Mingjun Chen

发表

Ultra-precision grinding machine design and application in grinding the thin-walled complex component with small ball-end diamond wheel

Henan Liu, Jian Cheng, Chunya Wu, 2019 .

Research on accuracy analysis and performance verification test of micro-precise five-axis machine tool

Yong Xiao, Wenlan Tian, Mingjun Chen, 2013 .

Theoretical and experimental research on error analysis and optimization of tool path in fabricating aspheric compound eyes by precision micro milling

Yong Xiao, Wenlan Tian, Chunya Wu, 2014 .

Configuration design and accuracy analysis of a novel magnetorheological finishing machine tool for concave surfaces with small radius of curvature

Zhen Fang, Bo Yu, Henan Liu, 2016 .

Configuration design and accuracy analysis of special grinding machine for thin-walled small concave surfaces

Zhen Fang, Henan Liu, Jian Cheng, 2019 .

Fractional order PI speed control for permanent magnet synchronous motor drives

Song Gao, Mingjun Chen, Changhong Li, 2014, Proceeding of the 11th World Congress on Intelligent Control and Automation.

Analysis about diamond tool wear in nano-metric cutting of single crystal silicon using molecular dynamics method

Jiaxuan Chen, Yingchun Liang, Zhen Tong, 2010, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

Development of optimal mitigation contours and their machining flow by micro-milling to improve the laser damage resistance of KDP crystal

Chenhui An, Qi Liu, Jiubin Tan, 2017, Laser Damage.

Study on the surface degenerative layer in ultraprecision machining of KDP crystals

Jinghe Wang, Qingxin Meng, Shen Dong, 2009, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

Particle Swarm Optimizer with C-Pg Mutation

Ning Li, Shaomei Wang, Guojiang Fu, 2005, CIS.

Electrical Discharge Dressing Technique of Metal-bonded Ball-headed Diamond Wheel

Mingjun Chen, 2010 .

Research of an Open CNC System for MRF Machine Tool Based on UMAC

Zhen Fang, Bo Yu, Hui Peng, 2013 .

Effects of kinematic parameters on electric discharge truing of small ball-end diamond wheels for small concave surfaces grinding

Zhen Fang, Bo Yu, Henan Liu, 2018 .

Research on Influence of the Cutter Rake Angle to the Surface Quality during SPDT Machining of Crystal KDP

Ying Chun Liang, Mingjun Chen, Jing He Wang, 2007 .

Atomic force microscope using a diamond tip: a tool for micro/nanomachining on single-crystal silicon surface

Tao Sun, Shen Dong, Qingliang Zhao, 2001, Other Conferences.

Optimization of Thermal-Wave Radar Thermography by Transverse Heat Flow Suppression Technique for Accurate Defect Detection of CFRP Laminates

Yang Wang, Mingjun Chen, Fei Wang, 2021, IEEE Transactions on Instrumentation and Measurement.

Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing

Xiaodong Yuan, Jian Cheng, Mingjun Chen, 2019, International Journal of Extreme Manufacturing.

Research on the Modeling and Experimenting of Burr Formation Process in Double-Edged Micro-Plat End Milling Operation

Ning He, Zhanqiang Liu, Mingjun Chen, 2013 .

Study on the optical performance and characterization method of texture on KH2PO4 surface processed by single point diamond turning

Jian Cheng, Mingjun Chen, Qilong Pang, 2013 .

Study on Micromachine Tools in Fabrication of Microparts

Bo Wang, Yingchun Liang, Mingjun Chen, 2006, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Influence of surface cracks on laser-induced damage resistance of brittle KH₂PO₄ crystal.

Jian Cheng, Mingjun Chen, Wei Liao, 2014, Optics express.

Two important mechanisms damaging KH2PO4 crystal processed by ultraprecision fly cutting and their relationships with cutting parameters.

Wei Jiang, Jian Cheng, Mingjun Chen, 2013, Applied optics.

Integrated MD simulation of scratching and shearing of 3D nanostructure

Yingchun Liang, Mingjun Chen, Qingshun Bai, 2008 .

Molecular understanding of conformational dynamics of a fibronectin module on rutile (110) surface.

Chunya Wu, Mingjun Chen, Chunya Wu, 2010, Langmuir : the ACS journal of surfaces and colloids.

Research on the critical condition of Brittle-Ductile Transition about Micro-Milling of KDP crystal and experimental verification

Jian Cheng, Mingjun Chen, Jian Cheng, 2015 .

Molecular dynamics simulations of thermal effects in nanometric cutting process

Yingchun Liang, Yongbo Guo, Mingjun Chen, 2010 .

Adsorption of arginine-glycine-aspartate tripeptide onto negatively charged rutile (110) mediated by cations: the effect of surface hydroxylation.

Peter T Cummings, Chunya Wu, Mingjun Chen, 2013, ACS applied materials & interfaces.

Research on the influence of machining introduced sub-surface defects and residue stress upon the mechanical properties of single crystal copper

Chunya Wu, Mingjun Chen, Gaobo Xiao, 2010 .

Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal

Dominiek Reynaerts, Jun Qian, Chunya Wu, 2017 .

Research on the Influence Factors for the Deflection of Micro-Ball-End Cutter in Micro-End-Milling Process

Mingjun Chen, Haibo Ni, Zhi Jun Wang, 2011 .

Forecasting of Surface Roughness and Cutting Force in Single Point Diamond Turning for KDP Crystal

Shen Dong, Wen Jun Zong, Mingjun Chen, 2007 .

Mechanism of Chip-Formation in Nanometric Cutting of Single-Crystal Copper by Molecular Dynamics

Lihua Lu, Chunya Wu, Mingjun Chen, 2012 .

Potential Analysis in Nanoturning of Single Crystal Silicon Using Molecular Dynamics

Zhen Tong, Mingjun Chen, Ying Chun Liang, 2011 .

Influence of period and amplitude of microwaviness on KH2PO4 crystal’s laser damage threshold

Wei Jiang, Qiao Xu, Mingjun Chen, 2010 .

Optimization of morphological parameters for mitigation pits on rear KDP surface: experiments and numerical modeling.

Jian Wang, Chenhui An, Jian Cheng, 2017, Optics express.

Study of modulation property to incident laser by surface micro-defects on KH 2 PO 4 crystal

Mingjun Chen, Mingjun Chen, Mingquan Li, 2012 .

Model of the material removal function and an experimental study on a magnetorheological finishing process using a small ball-end permanent-magnet polishing head.

Jian Cheng, Mingjun Chen, Henan Liu, 2017, Applied optics.

Influence of Light Intensification by Subsurface Cracks on KH2PO4 Crystal's Laser Induced Damage Threshold

Wei Jiang, Chenhui An, Jian Cheng, 2013 .

Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induced light intensification.

Jian Cheng, Mingjun Chen, Wei Liao, 2013, Optics express.

Analysis of 3D microtopography in machined KDP crystal surfaces based on fractal and wavelet methods

Kai Cheng, Mingjun Chen, Qilong Pang, 2008 .