Y. Saito

发表

Effect of intermediate rolling condition on the critical current density of silver-sheathed Bi(2223) superconducting tapes

T. Sakai, H. Utsunomiya, Y. Saito, 1997 .

Deformation and Recrystallization Behavior of Low Carbon Steel in High Speed Hot Rolling

T. Sakai, K. Hirano, Y. Saito, 1988 .

Deformation microstructure and nucleation of recrystallization in hot-deformed single crystals of 18% Cr ferritic steel

N. Tsuji, M. Muraki, Y. Saito, 1998 .

Deformation and Recrystallization Behavior of Austenitic Stainless Steel in High Speed Hot Rolling

T. Sakai, Y. Saito, K. Kato, 1986 .

Effect of Strain on Microstructures and Mechanical Properties of ARB Processed and Annealed Ultra-low Carbon IF Steel

N. Tsuji, N. Kamikawa, Y. Saito, 2003 .

Ausformed Bainite in SUP7 Spring Steel

N. Tsuji, Michihiko Ayada, Y. Saito, 1999 .

Superplasticity of Ultra-Fine Grained Al-Mg Alloy Produced by Accumulative Roll-Bonding

N. Tsuji, Y. Saito, K. Shiotsuki, 1999 .

Ultra-Fine Grains in Ultra Low Carbon IF Steel Highly Strained by ARB

N. Tsuji, R. Ueji, Y. Saito, 2000 .

Change in Microstructure and Mechanical Properties of Ultra-Fine Grained Aluminum during Annealing

N. Tsuji, T. Sakai, H. Utsunomiya, 2000 .

Inhomogeneous Texture Formation in High Speed Hot Rolling of Ferritic Stainless Steel

T. Sakai, K. Kawasaki, M. Matsuo, 1991 .

Occurrence of Dynamic Recrystallization in Ferritic Iron

N. Tsuji, T. Maki, Y. Matsubara, 1998 .

Recrystallization and Texture Formation in High Speed Hot Rolling of Austenitic Stainless Steel

T. Sakai, Y. Saito, K. Kato, 1987 .

Effect of Boron Addition on the Microstructure of Hot-deformed Ti-added Interstitial Free Steel

Yukihiro Matsubara, Tetsuo Sakai, Yoshihiro Saito, 1997 .

Improvement of the r-value in 5052 aluminum alloy sheets having through-thickness shear texture by 2-pass single-roll drive unidirectional shear rolling

T. Sakai, Y. Saito, Syuichi Hamada, 2001 .

Dynamic Recrystallization in 18% Cr Ferritic Steel

N. Tsuji, Y. Saito, H. Yagi, 2000 .

Microstructure and Texture of A1050 Aluminium Strips Produced by Melt Direct-Rolling Method

N. Tsuji, T. Sakai, Yuichi Nagai, 1996 .

Texture and Microstructure of Ultra-low Carbon IF Steel Strip Processed by Conshearing

T. Sakai, H. Utsunomiya, Yoshiaki Okamura, 2003 .

Ultra Grain Refinement of Commercial Purity Aluminum by a Multi-Stack ARB Process

T. Sakai, H. Utsunomiya, Yoshihiro Saito, 2003 .

Strengthening of Sheath-Rolled Aluminum Based MMC by the ARB Process

N. Tsuji, T. Sakai, H. Utsunomiya, 1999 .

Texture formation in low carbon Ti bearing steel sheets by high speed hot rolling in ferrite region.

T. Sakai, Y. Saito, K. Kato, 1988 .

Microstructures and Mechanical Properties of Ultra Low Carbon IF Steel Processed by Accumulative Roll Bonding Process

D. Shin, Kyung-Tae Park, Seong-Hee Lee, 2002 .

Fabrication and Refinement of 6061(p)/6063 Aluminum Laminate by Accumulative Roll-Bonding (ARB) Process

N. Tsuji, T. Sakai, H. Utsunomiya, 2000 .

Microstructure and Texture of Commercial Purity Aluminum Strips Produced by Melt Direct Rolling

N. Tsuji, T. Sakai, Yuichi Nagai, 1998 .

Mica/smectite mixed-layer minerals in alteration zones surrounding the Yokota Kuroko deposit, Aizu district, Northeast Japan.

Yukito Oda, Shunichi Suzuki, Y. Saito, 1990 .

Structure Analysis Technology for Amorphous Materials by Synchrotron Radiation X-ray Measurements and Molecular Dynamics Simulations

K. Yamaguchi, M. Onishi, T. Haruna, 2008 .

Production and Application of Monoclonal Antibodies to Human Selenoprotein P

Kazuhiko Takahashi, T. Honjoh, Yasuko Watanabe, 2001 .

Influence of Spread Rolling on Properties of Bismuth Based Oxide Superconducting Tapes Sheathed in Silver

T. Sakai, H. Utsunomiya, K. Higaki, 1994 .

Fabrication of a Bilayer Structure of Cu and Polyimide To Realize Circuit Microminiaturization and High Interfacial Adhesion in Flexible Electronic Devices.

