Zhao‐Xia Guo

发表

Effect of ABS Rubber Content on the Localization of MWCNTs in PC/ABS Blends and Electrical Resistivity of the Composites

Yao Sun, Zhao-Xia Guo, J. Yu, 2010 .

Cocontinuous phase morphology for an asymmetric composition of polypropylene/polyamide 6 blend by melt mixing of polypropylene with premelted polyamide 6/organoclay masterbatch

Li Wang, J. Yu, Zhao‐Xia Guo, 2012 .

Preparation of polymer/silica composite nanoparticles bearing carboxyl groups on the surface via emulsifier‐free emulsion copolymerization

Jian Yu, Zhao-Xia Guo, Zeng Zhong, 2005 .

Construction of Aramid Engineering Materials via Polymerization‐Induced para‐Aramid Nanofiber Hydrogel

Zhao-Xia Guo, T. Qiu, Chun-yan Xie, 2021, Advanced materials.

High-Elongation Fiber Mats by Electrospinning of Polyoxymethylene

Xiang Ren, Yi-Zhang Chen, J. Yu, 2008 .

Effect of compounding sequence on the morphology of organoclay‐filled PA6/PP/MAPP blends

Li Wang, J. Yu, Zhao‐Xia Guo, 2011 .

Tailoring the morphology of polypropylene/polyamide 66 blend at an asymmetric composition by using organoclay and maleic anhydride grafted polypropylene

Li Wang, J. Yu, Zhao‐Xia Guo, 2014 .

Grafting of Poly(ethylene glycol)s onto Nanometer Silica Surface by a One‐Step Procedure

Zhao-Xia Guo, Ying Li, J. Yu, 2005 .

Study of Polystyrene and Acrylonitrile−Styrene Copolymer as Special β-Nucleating Agents To Induce the Crystallization of Isotactic Polypropylene

Zhiqiang Su, Mu Dong, J. Yu, 2007 .

Study of the crystallization behaviors of isotactic polypropylene with sodium benzoate as a specific versatile nucleating agent

J. Yu, Zhiqiang Su, Mu Dong, 2008 .

Highly efficient electrically conductive networks in carbon-black-filled ternary blends through the formation of thermodynamically induced self-assembled hierarchical structures

J. Yu, Qiyan Zhang, Bo-yuan Zhang, 2018 .

Improved electrical conductivity of TPU/carbon black composites by addition of COPA and selective localization of carbon black at the interface of sea-island structured polymer blends.

Jian Yu, Zhao-Xia Guo, Qiyan Zhang, 2017, Soft matter.

Preparation of POE/PS blends with fine particle sizes by diffusion and subsequent polymerization of styrene in POE pellets

J. Yu, Cheng-Huan Huang, Zhao‐Xia Guo, 2017, Chinese Journal of Polymer Science.

The influence of silane treatment on nylon 6/nano-SiO2 in situ polymerization

Zhao-Xia Guo, Jian Yu, O. Li, 2002 .

Effect of styrene–acrylonitrile on the electrical resistivity of polycarbonate/multiwalled carbon nanotube composites

Yao Sun, Zhao-Xia Guo, J. Yu, 2011 .

Preparation of Carboxyl‐Functionalized Polystyrene/Silica Composite Nanoparticles

Zhao-Xia Guo, Jian Yu, Zeng Zhong, 2004 .

Polypropylene/polystyrene blends prepared by diffusion and subsequent polymerization in polypropylene pellets after injection molding

J. Yu, Fang Chen, Zhao‐Xia Guo, 2016 .

Polymerization kinetics of styrene in isotactic polypropylene pellets and evolution of phase morphology during polymerization

J. Yu, Fang Chen, Zhao‐Xia Guo, 2016 .

Preparation of polyamide 6/polystyrene quasi-nanoblends by diffusion and subsequent polymerization of styrene in water-sorbed polyamide 6 pellets

Zhao-Xia Guo, Jian Yu, Cheng-Huan Huang, 2017 .

The effects of crystallization condition on the microstructure and thermal stability of istactic polypropylene nucleated by β‐form nucleating agent

Zhao-Xia Guo, Zhiqiang Su, Mu Dong, 2011 .

Effect of Glass Fibers with Different Surface Properties on the Morphology and Properties of Polyamide 6/Poly(butylene terephthalate) Blends

Jian Yu, Li Wang, Zhao‐Xia Guo, 2014 .

The influence of interphase on nylon‐6/nano‐SiO2 composite materials obtained from in situ polymerization

Jian Yu, Ying Li, Zhao‐Xia Guo, 2003 .

