A. Bandyopadhyay

发表

Evaluation of laboratory performance through interlaboratory comparison

Sanjay Yadav, S. Yadav, A. K. Bandyopadhyay, 2009 .

A Computer Controlled Precision High Pressure Measuring System

S. Yadav, A. Bandyopadhyay, S. Yadav, 2011 .

Least squares best fit line method for the evaluation of measurement uncertainty with electromechanical transducers (EMT) with Electrical Outputs (EO)

V. K. Gupta, Sanjay Yadav, A. K. Bandyopadhyay, 2010 .

Studies on the Stability of the Industrial Pressure Balances for Hydrostatic Pressure Measurement up to 100 MPa

V. K. Gupta, Sanjay Yadav, A. K. Bandyopadhyay, 2013 .

Standardisation of pressure measurement using pressure balance as transfer standard

V. K. Gupta, Sanjay Yadav, V. Gupta, 2011 .

Computer simulation of a 1.0 GPa piston–cylinder assembly using finite element analysis (FEA)

Sanjay Yadav, A. K. Bandyopadhyay, Sugandha Dogra, 2010 .

Standardization of pressure calibration (7-70 MPa) using digital pressure calibrator

V. K. Gupta, Sanjay Yadav, A. K. Bandyopadhyay, 2010 .

Investigations on Measurement Uncertainty and Stability of Pressure Dial Gauges and Transducers

Sanjay Yadav, V. Gupta, S. Yadav, 2010 .

Assessment of Laboratory Performance in External Proficiency Testing in the Pressure Range up to 60 MPa

S. Yadav, A. Bandyopadhyay, 2009 .

Evaluation of Interlaboratory Performance through Proficiency Testing using Pressure Dial Gauge in the Hydraulic Pressure Measurement up to 70 MPa

Sanjay Yadav, S. Yadav, V. Gupta, 2008 .

The effect of pressure-transmitting fluids in the characterization of a controlled clearance piston gauge up to 1 GPa

V. K. Gupta, Sanjay Yadav, V. Gupta, 2007 .

Characterization of a compact 200 MPa controlled clearance piston gauge as a primary pressure standard using the Heydemann and Welch method

D. Olson, A. K. Bandyopadhyay, A. Bandyopadhyay, 2006 .

Studies on the stabilities of various types of industrial pressure measuring devices

V. K. Gupta, Sanjay Yadav, V. Gupta, 2006 .

Current Status of Pressure Standards at NPLI and Our Experiences with the Key Comparison Data Base (KCDB)

Sanjay Yadav, A. K. Bandyopadhyay, Nita Dilawar, 2006 .

Proficiency testing (PT) program under NABL in the pressure range 7-70 MPa using digital pressure calibrator (DPC)

S. Yadav, A. K. Bandyopadhyay, S. Yadav, 2005 .

Evaluation of Associated Uncertainties in Calibration of Direct Pressure Indicating Electromechanical Devices

A. K. Bandyopadhyay, Sanjay Yadav, O. Prakash, 2005 .

Intercomparison of National Hydraulic Pressure Standards up to 500 MPa

Sanjay Yadav, Ajay Gupta, A. K. Bandyopadhyay, 2002 .

Bilateral Comparison between NIST (USA) and NPLI (India) in the Hydraulic Pressure Region 40 MPa to 200 Mpa | NIST

S. Yadav, D. Olson, A. Bandyopadhyay, 2006 .

Studies on the Stability of the Industrial Pressure Balances for Hydrostatic Pressure Measurement up to 100 MPa

V. Gupta, S. Yadav, A. Bandyopadhyay, 2013, Journal of The Institution of Engineers (India): Series C.

Proficiency testing through interlaboratory comparison in the pressure range up to 70 MPa using pressure dial gauge as an artifact

V. K. Gupta, Sanjay Yadav, Om Prakash, 2005 .

Report of the Proficiency Testing in the Pneumatic Pressure Region up to 5 MPa

Jasveer Singh, Nita Dilawar Sharma, A. Bandyopadhyay, 2014, MAPAN.

Establishing a Continuous Chain of Traceability for Pressure Measurements up to 40 MPa

Jasveer Singh, Nita Dilawar Sharma, Jasveer Singh, 2013 .

Assigning RF/DC Transfer Difference to High Frequency Voltage Primary Standard up to 1 GHz at NPLI

P. S. Negi, A. Bandyopadhyay, S. Ahmad, 2013, MAPAN.

Global Water Flow Measurement and Calibration Facilities: Review of Methods and Instrumentations

Sanjay Yadav, Ravinder Agarwal, A. K. Bandyopadhyay, 2012 .

Global Water Flow Measurement and Calibration Facilities: Review of Methods and Instrumentations

S. Yadav, S. Jaiswal, Ravinder Agarwal, 2012, MAPAN.