 2022, Materials and Corrosion.

Improving Pitting Corrosion Resistance at Inclusions and Ductility of a Martensitic Medium-Carbon Steel: Effectiveness of Short-Time Tempering

T. Doi, I. Muto, N. Hara, 2018 .

Dealloying behavior of amorphous binary Ti–Cu alloys in hydrofluoric acid solutions at various temperatures

I. Muto, N. Hara, S. Yamaura, 2013 .

Nanoporous Copper Dealloyed from a Nanocrystallized Ticu Alloy

I. Muto, N. Hara, Yu Sugawara, 2013 .

Fabrication of nanoporous copper by dealloying amorphous binary Ti–Cu alloys in hydrofluoric acid solutions

I. Muto, N. Hara, Yu Sugawara, 2012 .

Roles of Interstitial Nitrogen, Carbon, and Boron in Steel Corrosion: Generation of Oxyanions and Stabilization of Electronic Structure

G. Frankel, A. Saengdeejing, T. Doi, 2020 .

Visualization of pH and pCl Distributions: Initiation and Propagation Criteria for Crevice Corrosion of Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2012 .

Artificial MnS Inclusions in Stainless Steel: Fabrication by Spark Plasma Sintering and Corrosion Evaluation by Microelectrochemical Measurements

I. Muto, N. Hara, M. Nishimoto, 2020, ISIJ International.

Nanoporous palladium fabricated from an amorphous Pd42.5Cu30Ni7.5P20 precursor and its ethanol electro-oxidation performance

A. Makino, T. Wada, I. Muto, 2013 .

NH4+ Generation: The Role of NO3− in the Crevice Corrosion Repassivation of Type 316L Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2019, Journal of The Electrochemical Society.

Corrosion-Resistant Sintered Stainless Steels with Non-Equilibrium Mo-Rich Phases

I. Muto, Yu Sugawara, Haruka Saito, 2022, SSRN Electronic Journal.

Morphological Characteristics of Trenching around MnS Inclusions in Type 316 Stainless Steel: The Role of Molybdenum in Pitting Corrosion Resistance

I. Muto, N. Hara, Yu Sugawara, 2019, Journal of The Electrochemical Society.

Micro-electrochemical insights into pit initiation site on aged UNS S32750 super duplex stainless steel

I. Muto, M. Nishimoto, Yuya Takara, 2023, npj Materials Degradation.

Effect of Applied Stress on Pitting Corrosion Behavior of Type 304 Stainless Steel in Chloride Environment

I. Muto, N. Hara, Shimpei Tokuda, 2017 .

The role of applied stress in the anodic dissolution of sulfide inclusions and pit initiation of stainless steels

I. Muto, N. Hara, Yu Sugawara, 2021 .

Direct Observation of Pit Initiation Process on Type 304 Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2014 .

In situ monitoring of crevice corrosion morphology of Type 316L stainless steel and repassivation behavior induced by sulfate ions

I. Muto, N. Hara, Yu Sugawara, 2017 .

Micro-Electrochemical Properties of CeS Inclusions in Stainless Steel and Inhibiting Effects of Ce3+ Ions on Pitting

I. Muto, N. Hara, Yu Sugawara, 2017 .

First-Principles Investigation on Work Function of Martensitic Carbon Steels: Effect of Interstitial Carbon on Anodic Dissolution Resistance

A. Saengdeejing, T. Doi, I. Muto, 2021 .

Effects of the initial microstructure of Ti–Cu alloys on final nanoporous copper via dealloying

I. Muto, N. Hara, Yu Sugawara, 2013 .

Effect of atmospheric aging on dissolution of MnS inclusions and pitting initiation process in type 304 stainless steel

Yu Sugawara, Izumi Muto, Nobuyoshi Hara, 2016 .