Effect of final heating temperature on crystallization of isotactic polypropylene nucleated with an aryl amide derivative as β-form nucleating agent

J. Yu, Mu Dong, M. Jia, 2011 .

EFFECT OF GLASS FIBER ON THE PROPERTIES OF ELECTRICALLY CONDUCTIVE POLYOXYMETHYLENE COMPOSITES: EFFECT OF GLASS FIBER ON THE PROPERTIES OF ELECTRICALLY CONDUCTIVE POLYOXYMETHYLENE COMPOSITES

J. Yu, Fei Xin, Bo-yuan Zhang, 2012 .

Polyesters from lignin. 1. The reaction of kraft lignin with dicarboxylic acid chlorides

A. Gandini, F. Pla, Zhao‐Xia Guo, 1992 .

Polyesters from lignin—2. The copolyesterification of kraft lignin and polyethylene glycols with dicarboxylic acid chlorides

A. Gandini, Zhao‐Xia Guo, 1991 .

Preparation and characterization of polyamide 66/montmorillonite nanocomposites with methyl methacrylate as cointercalation agent

Jian Yu, Zhao-Xia Guo, Qinghua Yang, 2008 .

The effect of organo‐montmorillonite on the compatibility and properties of nylon 66/polypropylene blend

J. Yu, Qinghua Yang, Zhao‐Xia Guo, 2010 .

Study of the assembled morphology of aryl amide derivative and its influence on the nonisothermal crystallizations of isotactic polypropylene

J. Yu, Zhao-Xia Guo, Zhiqiang Su, 2009 .

Effects of calcium carbonate and compounding sequence on the phase morphology and properties of maleic anhydride‐grafted polypropylene compatibilized polyamide 6/polypropylene blend

Li Wang, J. Yu, Zhao‐Xia Guo, 2013 .

Soluble eggshell membrane protein: preparation, characterization and biocompatibility.

Qiang Li, Jian Yu, Zhao-Xia Guo, 2004, Biomaterials.

Crystallization behavior and morphological development of isotactic polypropylene with an aryl amide derivative as β‐form nucleating agent

J. Yu, Zhiqiang Su, Mu Dong, 2008 .

LIGNINS AS MACROMONOMERS FOR POLYESTERS AND POLYURETHANES

Zhao-Xia Guo, A. Gandini, M. Belgacem, 2002 .

Direct Melt Extrusion Processing of Nylon 6/Clay Nanocomposites Based on Pristine Montmorillonite

Zhao-Xia Guo, Ying Li, J. Yu, 2005 .

Effect of electrically inert particulate filler on electrical resistivity of polymer/multi-walled carbon nanotube composites

Jian Yu, Ha-Da Bao, J. Yu, 2008 .

Poly(ethylene terephthalate)/carbon black composite fibers prepared by electrospinning

Z. Xiong, Jian Yu, Xiaodong Kong, 2015, Chinese Journal of Polymer Science.

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Zhao-Xia Guo, Xu-cheng Zhang, J. Yu, 2011 .

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

Zhao-Xia Guo, Jian Yu, Yi-Zhang Chen, 2010 .

Phase morphology and mechanical properties of the electrospun polyoxymethylene/polyurethane blend fiber mats

J. Yu, Yi-Zhang Chen, Pan Peng, 2009 .

Effects of Zinc oxide nanoparticles on the morphology and viscoelastic properties of polyamide 6/poly(butylene terephthalate) blends

Zhao-Xia Guo, Jian Yu, Li Wang, 2017, Chinese Journal of Polymer Science.

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Baohua Guo, Xinlin Tuo, Ziyi Xing, 2022, Journal of Applied Polymer Science.

Effect of glass fiber on the electrical resistivities of polyoxymethylene/maleic anhydride‐grafted polyethylene/multiwalled carbon nanotube composites

J. Yu, S. Nagai, Ling Xu, 2015 .

Morphology and Mechanical Properties of Polyamide 6/Polystyrene Blends Prepared by Diffusion and Subsequent Polymerization of Styrene in Polyamide 6 Pellets

J. Yu, Cheng-Huan Huang, Yin-Le Tan, 2018, Materials.

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Zhao-Xia Guo, Jian Yu, Yi-Zhang Chen, 2009 .

Preparation of crosslinked composite nanoparticles

Zhao-Xia Guo, Jian Yu, Wenfang Liu, 2005 .

Encapsulation of Nanometer CaCO3 by Polymer Network

Wen Liu, J. Yu, Zhao‐Xia Guo, 2005 .

Poly(vinylidene fluoride)/silica nanocomposite membranes by electrospinning

Zhao-Xia Guo, X. Xiong, Qiang Li, 2013 .

Modeling the electrical percolation of mixed carbon fillers in polymer blends

Z. Xiong, Zhao-Xia Guo, Jian Yu, 2014 .

Modeling of the Electrical Percolation of Mixed Carbon Fillers in Polymer-Based Composites

Yao Sun, Ha-Da Bao, Zhao-Xia Guo, 2009 .

