Katsuhiro Maekawa

发表

Development of Greentape for Stereolighography by the Mask Printing Method

Terutake Hayashi, Masashi Tamura, Kenichi Hanyu, 2004 .

Simulation Analysis of Three-Dimensional Continuous Chip Formation Processes (Part 2) -Influence of Tool Geometry in Turning High Manganese Steel-

Katsuhiro Maekawa, Hiroshi Ohhata, 1997 .

Simulation analysis of cutting performance of a three-dimensional cut-away tool

Katsuhiro Maekawa, Takeaki Kitagawa, Hiroshi Ohhata, 1994 .

Project-Based Manufacturing Engineering Practice at Ibaraki University and Its Outcomes

Katsuhiro Maekawa, Kazuhiko Yamasaki, Dong F. Wang, 2012 .

Burr Formation and Deburring in Drilling Cross Holes.

Katsuhiro Maekawa, Ryoji Murata, Ikuya Ohshima, 1993 .

Development of high value-added affective shape design system using 1/f fluctuation

Katsuhiro Maekawa, 2010 .

Finite Element Analysis of Thermal Behaviour in Metal Machining : 1st Report, Influence of Thermophysical Properties on Cutting Temperature

Yoshihiro Nakano, Katsuhiro Maekawa, Takeaki Kitagawa, 1996 .

21410 Packaging of Electronic Modules through Dry Process

Katsuhiro Maekawa, 2008 .

Case studies of troubleshooting in connection with uncontrollable chips

Katsuhiro Maekawa, I. Ohshima, Y. Nakano, 1996 .

Stereolithography for Kansei Texture Based on FFT Spectrum Data

Yoshiaki Watanabe, Terutake Hayashi, Katsuhiro Maekawa, 2004 .

Simulation analysis of machinability of leaded CrMo and MnB structural steels

Tom Childs, Katsuhiro Maekawa, Hiroshi Ohhata, 1996 .

Rapid Prototyping of Affective Shape with 1/f Fluctuation Characteristics

Terutake Hayashi, Katsuhiro Maekawa, Tomohiro Nishii, 2003 .

Laser Microfabrication Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Ibaraki University

Katsuhiro Maekawa, 2014 .

Simulation Analysis of Three-Dimensional Continuous Chip Formation Processes (Part 1) - Finite Element Formulation and Experimental Verification -

Katsuhiro Maekawa, Takeaki Kitagawa, Masafumi Maeda, 1997 .

High-throughput fulorescence detection on DNA microarray by using multispot LCD scanner

Terutake Hayashi, Akio Nakamura, Katsuhiro Maekawa, 2004 .

Shape Design Using 1/F Fluctuation Characteristics

Katsuhiro Maekawa, 2009 .

Special Issue on CAE Application Technology in Cutting. Two-Dimensional Machining Simulation.

Takahiro Shirakashi, Katsuhiro Maekawa, 1994 .

Efforts to a Creative Manufacturing Education in the Faculty of Engineering in Ibaraki University

Mitsuru Konno, Katsuhiro Maekawa, Nobuhide Itoh, 2007 .

Finite Element Analysis of Thermal Behaviour in Metal Machining : 2nd Report, Determination of Energy Balance and Its Application to Three-Dimensional Analysis

Yoshihiro Nakano, Katsuhiro Maekawa, Takeaki Kitagawa, 1996 .

Shape Design for Making Our Life Comfortable

Katsuhiro Maekawa, 2009 .

Development of Environmentally Friendly Greentape for GTLS Method

Terutake Hayashi, Katsuhiro Maekawa, Banzragch Batsaikhan, 2002 .

511 Study on Environmentally Conscious Machining : 1st Report Dry Drilling

Makoto Kimura, Katsuhiro Maekawa, Akira Kurumada, 2001 .

Recent Progress of Computer Aided Simulation of Chip Flow and Tool Damage in Metal Machining

Toshiyuki Obikawa, T. Shirakashi, Katsuhiro Maekawa, 1996 .

Design of a Three-Dimensional Cut-away Tool for the Turning of High Manganese Steels

Akihiko Kubo, Katsuhiro Maekawa, Takeaki Kitagawa, 1994 .

Computer simulation of three-dimensional machining with cut-away tools

Katsuhiro Maekawa, Takeaki Kitagawa, Hiroshi Ohhata, 1995 .

Finite element simulation of chip flow in metal machining

Tom Childs, Katsuhiro Maekawa, M. H. Dirikolu, 2001 .

Simulation Analysis of Three-Dimensional Continuous Chip Formation Processes (1st Report)

Katsuhiro Maekawa, Hiroshi Ohhata, K. Maekawa, 1996 .

Laser Micro Fabrication Using Green Tape.

Katsuhiro Maekawa, Satoshi Kokura, Ikuya Ohshima, 1998 .

Friction characteristics at tool-chip interface in steel machining

Tom Childs, Katsuhiro Maekawa, Takeaki Kitagawa, 1997 .

Laser-sintered Porous Structures for Samarium-based Solid Oxide Fuel Cells

Masashi Koizumi, Katsuhiro Maekawa, Kazuhiko Yamasaki, 2014 .

FABRICATION OF METAL-BONDED GRINDING/POLISHING TOOLS BY THE GREENTAPE LASER SINTERING METHOD

Katsuhiro Maekawa, I. Ohshima, Y. Yokoyama, 1999 .

Mechanical Properties of Ti–6Al–4V Titanium Alloy with Submicrocrystalline Structure Produced by Severe Plastic Deformation

Katsuhiro Maekawa, K. Maekawa, S. Zherebtsov, 2005 .

Simulation Analysis of Three-Dimensional Continuous Chip Formation Processes (Part 3) -Influence of Physical Properties of Work and Tool Materials-

Katsuhiro Maekawa, Hiroshi Ohhata, 1997 .

Plasma hot machining for new engineering materials

Katsuhiro Maekawa, K. Maekawa, T. Kttagawa, 1990 .

Selective Laser Sintering Method Using Titanium Powder Sheet Toward Fabrication of Porous Bone Substitutes

Terutake Hayashi, Katsuhiro Maekawa, Masashi Tamura, 2005 .

Study on Analytical Prediction of Cutting Tool Life (3rd Report)

Toshiyuki Obikawa, Eiji Usui, Takahiro Shirakashi, 1982 .

Drop-on-Demand Laser Sintering With Silver Nanoparticles for Electronics Packaging

Hiroshi Saito, Katsuhiro Maekawa, Kazuhiko Yamasaki, 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

A Friction Model for Free-Machining Steels and Its Applicability to Machinability Analysis

T.H.C. Childs, Akihiko Kubo, Katsuhiro Maekawa, 2001 .