Y. Kubo, A. Mizoguchi, Hirokazu Tanaka, 2018, ACS applied materials & interfaces.

Process-dependent effects of water on the chemistry of aluminum oxide and aromatic polyimide interface in composite materials

Y. Kubo, A. Mizoguchi, Hirokazu Tanaka, 2020 .

High-Energy Electron-Irradiated Fluorinated Ethylene Polypropylene Copolymer Coatings on Al Substrates for Enhanced Metal Adhesion and Protection

Yoshihiro Saito, Y. Kubo, S. Uemura, 2022, ACS Applied Nano Materials.

First-principles molecular dynamics simulation study on Ti4+ ion in aqueous sulfuric acid

H. Inoue, A. Masuno, E. Tsuchida, 2021 .

Er3+ infrared fluorescence affected by spatial distribution synchronicity of Ba2+ and Er3+ in Er3+-doped BaO–SiO2 glasses

H. Inoue, A. Masuno, Yoshihiro Saito, 2016 .

Characterization of SiNx/GaxIn1-xAs Interface using Hard X-ray Photoemission Spectroscopy

A. Kimura, K. Yamaguchi, Masashi Ito, 2007 .

Influence of Gas Flow Ratio in PE‐CVD Process on Mechanical Properties of Silicon Nitride Film

Y. Isono, A. Yamaguchi, T. Namazu, 2008 .

Structural change of Na2O-doped SiO2 glasses by melting

H. Inoue, K. Ohara, S. Kohara, 2016 .

Local structure analyses around Er(3+) in Er-doped fibers with Al co-doping.

Takahiro Murata, Masashi Onishi, Shinji Ishikawa, 2006, Optics express.

Thermal Expansion and Atomic Structure of Amorphous Silicon Nitride Thin Films

S. Nakajima, Yoshihiro Saito, T. Kagiyama, 2003 .

Atomic-scale identification of individual lanthanide dopants in optical glass fiber.

K. Yamaguchi, H. Inoue, Y. Ikuhara, 2013, ACS nano.

Novel Technique for Improving the Signal-to-Background Ratio of X-ray Absorption Near-Edge Structure Spectrum in Fluorescence Mode and Its Application to the Chemical State Analysis of Magnesium Doped in GaN

M. Ueno, T. Yonemura, J. Iihara, 2013 .

Mechanical Properties of (SiC)p/Al Composite Fabricated by Sheath Rolling

T. Sakai, Yoshihiro Saito, Seong-Hee Lee, 2000 .

Consolidation of Nitrogen Gas Atomized Aluminum Powder by Sheath Rolling

T. Sakai, Yoshihiro Saito, Seong-Hee Lee, 1998 .

Fabrication of Al/Al 2 O 3 Particle Reinforced Metal Matrix Composite by Sheath Rolling of Powder Mixture

T. Sakai, Yoshihiro Saito, Seong-Hee Lee, 1998 .

ARB (Accumulative Roll‐Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials

N. Tsuji, Y. Minamino, Seong-Hee Lee, 2003 .

Thin wide-field-of-view HMD with free-form-surface prism and applications

Kazutaka Inoguchi, Hideki Morishima, Shoichi Yamazaki, 1999, Electronic Imaging.

Accumulative Roll-Bonding of 1100 Aluminum

N. Tsuji, T. Sakai, H. Utsunomiya, 1999 .

Ultra Grain Refinement of Aluminium 1100 by ARB with Cross Rolling

T. Sakai, K. Fukuda, H. Utsunomiya, 2003 .

Development of Controlled Tapered Rolling Method for Manufacturing Tapered Leaf Spring

Michihiko Ayada, Hiroshi Utsunomiya, Yoshihiro Saito, 1999 .

Development of an elongation-controlled mill

Hiroshi Utsunomiya, Yoshihiro Saito, Masaki Shinkawa, 1998 .

Satellite-mill rolling of U-shaped and H-shaped wires

Yoshihiro Saito, Hiroshi Utsunomiya, Tatsuya Kawamoto, 1998 .

An XAFS study of the local structure of Eu3+ ions in glasses prepared by a levitation technique

H. Inoue, A. Masuno, J. Iihara, 2020, Journal of the Ceramic Society of Japan.

Proposal of a new method for the spread rolling of thin strips

Hiroshi Utsunomiya, Yoshihiro Saito, Shigemoto Matsueda, 1999 .

Critical current density of Ag-sheathed (Bi,Pb) 2223 tapes produced by various thermo-mechanical treatment patterns

T. Sakai, H. Utsunomiya, Y. Saito, 1997 .

Development of Method for Analyzing Sintering Reaction of Bi-Based Oxide Superconducting Wires Using SPring-8

Masugu Sato, K. Yamaguchi, N. Ayai, 2008 .

First-principles molecular dynamics simulation study on electrolytes for use in redox flow battery

H. Inoue, E. Tsuchida, Y. Choe, 2017 .