Migration of MWCNTs during melt preparation of ABS/PC/MWCNT conductive composites via PC/MWCNT masterbatch approach

Z. Xiong, Yao Sun, Li Wang, 2013 .

Preparation of polypropylene/poly(styrene-co-(butyl methacrylate)) nanoblends by diffusion and subsequent copolymerization of monomers in isotactic polypropylene pellets

Jian Yu, Fang Chen, Haizhen Qiu, 2015, Chinese Journal of Polymer Science.

Preparation of CaCO3/Polystyrene Inorganic/Organic Composite Nanoparticles

Zhao-Xia Guo, Jian Yu, Jie Yu, 2001 .

Preparation of Functionalized Core-Shell Alumina/Polystyrene Composite Nanoparticles, 1

Zhao-Xia Guo, Jian Yu, Zeng Zhong, 2005 .

Preparation of epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles

Zhao-Xia Guo, Jian Yu, Zeng Zhong, 2004 .

Thrombin‐Loaded Poly(butylene succinate)‐Based Electrospun Membranes for Rapid Hemostatic Application

J. Xiong, Zhao-Xia Guo, Hui-Hui Cheng, 2018 .

Poly(lactic acid)/soluble eggshell membrane protein blend films: Preparation and characterization

Jian Yu, Zhao-Xia Guo, X. Xiong, 2010 .

Electrospinning of sodium alginate with poly(ethylene oxide)

P. Hu, Jian Yu, Jian-Wei Lu, 2006 .

Improved thermal conductivity of ceramic filler‐filled polyamide composites by using PA6/PA66 1:1 blend as matrix

J. Yu, Yangzi Gao, D. Yuan, 2017 .

Aramid-based electric heating films by incorporating carbon black

Zhao-Xia Guo, Baohua Guo, Yong Guo, 2023, Materials Today Communications.

Facile Preparation of Electromagnetic Interference Shielding Materials Enabled by Constructing Interconnected Network of Multi-walled Carbon Nanotubes in a Miscible Polymeric Blend

Zhao-Xia Guo, J. Yu, Baohua Guo, 2019, Chinese Journal of Polymer Science.

THERMAL DEGRADATION AND FLAME RETARDANCY OF CALCIUM ALGINATE FIBERS

Zhao-Xia Guo, Q. Ji, Yanzhi Xia, 2009 .

From Monomers to a Lasagna-Like Aerogel Monolith: An Assembling Strategy for Aramid Nanofibers.

Zhao-Xia Guo, T. Qiu, Chun-yan Xie, 2019, ACS nano.

Macroscopic-Scale Preparation of Aramid Nanofiber Aerogel by Modified Freezing-Drying Method.

T. Qiu, Chun-yan Xie, Xinlin Tuo, 2021, ACS nano.

Effects of Carbon Nanotubes on the Morphology and Properties of Uncompatibilized and Maleic Anhydride-grafted Polypropylene-compatibilized Polyamide 6/Polypropylene Blends

Li Wang, Zhao‐Xia Guo, Jian Yu, 2014 .

Electrical conductivity of carbon nanotube-filled miscible poly(phenylene oxide)/polystyrene blends prepared by melt compounding

Baohua Guo, Qiyan Zhang, Jingxian Wang, 2019, Composites Part B: Engineering.

Effects of the dispersion state and aspect ratio of carbon nanotubes on their electrical percolation threshold in a polymer

Z. Xiong, Yao Sun, Ha-Da Bao, 2013 .

Improved electrical conductivity of polymer/carbon black composites by simultaneous dispersion and interaction-induced network assembly

Jian Yu, Zhao-Xia Guo, Baohua Guo, 2019, Composites Science and Technology.

Aramid-based highly conductive composite films by incorporating graphene for electromagnetic interference shielding and Joule heating applications

X. Hao, Chun-yan Xie, Xinlin Tuo, 2023, Composites Science and Technology.

Robust and highly resilient waterborne polyurethane-based composite aerogels prepared by blending with aramid nanofibers

Zhao-Xia Guo, Baohua Guo, Chun-yan Xie, 2022, Composites Science and Technology.

High-temperature polymer conductors with self-assembled conductive pathways

Baohua Guo, Qiyan Zhang, Bo-yuan Zhang, 2020 .

Reducing water sorption of injection‐molded polyamide 6 bars by polymerization‐induced diffusion of styrene and grafting with polystyrene

Zhao-Xia Guo, J. Yu, Cheng-Huan Huang, 2018 .

ELECTRICAL PROPERTIES OF MULTIWALLED CARBON NANOTUBE/CARBON BLACK HYBRID FILLER FILLED POLYOXYMETHYLENE COMPOSITES: ELECTRICAL PROPERTIES OF MULTIWALLED CARBON NANOTUBE/CARBON BLACK HYBRID FILLER FILLED POLYOXYMETHYLENE COMPOSITES

Ha-Da Bao, He-liang Yin, Zhao‐Xia Guo, 2010 .