František Trebuňa

发表

Experimental Identification of Modal Parameters of Thin Metal Sheets by using of DIC

Martin Hagara, František Trebuňa, Róbert Huňady, 2012 .

Estimation of Residual Life and Proposed Adjustments for Extending the Life of an Overhead Travelling Crane

František Trebuňa, Ingrid Delyová, Peter Sivák, 2016 .

Using of Program Mezvyna for Measurement of Residual Stresses to Solving Practical Problems

František Trebuňa, Patrik Šarga, 2011 .

An inspection of pipe by snake robot

Miroslav Pástor, František Trebuňa, Ivan Virgala, 2016 .

Analysis of possible causes of cracks initiation on barking drum

František Trebuňa, Peter Trebuňa, František Šimčák, 2014 .

Applied mechanics and mechatronics II : special topic volume with invited peer reviewed papers only

František Trebuňa, 2014 .

Stress Analysis Performed in the Near Surrounding of Small Hole by a Digital Image Correlation Method

Martin Hagara, František Trebuňa, Róbert Huňady, 2014 .

The Measurement of Standing Wave Patterns by using High-speed Digital Image Correlation

Martin Hagara, František Trebuňa, Róbert Huňady, 2014 .

The analysis of failure causes of the rotor shaft of steam turbines

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2017 .

The Analyses of Large Displacement Pendulum Movement Using High-Speed Digital Image Correlation and Matlab/Simulink

Martin Hagara, František Trebuňa, Róbert Huňady, 2016 .

Failure analysis of mechanical elements in steelworks equipment by methods of experimental mechanics

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2010 .

The Use of Modan 3D in Experimental Modal Analysis

Martin Hagara, František Trebuňa, Róbert Huňady, 2013 .

Determination of the Necessary Geometric Parameters of the Specimen in Ring-Core Method

František Trebuňa, Patrik Šarga, František Menda, 2013 .

Analysis of the Geometric Shape of the Cutter in Ring-core Measurement☆

František Trebuňa, Tomáš Lipták, Patrik Šarga, 2014 .

Conception of Contactless Strip Edge Guiding System on Continuous Galvanizing Line in U.S Steel Košice

František Trebuňa, František Menda, 2012 .

Modal Analysis of the Manipulator Arm on the Mobile Chassis

Martin Hagara, František Trebuňa, Róbert Huňady, 2014 .

Experimental modal analysis performed by high-speed digital image correlation system

Martin Hagara, František Trebuňa, 2014 .

Stress Analysis of a Rotating Body by Means of Photostress Method and Using Solidworks Programme

Miroslav Pástor, František Trebuňa, Peter Frankovský, 2014 .

Applications of Applied Mechanics to the Solution of Problems Connected with Transportation and Storage of Spent Nuclear Fuel

František Trebuňa, Jozef Bocko, František Šimčák, 2016 .

Kinematic Analysis of Planar Parallel Mechanism

František Trebuňa, Michal Kelemen, Ivan Virgala, 2017 .

The Possibilities in Use of ESPI Method by Investigation of Strain Fields of Specimen with Stress Concentrator

Martin Hagara, František Trebuňa, Róbert Huňady, 2016 .

Defects in the Bearing Elements of the Equipment for High-pressure Die Casting

Miroslav Pástor, František Trebuňa, František Šimčák, 2016 .

Program Tools for Residual Stress Evaluation by Ring-Core Method

František Trebuňa, Tomáš Lipták, Patrik Šarga, 2015 .

Quantification of Force Effects in Dynamically Loaded Pipe Systems

František Trebuňa, Jozef Bocko, Peter Sivák, 2013 .

Operational Safety of Compressor Station Pipeline

František Trebuňa, Ingrid Delyová, Peter Sivák, 2014 .

Proposal of Methodology for Verification of Stress Distribution in Bolted Joints by Optical Method

Miroslav Pástor, František Trebuňa, Peter Frankovský, 2015 .

Numerical and experimental modelling of carrying elements of heavy metallurgical equipments

František Trebuňa, Alexander Gmiterko, František Šimčák, 2010 .

Proposal of Methodology and Calibration of Dynamometers for Quantification of Forces in Anchor Bolts

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2014 .

Modification of the Centre Differential Gearbox

František Trebuňa, Peter Frankovský, Silvia Medvecká-Beňová, 2015 .

Analysis of Sluice Gates of Hydroelectric Power Stations

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2013 .

Design of a Bend Testing Machine for Determination of Residual Stresses by the MTS-3000 Ring-Core System

František Trebuňa, Patrik Šarga, Štefan Beck, 2017 .

Analysis of causes of casting pedestal failures and the measures for increasing its residual lifetime

Miroslav Pástor, František Trebuňa, Jozef Bocko, 2013 .

Methods for Verification of Safety of the Sluice Gates in Water Power Plants

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Characteristic Entities in PhotoStress Method

František Trebuňa, Peter Frankovský, František Šimčák, 2014 .

