B. Kim

发表

Determination of welding pressure in the non-steady-state porthole die extrusion of improved Al7003 hollow section tubes

Hyung-Ho Jo, Byounghoon Kim, C. Jeong, 2003 .

Estimation of relation between effective strain and hardness by rigid-plastic FEM

J. Park, Y. Choi, B. Min, 2000 .

Estimation of die service life for a die cooling method in a hot forging process

Chung-Gil Kang, D. H. Kim, Byung-Min Kim, 2005 .

Deformation behavior of wrought aluminum alloys in incremental compression experiment with a closed die

C. Kang, B. Kim, W. Kim, 2007 .

Mechanical response of nickel-titanium instruments with different cross-sectional designs during shaping of simulated curved canals.

B M Kim, H. C. Kim, A Versluis, 2009, International endodontic journal.

Stress distribution of three NiTi rotary files under bending and torsional conditions using a mathematic analysis.

T O Kim, G S P Cheung, J M Lee, 2009, International endodontic journal.

Limits Considering the Deformation Characteristics of Tailor Rolled Blank during Hot Stamping

Byung-Jun Kim, Ji-Hoon Kim, D. H. Ko, 2014 .

Spring-back Prediction of DP980 Steel Sheet Using a Yield Function with a Hardening Model

G. Kang, H. S. Lee, J. H. Kim, 2016 .

Scratch characteristics for non-vinyl pre-coated metal sheet using the simple U-bending process

D. Kim, Youngseog Lee, B. Kim, 2003 .

Evaluation of 1-D Non-linear Site Response Analysis using a General Quadratic / Hyperbolic Strength-Controlled Constitutive Model

Y. Hashash, D. R. Groholski, J. Harmon, 2015 .

Influence of Addition of Ge on the Microstructure and Corrosion Properties of Magnesium

Y. Park, I. Park, K. Park, 2012 .

Analysis and Application of Mechanical Clinched Joint Using Cohesive Zone Model

S. B. Lee, B. Hwang, Byung-Jun Kim, 2010 .

An Automated Progressive Process Planning and Die Design and Working System for Blanking or Piercing and Bending of a Sheet Metal Product

Chul Kim, Jong-Chan Choi, Byeongho Kim, 1999 .

Prediction of die wear in the wire-drawing process

Byeong-Woo Kim, Tae Hoon Kim, J. C. Choi, 1997 .

Identification of the bulk behavior of coatings by nano-indentation test and FE-analysis and its application to forming analysis of the coated steel sheet

D. Ko, Byung-Jun Kim, Kwang-Hyeon Lee, 2007 .

Influence of Pd addition on the creep behavior of AZ61 magnesium alloy

Y. Park, I. Park, B. Kim, 2011 .

A study on the prediction of fatigue life in an axi-symmetric extrusion die

Byeong-Woo Kim, Tae-Hoon Kim, J. C. Choi, 1997 .

Optimization of the irregular shape rolling process with an artificial neural network

Dong-Heon Kim, Yun-Jin Kim, Byounghoon Kim, 2001 .