Cherl-Jin Kim

发表

A Study on the Torque Performance to Capacitance of a Capacitor-run type Single Phase Induction Motor

Cherl-Jin Kim, Chul-Yong Choi, Soo-Hyun Baek, 2005 .

A Study on the Impedance Model and Driving Performance for the Electrical Discharge Type External Electrode Fluorescent Lamp

Cherl-Jin Kim, Byeong-Kyu Yoo, 2008 .

Sliding Mode Current Controller Design for Power LEDs

Cherl-Jin Kim, Eung-Seok Kim, 2011 .

The Improvement of Thrust Characteristics by Correction Current in Linear Pulse Motor

Cherl-Jin Kim, Soo-Hyun Baek, Shin-Yong Youn, 1998 .

Nonlinear observer based control of PEM fuel cell systems

Cherl-Jin Kim, Eung-Seok Kim, 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

Modeling and Detent Torque Hormonic Analysis of Hybrid Type Step Motor

Cherl-Jin Kim, Soo-Hyun Baek, Shin-Yong Yoon, 2002 .

A Study on the Modeling and Design of Single Phase Induction Generators

Cherl-Jin Kim, Kwan Yong Lee, 2005 .

Nonlinear State Feedback Controller Design for Buck-Boost Converters

Cherl-Jin Kim, Eung-Seok Kim, Heung-Kyo Shin, 2018, 2018 21st International Conference on Electrical Machines and Systems (ICEMS).

Cascade Controller Design for CUK Converter

Cherl-Jin Kim, Eung-Seok Kim, Young-Tae Kim, 2018, 2018 21st International Conference on Electrical Machines and Systems (ICEMS).

Characteristics of a High Power Factor Boost Converter with Continuous Current Mode Control

Cherl-Jin Kim, Jun-Young Jang, 2004 .

A study on the power LEDs drive circuit design with asymmetrical half-bridge resonant converter

Cherl-Jin Kim, Eung-Seok Kim, Heung-Kyo Shin, 2009, 2009 International Conference on Electrical Machines and Systems.

Demagnetization characteristic analysis of inset-type-flux-reversal machines

Cherl-Jin Kim, Tae Heoung Kim, Heung-Kyo Shin, 2012, 2012 15th International Conference on Electrical Machines and Systems (ICEMS).

Constant current controller design for power LEDs using parameter adaptive law

Cherl-Jin Kim, Eung-Seok Kim, Heung-Kyo Shin, 2010, 2010 International Conference on Electrical Machines and Systems.

The Maximum Demand Power Reduction of Small Industrial Factory based on Microgrid

Sang-Won Park, Cherl-Jin Kim, Hong-Soon Chang, 2017 .

Torque Ripple Improvement for Interior Permanent Magnet Synchronous Motor Considering Parameters With Magnetic Saturation

Ju Lee, Cherl-Jin Kim, Jae-Nam Bae, 2009, IEEE Transactions on Magnetics.

Circuit Design and Performance Analysis of CCFL Dimming Controller With Frequency Modulation

Cherl-Jin Kim, Shin-Yong Yoon, Jae-Geun Ji, 2004 .

A study on the multiple cold cathode fluorescent lamp drive with capacitive coupling

Cherl-Jin Kim, Young-Dae Son, Heung-Kyo Shin, 2008, 2008 International Conference on Electrical Machines and Systems.

Transient Characteristic Analysis of Induction Motor at the Bus Transfer by Standby Power Supply at the Power Failure

Cherl-Jin Kim, Jong-Gyeum Kim, Heung-Kyo Shin, 2019, 2019 22nd International Conference on Electrical Machines and Systems (ICEMS).

Active boost converter a study on the characteristics of power factor correction circuits with input active boost converter

Yong-Ha Kim, Cherl-Jin Kim, Jun-Young Jang, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

Study on the improvement of power utilization efficiency of industrial consumers using small scale microgrid

Sang-Won Park, Cherl-Jin Kim, Hong-Soon Chang, 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

A study on the energy recovery circuit design for energy efficient driving of plasma flat lamp(PFL)

Cherl-Jin Kim, Eung-Seok Kim, Jeongo Park, 2010, 2010 International Conference on Electrical Machines and Systems.

Nonlinear state feedback control of PEM fuel cell systems

Cherl-Jin Kim, Eung-Seok Kim, 2009, 2009 International Conference on Electrical Machines and Systems.

A study on the constant braking performance of eddy current braker with speed variation

Cherl-Jin Kim, Soo-Hyun Baek, Kwan Yong Lee, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

Optimal design for characteristics improvement of single phase line-start permanent magnet synchronous motor

Cherl-Jin Kim, Won-Sik Lee, Gyu-Tak Kim, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

The Thrust and Normal Force Analysis of Hybrid Linear Pulse Motor

Cherl-Jin Kim, Soo-Hyun Baek, Yong Kim, 2001 .

Drive Characteristics Using Resonant Frequency of a Ring Type Ultrasonic Motor

Cherl-Jin Kim, Soo-Hyun Baek, Shin-Yong Yoon, 2003 .

Performance Analysis of the Eddy Current Braker with Multi-layer Rotor Considering Constant Braking Torque

Cherl-Jin Kim, Kwan Yong Lee, Kyoung-Hee Han, 2004 .

The velocity control of a permanent magnet type stepping motor using a self-tuning theory

Young-Tae Kim, Cherl-Jin Kim, Sang-Don Lee, 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

Development of Bidirectional AC-DC Converter for Energy Storage Systems

Cherl-Jin Kim, Eung-Seok Kim, Young-Tae Kim, 2019, 2019 22nd International Conference on Electrical Machines and Systems (ICEMS).

The optimum design of interior permanent magnet synchronous motor for the vibration reduction

Cherl-Jin Kim, Gyu-Tak Kim, Heung-Kyo Shin, 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

A Study on the design and performance of electronic ballast for CCFL dimming control with frequency modulation

Cherl-Jin Kim, Shin-Yong Yoon, Jae-Geun Ji, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

The Improvement of Position Precision for Hybrid Linear Pulse Motor

Cherl-Jin Kim, Soo-Hyun Baek, Yong Kim, 2001 .

A study on irreversible permanent magnet demagnetization in flux-reversal machines

Cherl-Jin Kim, Heung-Kyo Shin, Tae Heoung Kim, 2011, 2011 International Conference on Electrical Machines and Systems.

Torque characteristics of single phase induction motor for phase control method

Cherl-Jin Kim, Chul-Yong Choi, Soo-Hyun Baek, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

Robust Torque Control of DC Link Voltage Fluctuation for SynRM Considering Inductances With Magnetic Saturation*

Cherl-Jin Kim, Jae-Nam Bae, Won-Ho Kim, 2010, IEEE Transactions on Magnetics.