T. Lee

发表

Temperature dependent load partitioning and slip mode transition in a eutectic AlCoCrFeNi2.1 high entropy alloy

S. Guo, N. R. Jaladurgam, Tung Lik Lee, 2021 .

Temperature dependent load partitioning and slip mode transition in a eutectic AlCoCrFeNi2.1 high entropy alloy

S. Guo, Magnus Hörnqvist, N. R. Jaladurgam, 2021 .

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review

Bing Wang, Shuncong Zhong, Tung-Lik Lee, 2020, Advances in Mechanical Engineering.

Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

K. Fezzaa, D. Eskin, T. Connolley, 2018 .

The effects of Ta on the stress rupture properties and microstructural stability of a novel Ni-base superalloy for land-based high temperature applications

C. Xiao, Tung Lik Lee, M. Gorley, 2014 .

The interdendritic-melt solidification control (IMSC) and its effects on the porosity and phase change of a Ni-based superalloy

D. Daisenberger, C. Xiao, J. Mi, 2014 .

A novel insight into the primary creep regeneration behaviour of a polycrystalline material at high-temperature using in-situ neutron diffraction

A. Mamun, M. Mostafavi, D. Agius, 2020 .

Study of precipitation-assisted stress relaxation and creep behavior during the ageing of a nickel-iron superalloy

Hongbiao Dong, Guang Feng, Tung Lik Lee, 2019, Materials Science and Engineering: A.

Stress-Induced Variant Selection of γ″ Phase in Inconel 718 During Service: Mechanism and Effects on Mechanical Behavior

Hongbiao Dong, H. Yu, Tung Lik Lee, 2020 .

Anisotropic Behaviours of Lpbf Hastelloy X Under Slow Strain Rate Tensile Testing at Elevated Temperature

J. Moverare, R. Peng, Tung Lik Lee, 2022, SSRN Electronic Journal.

In situ neutron diffraction study of a new type of stress-induced confined martensitic transformation in Fe22Co20Ni19Cr20Mn12Al7 high-entropy alloy

Shilei Li, S. Kabra, X. Hui, 2020 .

Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates

S. Kabra, B. Ahmad, Tung Lik Lee, 2019, Surface and Coatings Technology.

3D Phase Field Modeling of Multi-Dendrites Evolution in Solidification and Validation by Synchrotron X-ray Tomography

W. Zhang, S. Xiong, Jinwu Kang, 2021, Materials.

High-Speed Synchrotron X-ray Imaging Studies of the Ultrasound Shockwave and Enhanced Flow during Metal Solidification Processes

K. Fezzaa, T. Connolley, J. Mi, 2015, Metallurgical and Materials Transactions A.

Effects of vacuum on gas content, oxide inclusions and mechanical properties of Ni-based superalloy using electron beam button and synchrotron diffraction

C. Tang, C. Xiao, M. Gorley, 2021 .

Characterization of the residual stresses in spray-formed steels using neutron diffraction

Shu Yan Zhang, P. Grant, S. Kabra, 2015 .

Ultrafast X-Ray Imaging and Modelling of Ultrasonic Cavitations in Liquid Metal

K. Fezzaa, J. Mi, J. C. Khong, 2013 .

In Situ Synchrotron X-ray Study of Ultrasound Cavitation and Its Effect on Solidification Microstructures

J. Mi, Dongyue Tan, T. Lee, 2015, Metallurgical and Materials Transactions B.

Numerical and physical simulation of rapid microstructural evolution of gas atomised Ni superalloy powders

P. Grant, Na-Wei Liu, J. Mi, 2017 .

In-situ multiscale shear failure of a bistable composite tape-spring

B. Wang, S. Guest, K. Seffen, 2020 .

In-situ neutron diffraction study of micromechanical shear failure in an aerospace composite

S. Guest, K. Seffen, B. Wang, 2020 .

Measuring Residual Strain and Stress in Thermal Spray Coatings Using Neutron Diffractometers

N. Faisal, A. Prathuru, T. L. Lee, 2021, Experimental Mechanics.

Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound

K. Fezzaa, D. Eskin, T. Connolley, 2018, Data in brief.