Joseph K. Davidson

发表

Using Tolerance-Maps to Transfer Datum Plane From Design Tolerancing to Machining Tolerancing

Ke Jiang, Joseph K. Davidson, Jami J. Shah, 2013 .

Tolerance-Maps to Model Composite Positional Tolerancing for Patterns of Features

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2018, J. Comput. Inf. Sci. Eng..

Tolerance-Maps for Line-Profiles Constructed From Boolean Operations on Primitive T-Map Elements

Joseph K. Davidson, Jami J. Shah, Y. He, 2013 .

Reconciling the Differences Between Tolerance Specification and Measurement Methods

Joseph K. Davidson, Jami J. Shah, Prabath Vemulapalli, 2013 .

Modeling of Geometric Variations Within a Tolerance-Zone for Circular Runout

Joseph K. Davidson, Jami J. Shah, Patrick J. Clasen, 2009, DAC 2009.

Using Tolerance-Maps to Generate Frequency Distributions of Clearance and Allocate Tolerances for Pin-Hole Assemblies

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2007, J. Comput. Inf. Sci. Eng..

Limits at $3 in a New Formulation for Path-Placement in the Workcells of Planar 3-R Robots

Joseph K. Davidson, N. A. Soman, 1995 .

Automated 1st Order Tolerancing: Schema Generation

Joseph K. Davidson, Jami J. Shah, Sayed Mohammad Hejazi, 2016, DAC 2016.

Navigating the Tolerance Analysis Maze

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2007 .

Representing stresses that arise in parallel assemblies that contain imperfect geometry allowed by tolerances

Joseph K. Davidson, Jami J. Shah, Lupin Niranjan Jaishankar, 2012, DAC 2012.

Computer Modeling of Geometric Variations in Mechanical Parts and Assemblies

Joseph K. Davidson, Jami J. Shah, Yanyan Wu, 2003, J. Comput. Inf. Sci. Eng..

Comparative Study of Tolerance Analysis Methods Applied to a Complex Assembly

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2018 .

Mathematical Tools for Automating Digital Fixture Setups: Constructing T-Maps and Relating Metrological Data to Coordinates for T-Maps and Deviation Spaces

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2018, J. Comput. Inf. Sci. Eng..

Automatic generation of min/max tolerance charts for tolerance analysis from CAD models

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2008, Int. J. Comput. Integr. Manuf..

Toward Automatic Tolerancing of Mechanical Assemblies: Assembly Analyses

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2014, J. Comput. Inf. Sci. Eng..

Statistical Tolerance Allocation for Tab-Slot Assemblies Utilizing Tolerance-Maps

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2010, J. Comput. Inf. Sci. Eng..

Modeling of Geometric Variations for Line-Profiles

Joseph K. Davidson, Jami J. Shah, 2012, J. Comput. Inf. Sci. Eng..

Tolerance-Maps for Line-Profiles Formed by Intersecting Kinematically Transformed Primitive Tolerance-Map Elements

Joseph K. Davidson, Jami J. Shah, Nathan Kalish, 2016, J. Comput. Inf. Sci. Eng..

Tolerance analysis of parallel assemblies using Tolerance-Maps® and a functional Map derived from induced deformations

Joseph K. Davidson, Jami J. Shah, Lupin Niranjan Jaishankar, 2013, DAC 2013.

Two 7-R manipulators which provide controllably dexterous workspace

Joseph K. Davidson, 1989, Proceedings, 1989 International Conference on Robotics and Automation.

User Defined Assembly Features and Pattern Recognition From STEP AP203

Joseph K. Davidson, Jami J. Shah, Prabath Vemulapalli, 2014 .

Improvements to algorithms for computing the Minkowski sum of 3-polytopes

Joseph K. Davidson, Jami J. Shah, Yanyan Wu, 2003, Comput. Aided Des..

Rigid Body Location and Robot Workspaces: Some Alternative Manipulator Forms

Joseph K. Davidson, K. H. Hunt, J. Davidson, 1987 .

Automated Iterative Tolerance Value Allocation and Analysis

Joseph K. Davidson, Jami J. Shah, Sayed Mohammad Hejazi, 2016, DAC 2016.

Virtual Part Arrangement in Assemblies for Automatic Tolerance Chart Based Stackup Analysis

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2006 .

Standardization of CMM Fitting Algorithms and Development of Inspection Maps for Use in Statistical Process Control

Joseph K. Davidson, Jami J. Shah, Neelakantan Mani, 2011 .

Semantic Interoperability of GD&T Data Through ISO 10303 Step AP242

Joseph K. Davidson, Jami J. Shah, Sayed Mohammad Hejazi, 2016, DAC 2016.