Electrochemical Passivation for Sm2Fe17N3 Magnetic Powders in Non-Aqueous Solvents

I. Muto, N. Hara, Yu Sugawara, 2017 .

Morphological Change and Open-circuit Potential of Single Metastable Pit on AA1050 Aluminum in NaCl Solution

I. Muto, N. Hara, Yu Sugawara, 2021 .

Role of Cu in Corrosion Resistance of Cocrcufeni Medium-Entropy Alloys: Importance of Compositional Change and Thickening of Oxide Films

I. Muto, Yu Sugawara, Masaru Kato, 2023, SSRN Electronic Journal.

Fabrication of nanoporous copper by dealloying of amorphous Ti–Cu–Ag alloys

A. Makino, I. Muto, N. Hara, 2014 .

Smart Nanofiber Mesh with Locally Sustained Drug Release Enabled Synergistic Combination Therapy for Glioblastoma

H. Sakurai, Y. Matsumoto, M. Ebara, 2023, Nanomaterials.

Image correction method for the chemical imaging sensor

Michael J. Schöning, Ko-ichiro Miyamoto, Torsten Wagner, 2010 .

Nickel-stabilized nanoporous copper fabricated from ternary TiCuNi amorphous alloys

A. Makino, I. Muto, N. Hara, 2013 .

Sudden pH and Cl− Concentration Changes during the Crevice Corrosion of Type 430 Stainless Steel

I. Muto, M. Nishimoto, K. Matsumura, 2022, Journal of The Electrochemical Society.

Simultaneous visualization of pH and Cl− distributions inside the crevice of stainless steel

I. Muto, N. Hara, Yu Sugawara, 2016 .

Challenges and Prospects in Corrosion Science and Technology

I. Muto, N. Hara, Y. Sugawara, 2017 .

Micro-electrochemical investigation on the role of Mg in sacrificial corrosion protection of 55mass%Al-Zn-Mg coated steel

M. Matsumoto, I. Muto, N. Hara, 2017 .

Effect of Phosphate and Chromate Pigments on Sacrificial Corrosion Protection by Al–Zn Coating and Delamination Mechanism of Pre-painted Galvalume Steel

M. Matsumoto, I. Muto, N. Hara, 2016 .

Improvement of Pitting Corrosion Resistance of Type 316L Stainless Steel by Potentiostatic Removal of Surface MnS Inclusions

I. Muto, N. Hara, Koichi Hirabayashi, 2012 .

Anodic Polarization Characteristics and Electrochemical Properties of Fe3C in Chloride Solutions

T. Doi, I. Muto, N. Hara, 2019, Journal of The Electrochemical Society.

Pitting Corrosion Resistance of Martensite of AISI 1045 Steel and the Beneficial Role of Interstitial Carbon

T. Doi, I. Muto, N. Hara, 2017 .

Real-Time Microelectrochemical Observations of Very Early Stage Pitting on Ferrite-Pearlite Steel in Chloride Solutions

T. Doi, I. Muto, N. Hara, 2017 .

Bimodal nanoporous nickel prepared by dealloying Ni38Mn62 alloys

I. Muto, N. Hara, Yu Sugawara, 2012 .

Fabrication of Ultrafine Nanoporous Copper by the Minor Addition of Gold

I. Muto, N. Hara, Yu Sugawara, 2012 .

Elaboration of nanoporous copper by modifying surface diffusivity by the minor addition of gold

I. Muto, N. Hara, Yu Sugawara, 2013 .

Dependency of the formation of Au-stabilized nanoporous copper on the dealloying temperature

I. Muto, N. Hara, Yu Sugawara, 2014 .

Dealloying Behaviours of an Equiatomic TiCu Alloy

I. Muto, N. Hara, Yu Sugawara, 2013 .

Mechanism for the Morphological Change from Trenching to Pitting around Intermetallic Particles in AA1050 Aluminum

I. Muto, N. Hara, Yu Sugawara, 2019, Journal of The Electrochemical Society.

AMSH, an ESCRT-III associated enzyme, deubiquitinates cargo on MVB/late endosomes.

