Toshiyuki Obikawa

发表

Chatter suppression effects of tools with restricted tool-chip contact length (Part 2). Improvement of stability threshold for regenerative chatter of tool system with two degrees of freedom.

Jin Wu, Toshiyuki Obikawa, Eiji Usui, 1991 .

Turning of Inconel 718 using inserts with cooling channels under high pressure jet coolant assistance

Toshiyuki Obikawa, Zhenglong Fang, Z. Fang, 2017 .

Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference | NIST

Michael T. Postek, Ranga Komanduri, Yuebin Guo, 2010 .

On the Publication of a Special Issue on the Functions of Film, Membrane, and Film-Like Materials and Structures

Toshiyuki Obikawa, 1999 .

On the Development of Expert System for Selecting the Optimum Cutting Conditions. 2nd Report. Subsystems for Evaluating Dimensional Accuracy and Surface Roughness.

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1991 .

Simulation Analysis of Hyper Velocity Machining

Toshiyuki Obikawa, Jun Shinozuka, 1999 .

Monitoring of Tool Wear States in Turning Based on Wavelet Analysis

Weiguo Gong, Toshiyuki Obikawa, Takahiro Shirakashi, 1997 .

The analytical prediction of residual stress within machined sublayer and its effect on accuracy

Toshiyuki Obikawa, Hiroyuki Sasahara, T. Shirakashi, 1994 .

Autonomous turning operation planning with adaptive prediction of tool wear and surface roughness

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1993 .

Basic Nonlinearity of Tool Chatter Vibration(Advanced machining technology)

Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi, 2005 .

On the Development of Expert System for Selecting the Optimum Cutting Conditions. (3rd Report). Acquisition System of Fracture Characteristics.

Toshiyuki Obikawa, Eiji Usui, Masahiko Yoshino, 1992 .

Fabrication of Miniature Shell Structures of Stainless Steel Foil and Their Forming Limit in Single Point Incremental Microforming

Toshiyuki Obikawa, Tsutomu Sekine, 2013, Int. J. Autom. Technol..

Monitoring of flank wear of coated tools in high speed machining with a neural network ART2

Toshiyuki Obikawa, Jun Shinozuka, 2004 .

An active method of monitoring tool wear states by impact diagnostic excitation

Weiguo Gong, Toshiyuki Obikawa, Takahiro Shirakashi, 2004 .

Optimal Design of a Damped Arbor for Heavy-Duty Machining of Giant Parts

Toshiyuki Obikawa, Koji Utsumi, Hideaki Onozuka, 2013 .

An Adaptive Prediction Approach to Machining Operation. A Concept of Adaptive Prediction and Application to Evaluation of Tool Failure.

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1992 .

A Higher-Order Formula of Path Interval for Tool-Path Generation

Toshiyuki Obikawa, Tsutomu Sekine, 2011, Int. J. Autom. Technol..

Cutting Performance of Tools with Curved Rake Face

Toshiyuki Obikawa, T. Shirakashi, Jun Shinozuka, 1994 .

Development of Reaction-Controllable Milling Head and Its Cutting Performance.

Toshiyuki Obikawa, Masahiko Yoshino, Takahiro Shirakashi, 1994 .

407 Monitoring of High Speed Machining States with an Neural Network ART2

Toshiyuki Obikawa, Jun Shinozuka, H Nakamoto, 2003 .

Computer fluid dynamics analysis for efficient spraying of oil mist in finish-turning of Inconel 718

Toshiyuki Obikawa, Yuki Asano, Yasuhiro Kamata, 2009 .

Development of Orthogonal Impact Cutting Testing Machine

Toshiyuki Obikawa, Jun Shinozuka, 2005 .

MSEC 2009 state-of-art paper: Micro/nano-technology applications for manufacturing systems and processes

Toshiyuki Obikawa, David Dornfeld, Jack G. Zhou, 2009 .

Analysis of vibration behavior of damped tool arbor by finite element method

Toshiyuki Obikawa, Koji Utsumi, Ippei Kono, 2014 .

FEM analysis on three dimensional cutting: analysis on large deformation problem of tool entry

Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi, 1993 .

Tools with built-in thin film thermocouple sensors for monitoring cutting temperature

Toshiyuki Obikawa, Jun Shinozuka, Ali Basti, 2007 .

Study on edge fracture of abrasive grain during grinding with applying the theory of Markov process. II: Fracture characteristics as Markov process

Toshiyuki Obikawa, Eiji Usui, Shinsaku Hagiwara, 1994 .

Establishing a Novel Model for 5-Axis Milling with a Filleted End Mill

Toshiyuki Obikawa, Michihiko Hoshino, Tsutomu Sekine, 2012 .