Simulated and Experimental Verification of CMM Feature Fitting Algorithms

Joseph K. Davidson, Jami J. Shah, Prashant Mohan, 2015 .

A Framework for Explicating Formal Geometrical and Dimensional Tolerances Schema From Manufacturing Process Plans for Three-Dimensional Conformance Analysis

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2015, Journal of Computing and Information Science in Engineering.

Tolerance-Maps Applied to a Point-Line Cluster of Features

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2005, DAC 2005.

Methods of Robotics and the Pseudoinverse to Obtain the Least-Squares Fit of Measured Points on Line-Profiles

Joseph K. Davidson, Jami J. Shah, Y. He, 2012 .

The Dual Torus and Associated Linkages

Joseph K. Davidson, K. H. Hunt, 1983 .

Library of T-Maps for Dimensional and Geometric Tolerances

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2014 .

A Comparative Study Of Tolerance Analysis Methods

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2005, J. Comput. Inf. Sci. Eng..

A mechanism for validating dimensioning and tolerancing schemes in CAD systems

Joseph K. Davidson, Jami J. Shah, Tatjana Kandikjan, 2001, Comput. Aided Des..

Application of T-Maps for Composite Position Tolerance for Patterns of Features

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2017 .

Tolerance Analysis and Allocation using Tolerance-Maps for a Power Saw Assembly

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2007 .

Modeling of Geometric Variations for Line-Profiles

Joseph K. Davidson, Jami J. Shah, J. Shah, 2012, J. Comput. Inf. Sci. Eng..

Robot Workspace of a Tool Plane: Part 2—Computer Generation and Selected Design Conditions for Dexterity

Joseph K. Davidson, P. Pingali, 1987 .

Automation of Linear Tolerance Charts and Extension to Statistical Tolerance Analysis

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2003 .

Closure to “Discussion of ‘Robot Workspace of a Tool Plane: Part 2—Computer Generation and Selected Design Conditions for Dexterity’” (1987, ASME J. Mech. Transm. Autom. Des., 109, p. 72)

Joseph K. Davidson, P. Pingali, 1987 .

Design Conditions for the Orientation and Attitude of a Robot Tool Carried by a 3-R Spherical Wrist

Joseph K. Davidson, Mohamed B. Trabia, J. Davidson, 1989 .

Effects of Size, Orientation, and Form Tolerances on the Frequency Distributions of Clearance Between Two Planar Faces

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2011, J. Comput. Inf. Sci. Eng..

Using Planar Kinematics to Construct the Full 4-D Tolerance-Map for a Line-Profile

Joseph K. Davidson, Jami J. Shah, S. B. Savaliya, 2013 .

Comparison of Two Similar Mathematical Models for Tolerance Analysis: T-Map and Deviation Domain

Joseph K. Davidson, Max Giordano, Mathieu Mansuy, 2013 .

Models for Computer Aided Tolerancing in Design and Manufacturing

Joseph K. Davidson, 2006 .

Automated Tolerance Analysis of Mechanical Assemblies from a CAD Model with PMI

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2019 .

Screws and Robotics for Metrology

Joseph K. Davidson, Jami J. Shah, S. B. Savaliya, 2013 .

Development of a library of feature fitting algorithms for CMMs

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2015 .

The 1984 Mechanisms Conference

Joseph K. Davidson, Ting W. Lee, Ting W. Lee, 1984 .

Computer aided GD&T advisor based on Y14.5 conformance & good practice

Joseph K. Davidson, Jami J. Shah, Sanjay Ramaswamy, 2001 .

Preliminary Investigation on Generating an Explicit GD&T Scheme From a Process Plan

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2013 .

Using Tolerance-Maps to Generate Frequency Distributions of Clearance for Pin-Hole Assemblies

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2006, DAC 2006.

A Mechanics-Based Computer Algorithm for Displaying the Margin of Static Stability in Four-Legged Vehicles

Joseph K. Davidson, G. Schweitzer, 1990 .

A Synthesis Procedure for Design of 3-R Planar Robotic Workcells in Which Large Rotations Are Required at the Workpiece

Joseph K. Davidson, 1992 .

A Two-Dimensional Formulation for Path-Placement in the Workcells of Planar 3-R Robots

Joseph K. Davidson, N. A. Soman, J. Davidson, 1995 .

Method for automating digital fixture-setups that are optimal for machining castings to minimize scrap

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2016 .

Rationalization and Computer Modeling of GD&T Classes

Joseph K. Davidson, Jami J. Shah, Yanyan Wu, 2002 .

Substitute-Wrists to Aid in the Placing of Tools on Robots With 3-R Spherical Wrists

Joseph K. Davidson, Mohamed B. Trabia, 1992 .