N. Tanaka, Masanao Kyuuma, K. Sugamura, 2007, Cell structure and function.

Roles of Alloying Elements in the Corrosion Resistance of Equiatomic CoCrFeMnNi High-Entropy Alloy and Application to Corrosion-Resistant Alloy Design

I. Muto, M. Nishimoto, Y. Sugawara, 2021, MATERIALS TRANSACTIONS.

Real-time in situ observation of the corrosion process of die-cast AZ91D magnesium alloy in NaCl solutions under galvanostatic polarization

I. Muto, Yu Sugawara, M. Nishimoto, 2021, Corrosion Science.

Effect of Sensitization on Pitting Corrosion at MnS and CrS in Type 304 Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2021, Journal of The Electrochemical Society.

A Methodology for Fabrication of Highly Pitting Corrosion-Resistant Type 304 Stainless Steel by Plasma Carburizing and Post-Pickling Treatment

I. Muto, N. Hara, Yu Sugawara, 2018 .

Relationships between Pitting Corrosion Potentials and MnS Dissolution of 5–18 Mass% Cr Steels

I. Muto, N. Hara, Yu Sugawara, 2018 .

Effects of Corrosion and Cracking of Sulfide Inclusions on Pit Initiation in Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2014 .

A Microelectrochemical System for In Situ High-Resolution Optical Microscopy: Morphological Characteristics of Pitting at MnS Inclusion in Stainless Steel

I. Muto, N. Hara, Yu Sugawara, 2012 .

Dissolution of Platinum Single Crystal Surfaces under Potential Cycling in Sulfuric Acid Solution

I. Muto, N. Hara, M. Sasaki, 2014 .

Chemical Conversion Treatment of AA5083 Aluminum Alloy and AISI 1045 Carbon Steel under Galvanically Coupled Condition in Na2MoO4: Effect of pH on Corrosion Resistance

I. Muto, Yu Sugawara, M. Nishimoto, 2022, MATERIALS TRANSACTIONS.

First-principles analysis of the inhibitive effect of interstitial carbon on an active dissolution of martensitic steel

H. Miura, A. Saengdeejing, T. Doi, 2020 .

Microelectrochemical Aspects of Interstitial Carbon in Type 304 Stainless Steel: Improving Pitting Resistance at MnS Inclusion

S. Shibukawa, T. Doi, I. Muto, 2015 .

Detection of Hydrogen Distribution in Pure Iron Using WO3 Thin Film

A. Shibata, I. Muto, N. Hara, 2018, ISIJ International.

Fabrication of a model specimen for understanding micro-galvanic corrosion at the boundary of α-Mg and β-Mg17Al12

I. Muto, Yu Sugawara, M. Nishimoto, 2022, Journal of Magnesium and Alloys.

Effect of Applied Stress On Dissolution Morphology and Pit Initiation Behavior of Mns Inclusion in Stainless Steel

I. Muto, N. Hara, Naoya Shimahashi, 2014 .

Effectiveness of an intercritical heat-treatment on localized corrosion resistance at the microstructural boundaries of medium-carbon steels

I. Muto, N. Hara, Yu Sugawara, 2019, Corrosion Science.

Electron microscopic study on residual defects of Al+ or B+ implanted 4H-SiC

T. Yatsuo, H. Onose, T. Ohno, 1999 .

Cerium addition to CaS inclusions in stainless steel: Insolubilizing water-soluble inclusions and improving pitting corrosion resistance

I. Muto, N. Hara, Yu Sugawara, 2021 .

Microelectrochemical Study on the Surface Oxidation of Pt: The Effects of Crystal Orientation and Grain Boundary

I. Muto, N. Hara, Yu Sugawara, 2014 .

Corrosion Resistance of a Free-Cutting Soft-Magnetic Stainless Steel in Pure Water

I. Muto, N. Hara, Yu Sugawara, 2015 .