Giulio Dubbioso

发表

Investigation of the radial bearing force developed during actual ship operations. Part 2: Unsteady maneuvers

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2015 .

CFD analysis of turning abilities of a submarine model

Giulio Dubbioso, Riccardo Broglia, Stefano Zaghi, 2017 .

Hydrodynamic Characterization of USV Vessels with Innovative SWATH Configuration for Coastal Monitoring and Low Environmental Impact

Giulio Dubbioso, Riccardo Broglia, Stefano Zaghi, 2016 .

In-plane and single blade loads measurement setups for propeller performance assessment during free running and captive model tests

Fabrizio Ortolani, Giulio Dubbioso, 2020 .

Experimental Investigation of Asymmetrical Propeller Behaviour of Twin Screw Ships During Manoeuvres

Salvatore Mauro, Giulio Dubbioso, Michele Viviani, 2012 .

Experimental investigation of single blade and propeller loads by free running model test. Straight ahead sailing

Fabrizio Ortolani, Giulio Dubbioso, F. Ortolani, 2019, Applied Ocean Research.

CFD Analysis of Propeller-Rudder Interaction

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2015 .

Experimental approaches for the diagnostics of hydroacoustic problems in naval propulsion

Giulio Dubbioso, Mario Felli, M. Falchi, 2015 .

Marine propulsion system dynamics during ship manoeuvres

Giulio Dubbioso, Marco Altosole, M. Cerruti, 2008 .

Turning ability analysis of a fully appended twin screw vessel by CFD. Part II: Single vs. twin rudder configuration

Giulio Dubbioso, Andrea Di Mascio, Riccardo Broglia, 2015 .

Investigation of asymmetrical shaft power increase during ship maneuvers by means of simulation techniques

Giulio Dubbioso, Massimo Figari, Michele Viviani, 2010 .

AutoDrop LAB Report

Fabrizio Ortolani, Giulio Dubbioso, Francesco La Gala, 2012 .

Analysis of the asymmetric behavior of propeller–rudder system of twin screw ships by CFD

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2017 .

Investigation of the radial bearing force developed during actual ship operations. Part 1: Straight ahead sailing and turning maneuvers

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2015 .

Tomographic-PIV Survey of the Near-Field Hydrodynamic and Hydroacoustic Characteristics of a Marine Propeller

Giulio Dubbioso, Massimo Falchi, Mario Felli, 2015 .

CFD analysis of the sensitivity of propeller bearing loads to stern appendages and propulsive configurations

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Analysis of a marine propeller operating in oblique flow. Part 2: Very high incidence angles

Giulio Dubbioso, Roberto Muscari, A. Di Mascio, 2014 .

Simulation of turning circle by CFD: Analysis of different propeller models and their effect on manoeuvring prediction

Giulio Dubbioso, Andrea Di Mascio, Riccardo Broglia, 2013 .

Propeller modeling approaches for off–design operative conditions

Giulio Dubbioso, Diego Villa, Roberto Muscari, 2019, Ocean Engineering.

Preliminary Evaluation of Control and Manoeuvring Qualities for the AUTODROP-UUV vehicle

Fabrizio Ortolani, Giulio Dubbioso, F. La Gala, 2012 .

Analysis of fretting inception for marine propeller by single blade loads measurement in realistic operating conditions. Straight ahead and turning circle maneuver

Fabrizio Ortolani, Giulio Dubbioso, 2020 .

Analysis of twin screw ships' asymmetric propeller behaviour by means of free running model tests

Salvatore Mauro, Giulio Dubbioso, Andrea Coraddu, 2013 .

Investigation of Twin-Screw Naval Ships Maneuverability Behavior

Giulio Dubbioso, Andrea Di Mascio, Michele Viviani, 2011 .

Analysis of propeller bearing loads by CFD. Part II: Transient maneuvers

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Analysis of propeller bearing loads by CFD. Part I: Straight ahead and steady turning maneuvers

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Off-Design Propulsion Power Plant Investigations by Means of Free Running Manoeuvring Ship Model Test and Simulation Techniques

Salvatore Mauro, Giulio Dubbioso, Michele Viviani, 2011 .

Numerical analysis of marine propellers low frequency noise during maneuvering

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2020 .

Method for estimating parameters of practical ship manoeuvring models based on the combination of RANSE computations and System Identification

Giulio Dubbioso, Riccardo Broglia, Michele Viviani, 2015 .

Experimental Methodologies For Noise Source Diagnostics In Marine And Naval Engineering

Giulio Dubbioso, Massimo Falchi, Mario Felli, 2015 .

Aspects of twin screw ships semi-empirical maneuvering models

Giulio Dubbioso, Michele Viviani, 2012 .

Experimental investigation of single blade loads by captive model tests in pure oblique flow. Part II: Propeller in-plane loads and preliminary comparison of single blade loads during transient phases

Fabrizio Ortolani, Giulio Dubbioso, Giorgio Tani, 2021 .

Modal analysis of the wake past a marine propeller

Giulio Dubbioso, Francesca Magionesi, Roberto Muscari, 2018, Journal of Fluid Mechanics.

A Comprehensive Numerical Model for Horizontal Axis Wind Turbines Aeroelasticity

Massimo Gennaretti, Claudio Testa, Giulio Dubbioso, 2013 .

CFD Analysis of Propeller Performance in Oblique Flow

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2013 .

Analysis of the flow field around a rudder in the wake of a simplified marine propeller

Giulio Dubbioso, Roberto Muscari, Andrea Di Mascio, 2017, Journal of Fluid Mechanics.

Analysis of the performances of a marine propeller operating in oblique flow

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2013 .

Simplified hydrodynamic models for the analysis of marine propellers in a wake-field

Giulio Dubbioso, Danilo Durante, C. Testa, 2013 .

Prediction of Manoeuvring Properties for a Tanker Model by Computational Fluid Dynamics

Giulio Dubbioso, Andrea Di Mascio, Riccardo Broglia, 2011 .

Experimental and Numerical Investigation of Propeller Loads in Off-Design Conditions

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2018 .