A New Mathematical Model for Geometric Tolerances as Applied to Axes

Joseph K. Davidson, Jami J. Shah, S. Bhide, 2003, DAC 2003.

Using tolerance maps to validate machining tolerances for transfer of cylindrical datum in manufacturing process

Joseph K. Davidson, Jami J. Shah, Jianhua Liu, 2014 .

A Synthesis Method For Placing Workpieces In RPR Planar Robotic Workcells

Joseph K. Davidson, K. D. Chaney, K. Chaney, 1998 .

A Comparative Study Of Tolerance Analysis Methods

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2005, J. Comput. Inf. Sci. Eng..

A New Mathematical Model for Geometric Tolerances as Applied to Round Faces

Joseph K. Davidson, Jami J. Shah, A. Mujezinović, 2002 .

Statistical Tolerance Analysis With Sensitivities Established From Tolerance-Maps and Deviation Spaces

Joseph K. Davidson, Jami J. Shah, Aniket Chitale, 2019, J. Comput. Inf. Sci. Eng..

Mathematical Tools for Building Setup-Maps to Optimally Locate Each Casting in a Machining Fixture: Case Study With Minimum Wall Thickness

Joseph K. Davidson, Jami J. Shah, Nathan Kalish, 2021, Journal of Computing and Information Science in Engineering.

A New Math Model for Geometric Tolerances to Promote Interchangeability in Manufacturing: A Key to Success in Global and Non-collocated Design

Joseph K. Davidson, Jami J. Shah, 2005 .

Geometric tolerances: A new application for line geometry and screws

Joseph K. Davidson, Jami J. Shah, J. Shah, 2002 .

Tolerance Analysis and Allocation for Design of a Self-Aligning Coupling Assembly Using Tolerance-Maps

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2013 .

Simulation-Based Tolerance and Assemblability Analyses of Assemblies With Multiple Pin/Hole Floating Mating Conditions

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2005 .

A Complete Variation Algorithm for Slot and Tab Features for 3D Simulation-Based Tolerance Analysis

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2005, DAC 2005.

Analysis neutral data structure for GD&T

Joseph K. Davidson, Jami J. Shah, Zhengshu Shen, 2008, J. Intell. Manuf..

Toward Automatic Tolerancing of Mechanical Assemblies: First-Order GD&T Schema Development and Tolerance Allocation

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2015, J. Comput. Inf. Sci. Eng..

Automatic Detection of Directions of Dimensional Control in Mechanical Parts

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2014 .

Robots and Screw Theory: Applications of Kinematics and Statics to Robotics

Joseph K. Davidson, Kenneth H. Hunt, Gordon R. Pennock, 2004 .

Automatic Detection and Extraction of Tolerance Stacks in Mechanical Assemblies

Joseph K. Davidson, Jami J. Shah, Payam Haghighi, 2014, DAC 2014.

Statistical Tolerance Analysis with T-Maps for Assemblies

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2018 .

Robot Workspace of a Tool Plane: Part 1—A Ruled Surface and Other Geometry

Joseph K. Davidson, K. H. Hunt, 1987 .

Influence of form on Tolerance-Map-generated frequency distributions for 1D clearance in design

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2010 .

Probability Tolerance Maps: A New Statistical Model for Non-Linear Tolerance Analysis Applied to Rectangular Faces

Joseph K. Davidson, Jami J. Shah, Nadeem Shafi Khan, 2010 .

Statistical Tolerance Analysis With Sensitivities Established With Tolerance-Maps

Joseph K. Davidson, Jami J. Shah, Aniket N. Chitale, 2018, Volume 2B: 44th Design Automation Conference.

Areal Coordinates: The Basis of a Mathematical Model for Geometric Tolerances

Joseph K. Davidson, Jami J. Shah, S. Bhide, 2003 .

Generating T-Maps with the kinematic transformation to model manufacturing variations of parts with position tolerancing of cylinders

Joseph K. Davidson, Jami J. Shah, Nathan Kalish, 2018 .

Feature Cluster Algebra for Geometric Tolerancing

Joseph K. Davidson, Jami J. Shah, Yadong Shen, 2011 .

Tolerance-Maps Applied to a Point-Line Cluster of Features

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2007, DAC 2005.

The Effects of Different Specifications on the Tolerance-Maps for an Angled Face

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2004, DAC 2004.

Allocating Tolerances Statistically With Tolerance-Maps and Beta Distributions: The Target a Planar Face

Joseph K. Davidson, Jami J. Shah, Gaurav Ameta, 2005, DAC 2005.

A Survey of One Class of 7-Jointed Serially Connected Robots: Type-Synthesis to Obtain Controllably Dexterous Workspace

Joseph K. Davidson, 1989 .