On the Development of Expert System for Selecting the Optimum Cutting Conditions (1st Report)

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1990 .

Tool wear monitoring for optimizing cutting conditions

Toshiyuki Obikawa, Takashi Matsumura, T. Shirakashi, 1996 .

Prediction of Grinding States Based on Dressing Sounds. Approaches by Linear Prediction Method and Neural Network.

Toshiyuki Obikawa, Akinori Yui, Takashi Matsumura, 2001 .

Cutter/Work Interference and Surface Generation in Ball End Milling

Toshiyuki Obikawa, Tetsuri Senoda, 2011 .

Micro-liter lubrication machining of Inconel 718

Toshiyuki Obikawa, Yuki Asano, Andrew Otieno, 2008 .

Development of cutting simulator for end milling

Toshiyuki Obikawa, Kazuyuki Sasajima, Jun Shinozuka, 2004 .

508 Establishing a Novel Model for 5-axis Milling with a Filleted End-mill

Toshiyuki Obikawa, Michihiko Hoshino, Tsutomu Sekine, 2011 .

Application of computational machining method to discontinuous chip formation

Toshiyuki Obikawa, Eiji Usui, Hiroyuki Sasahara, 1997 .

Foreword( Advanced Manufacturing Technology [I])

Toshiyuki Obikawa, Nobuhiro Sugimura, Noboru Morita, 2006 .

Finite Element Approach to Chip Breaker.

Toshiyuki Obikawa, Eiji Usui, Hiroyuki Sasahara, 1992 .

Single Point Micro Incremental Forming of Miniature Shell Structures

Toshiyuki Obikawa, Tsutomu Sekine, T. Obikawa, 2009 .

Chip breaking analysis from the viewpoint of the optimum cutting tool geometry design

Toshiyuki Obikawa, Jun Shinozuka, T. Shirakashi, 1996 .

Autonomous Operation Planning of Machining Processes. An Adaptive Prediction with Integration of Metal Cutting Theory and Neural Network.

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1993 .

On the art of eco-machining

Toshiyuki Obikawa, 2010 .

Recent Progress of Computer Aided Simulation of Chip Flow and Tool Damage in Metal Machining

Toshiyuki Obikawa, T. Shirakashi, Katsuhiro Maekawa, 1996 .

Machining of Tapered Holes by Contouring with Slender Ball End Mills

Toshiyuki Obikawa, Ippei Kono, Hideaki Onozuka, 2012 .

Machine Parts Manufacturing by Sheet Steel Lamination Technology

Toshiyuki Obikawa, Masahiko Yoshino, Jun Shinozuka, 2002 .

Computational Fluid Dynamic Analysis of Coolant Flow in Turning

Masashi Yamaguchi, Toshiyuki Obikawa, T. Obikawa, 2013 .

High Speed Machining: A Review from a Viewpoint of Chip Formation

Masahiro Anzai, Toshiyuki Obikawa, Etsuo Takeoka, 2010 .

Deposition of Trace Coolant Elements on Flank Face in Turning of mboxInconel 718 Under High Pressure Conditions

Toshiyuki Obikawa, Wataru Matsumoto, Zhenglong Fang, 2019, Int. J. Autom. Technol..

Simulation Analysis of Cutting Fluid Action

Toshiyuki Obikawa, Eiji Usui, Takahiro Shirakashi, 1977 .

RECENT PROGRESS AND SOME DIFFICULTIES IN COMPUTATIONAL MODELING OF MACHINING

Toshiyuki Obikawa, T. Shirakashi, T. Shirakashi, 1998 .

Analytical Prediction of Cutting Performances of Grooved Rake Face Tools.

Toshiyuki Obikawa, Takahiro Shirakashi, Jun Shinozuka, 1995 .

Single-Point Incremental Micro-Forming of Thin Shell Products Utilizing High Formability

Toshiyuki Obikawa, Takashi Matsumura, Masahiko Yoshino, 2010 .

High Speed Milling Processes with Long Oblique Cutting Edges

Toshiyuki Obikawa, Koji Utsumi, Ippei Kono, 2015 .

Development of Cutting Tools with Built-In Thin Film Thermocouples

Toshiyuki Obikawa, Jun Shinozuka, 2004 .

Feasibility of gentle mode machining of brittle materials and its condition

Toshiyuki Obikawa, Takahiro Shirakashi, 2003 .

MQL Cutting of Inconel 718 with a Super Lattice Coating Tool

Toshiyuki Obikawa, Yasuhiro Kamata, T. Obikawa, 2005 .

