Xiaohu Hou

发表

Effect of the Solution Temperature on the Precipitates and Grain Evolution of IN718 Fabricated by Laser Additive Manufacturing

Yu-hao Cao, P. Bai, Fei Liu, 2020, Materials.

Experimental examination of strain field within GP zone in an Al–Zn–Mg–Cu alloy

Chunwang Zhao, P. Bai, Fei Liu, 2012 .

Microstructure and mechanical properties of a large billet of spray formed Al–Zn–Mg–Cu alloy with high Zn content

P. Bai, X. Hou, Pucun Bai, 2009 .

Investigation on the Precipitates of IN718 Alloy Fabricated by Selective Laser Melting

Yu-hao Cao, P. Bai, Fei Liu, 2019, Metals.

Experimental determination of the interface residual stresses of carbon-fiber-reinforced polymers

X. Hou, W. G. Zhang, J. Zhu, 2020 .

Effect of Strain Rate on Nano-Scale Mechanical Behavior of A-Plane (112¯0) ZnO Single Crystal by Nanoindentation

Xueping Zhao, F. Lang, Jijun Li, 2023, Micromachines.

Experimental Study on the Thickness-Dependent Hardness of SiO2 Thin Films Using Nanoindentation

Chunwang Zhao, Xiaomeng Nie, X. Hou, 2020, Coatings.

Microstructure, mechanical and tribological properties of NiAl matrix composites with addition of BaO/TiO2 binary oxides

X. Hou, Hongjian Guo, Yimin Gao, 2020 .

Optical, electrical, and structural properties of Fe-doped CuAlO2 thin films

Hui Yan, P. Bai, Fei Liu, 2019, Functional Materials Letters.

Investigation of the Coherent Strain Evolution of the η' phase in Al–Zn–Mg–Cu alloys via scanning transmission electron microscopy

P. Bai, Fei Liu, X. Hou, 2021 .

Coherent strain of Guinier-Preston II zone in an Al-Zn-Mg-Cu alloy.

P. Bai, Fei Liu, X. Hou, 2019, Micron.

Evaluation of strain fields caused by the η′ phase in an Al-Zn-Mg-Cu alloy

P. Bai, X. Hou, Xiaohu Hou, 2017 .

In-situ SEM investigation of sub-microscale deformation fields around a crack-tip in silicon

J. J. Li, Chunwang Zhao, Y. Wang, 2012 .

A novel raster-scanning method to fabricate ultra-fine cross-gratings for the generation of electron beam moiré fringe patterns

J. Zhu, F. Liu, F. Lang, 2016 .

Effect of Cr element on the microstructure and oxidation resistance of novel NiAl-based high temperature lubricating composites

Fei Liu, X. Hou, Yimin Gao, 2021, Corrosion Science.

Mechanical Property Evaluation and Prediction of Cementing Composites Blended with MK and UFA under High-Temperature Steam Curing

X. Hou, Chao Liang, Yongming Xing, 2022, Materials.

Experimental Investigation of Crack Propagation and Strain Fields Evolution around a Crack Tip in 5A05 Aluminum Alloy

Chunwang Zhao, X. Hou, F. Lang, 2018, Metals.

Optimization Effect of Metakaolin on Macro- and Micro-Mechanical Properties of Composite Cementitious Materials under Different Curing Conditions

C. Liang, Yongming Xing, Xiaohu Hou, 2022, Materials.

Grain growth in IN718 superalloy fabricated by laser additive manufacturing

Yu-hao Cao, P. Bai, Fei Liu, 2020, Materials Science and Technology.

Quantitative Measurement of Strain Field around η′ Phase in a 7000 Series Aluminum Alloy

P. Bai, Fei Liu, X. Hou, 2016 .

Precipitates and corrosion resistance of an Al–Zn–Mg–Cu–Zr plate with different percentage reduction per passes

X. Hou, Liang-ming Yan, D. Huang, 2018, Rare Metals.