An Application of High-speed Digital Image Correlation in Determination of Modal Parameters

Martin Hagara, František Trebuňa, Róbert Huňady, 2011 .

Increasing of Reliability of Converter

František Trebuňa, Jozef Bocko, František Šimčák, 2006 .

Trajectory Tracking Controller of Air Bellow

Miroslav Pástor, František Trebuňa, Ivan Virgala, 2016 .

Influence of Material Structure and its Properties on Predicting Life of Pressure Pipelines

František Trebuňa, Ingrid Delyová, Peter Sivák, 2014 .

Application of Transmission Photoelasticimetry for Stress Concentration Analyses in Construction Supporting Parts

Miroslav Pástor, František Trebuňa, M. Pástor, 2014 .

Comparison of Different Simulation Approaches in Ring-Core Method

František Trebuňa, Tomáš Lipták, Patrik Šarga, 2014 .

Possibility of Carrying Capacity Increasing of Anchor Bolts in Heavy Equipments of Metallurgical Plants

František Trebuňa, Jozef Bocko, František Šimčák, 2013 .

Locomotion of Snake Robot through the Pipe

František Trebuňa, Michal Kelemen, Ivan Virgala, 2015 .

Identification of causes of radial fan failure

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2009 .

Residual Stress Analysis in Containers for Transport of Radioactive Materials

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2015 .

Modal Analysis of Exhaust Fan Impeller

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

Analysis of the aspects of residual stresses quantification performed by 3D DIC combined with standardized hole-drilling method

Miroslav Pástor, Martin Hagara, František Trebuňa, 2019 .

Failure analysis of storage tank

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Analysis of crack initiation in the press frame and innovation of the frame to ensure its further operation

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2011 .

Design of Modifications for Constructional Elements of Manipulator Arm Aimed at Measuring of Operational Torque

Miroslav Pástor, František Trebuňa, Ladislav Vargovčík, 2015 .

New Method of Residual Stress Evaluation and its Advantages in Comparison with More Common Hole-drilling Method

František Trebuňa, Patrik Šarga, František Menda, 2013 .

Methodology for experimental analysis of pipeline system vibration

Martin Hagara, František Trebuňa, Matúš Kalina, 2012 .

Complex approach to the vibrodiagnostic analysis of excessive vibration of the exhaust fan

Miroslav Pástor, František Trebuňa, Róbert Huňady, 2014 .

Experimental Vibration Analysis of Railcar for Spent Nuclear Fuel Transportation

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

The failure analysis of the holder of a crusher moving knife

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2017 .

Applying of Stress Collectives in the Design of Structural Elements of Heavy Load-Bearing Structures

Darina Hroncová, František Trebuňa, Ingrid Delyová, 2016 .

Analysis of Reasons of Steam Turbogenerator Failure

Miroslav Pástor, František Trebuňa, František Šimčák, 2015 .

Decreasing of vibration amplitudes of the converter pedestal by design changes and changes in prestress of the bolted joints

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Determination of the Possible Causes of Cracks in Pins of Quick Operating Valves in Hydroelectric Power Plant

František Trebuňa, Jozef Bocko, Patrik Šarga, 2014 .

Application of PhotoStress method in Stress Analysis of Structural Elements Under Consideration of Centrifugal Force Effect

František Trebuňa, Peter Frankovský, Ján Kostka, 2014 .

Identification of pipes damages on gas compressor stations by modal analysis methods

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

The Strain Gage Method for Determination of Input Working Life Parameters of Pipes in Compressor Stations

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2007 .

Kinematics of Self-Reconfigurable Robotic System

František Trebuňa, Zdenko Bobovský, Juraj Smrček, 2010 .

Stress and Strain Analysis in Critical Joints of the Bearing Parts of the Mobile Platform Using Tensometry

Miroslav Pástor, František Trebuňa, František Šimčák, 2016 .

Balancing of Forces in Segments of Axial Bearing by Dynamometers

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2015 .

Estimation of Residual Stress Field Uniformity when Using the Ring-Core Method

František Trebuňa, Patrik Šarga, František Menda, 2014 .

Further Possibilities of Using Software PhotoStress for Separation of Principal Normal Stresses

František Trebuňa, Peter Frankovský, Ján Jadlovský, 2010 .

Verification of Stress Components Determined by Experimental Methods Using Airy Stress Function

František Trebuňa, Peter Frankovský, Mária Kenderová, 2012 .

Concept of Locomotion Mobile Undercarriage Structure Control for the Path Tracking

František Trebuňa, Michal Kelemen, Ľubica Miková, 2013 .

Application of shape memory alloy (SMA) as actuator

František Trebuňa, Michal Kelemen, Ivan Virgala, 2015 .

Applications of the Strain Gauge for Determination of Residual Stresses using Ring-core Method

František Trebuňa, Peter Frankovský, Kristína Masláková, 2012 .