Sheet steel lamination for rapid manufacturing

Toshiyuki Obikawa, Masahiko Yoshino, Jun Shinozuka, 1999 .

Behavior of Damping Ratio with Cutting Condition

Weiguo Gong, Toshiyuki Obikawa, Takahiro Shirakashi, 1996 .

FEM analysis of cutting sequence effect on mechanical characteristics in machined layer

Toshiyuki Obikawa, T. Shirakashi, Hiroyuki Sasahara, 1996 .

Cooling performance of micro-texture at the tool flank face under high pressure jet coolant assistance

Toshiyuki Obikawa, Zhenglong Fang, Z. Fang, 2017 .

Computational machining of titanium alloy : Finite element modeling and a few results

Toshiyuki Obikawa, Eiji Usui, E. Usui, 1996 .

Wear characteristic of alumina coated and alumina ceramic tools

Toshiyuki Obikawa, Eiji Usui, Takashi Matsumura, 1997 .

The Analytical Prediction of the Characteristics within Machined Surface Layer (1st Report)

Toshiyuki Obikawa, Takahiro Shirakashi, Hiroyuki Sasahara, 1993 .

Micro Ball End Milling of Titanium Alloy Using a Tool with a Microstructured Rake Face

Toshiyuki Obikawa, Bunji Kani, T. Obikawa, 2012 .

Slow Technology: Design and Manufacturing for Reflecting Emotion and Mental Rest

Toshiyuki Obikawa, 2009 .

Air jet assisted machining of nickel-base superalloy

Masashi Yamaguchi, Toshiyuki Obikawa, Yasuhiro Kamata, 2012 .

Suppression of notch wear of a whisker reinforced ceramic tool in air-jet-assisted high-speed machining of Inconel 718

Masashi Yamaguchi, Toshiyuki Obikawa, T. Obikawa, 2015 .

Analysis of Mist Flow in MQL Cutting

Toshiyuki Obikawa, Jun Shinozuka, Yasuhiro Kamata, 2004 .

High-speed grooving with applying MQL

Toshiyuki Obikawa, Jun Shinozuka, Yasuhiro Kamata, 2006 .

FEM Simulation on Cutting Process of Two Phase Alloys.

Toshiyuki Obikawa, Hiroyuki Sasahara, 1998 .

Chip breaking process simulation by thermo-elastic plastic finite element method

Toshiyuki Obikawa, Takahiro Shirakashi, Jun Shinozuka, 1996 .

Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models

Toshiyuki Obikawa, Takahiro Shirakashi, Hiroyuki Sasahara, 2004 .

Development of Cutting Tool With Built-In Thin Film Thermocouples for Measuring High Temperature Fields in Metal Cutting Processes

Toshiyuki Obikawa, Jun Shinozuka, Ali Basti, 2008 .

Microscopic phase-dependent residual stresses in the machined surface layer of two-phase alloy

Yasuhiro Akiyama, Toshiyuki Obikawa, Jun Shinozuka, 2009 .

In-process Monitoring of Tool Damage by Active Method

Weiguo Gong, Toshiyuki Obikawa, Takahiro Shirakashi, 1995 .

Study on Analytical Prediction of Cutting Tool Life (3rd Report)

Toshiyuki Obikawa, Eiji Usui, Takahiro Shirakashi, 1982 .

Novel path interval formulas in 5-axis flat end milling

Toshiyuki Obikawa, Tsutomu Sekine, T. Obikawa, 2015 .

Surface generation model in grinding with effect of grain shape and cutting speed

Toshiyuki Obikawa, Yoshifumi Ohbuchi, 2005 .

EVALUATION OF EDGE FRACTURE CHARACTERISTICS OF DIAMOND GRAINS IN STONE GRINDING PROCESSES

Toshiyuki Obikawa, Shinsaku Hagiwara, T. Obikawa, 2002 .

The Prediction of Effects of Cutting Condition on Mechanical Characteristics in Machined Layer

Toshiyuki Obikawa, Takahiro Shirakashi, Hiroyuki Sasahara, 1994 .

Normal-Unit-Vector-Based Tool Path Generation Using a Modified Local Interpolation for Ball-End Milling

Toshiyuki Obikawa, Tsutomu Sekine, T. Obikawa, 2010 .

Finite Element Analysis on Discontinuous Chip Formation.

Katsuyuki Taguchi, Toshiyuki Obikawa, Eiji Usui, 1993 .

Micro Incremental Forming Characteristics of Stainless Foil

Toshiyuki Obikawa, Tsutomo Sekine, 2010 .

A method of recognizing tool-wear states based on a fast algorithm of wavelet transform

Weiguo Gong, Toshiyuki Obikawa, Weihong Li, 2005 .