Augusto Della Torre

发表

Automatic Mesh Generation for CFD Simulations of Direct-Injection Engines

Tommaso Lucchini, Augusto Della Torre, Gianluca D'Errico, 2015 .

Comparison of Numerical and System Dynamics Methods for Modeling Wave Propagation in the Intake Manifold of a Single-Cylinder Engine

Yann Guezennec, Augusto Della Torre, Marcello Canova, 2013 .

Development and Application of 3D Generic Cells to the Acoustic Modelling of Exhaust Systems

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2011 .

Coupled 1D-quasi3D fluid dynamic models for the simulation of IC engine intake and exhaust systems

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2017 .

A 1D/Quasi-3D Coupled Model for the Simulation of I.C. Engines: Development and Application of an Automatic Cell-Network Generator

Augusto Della Torre, T. Cerri, Gianluca Montenegro, 2017 .

CFD Investigation of the Effect of Fluid-Structure Interaction on the Transmission Loss of ICE Silencers

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2016 .

Geometric and Fluid-Dynamic Characterization of Actual Open Cell Foam Samples by a Novel Imaging Analysis Based Algorithm

Gian Marco Bianchi, Stefania Falfari, Augusto Della Torre, 2017 .

Fluid Dynamic Optimization of a Moto3 TM Engine by Means of 1D and 1D-3D Simulations

Augusto Della Torre, Gianluca Montenegro, Marco Fiocco, 2016 .

CFD Simulation of a Sliding Vane Expander Operating Inside a Small Scale ORC for Low Temperature Waste Heat Recovery

Augusto Della Torre, Angelo Onorati, Gerd Schlager, 2014 .

Multi-Scale CFD Modeling of Plate Heat Exchangers Including Offset-Strip Fins and Dimple-Type Turbulators for Automotive Applications

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2019, Energies.

Churning power losses of ordinary gears: a new approach based on the internal fluid dynamics simulations

Augusto Della Torre, Carlo Gorla, Franco Concli, 2015 .

Evaluating the Performance of a Rotary Vane Expander for Small Scale Organic Rankine Cycles Using CFD tools

Augusto Della Torre, Marco Fiocco, Angelo Onorati, 2014 .

Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational Effort

Augusto Della Torre, Carlo Gorla, Franco Concli, 2014 .

Macchina a ciclo Stirling

Augusto Della Torre, Gianluca Montenegro, 2014 .

1D-3D Coupled Simulation of the Fuel Spray Propagation Inside the Air-Box of a Moto3 Motorbike: Analysis of Spray Targeting and Injection Timing

Augusto Della Torre, Marco Fiocco, T. Cerri, 2017 .

Design of Catalytic Devices by Means of Genetic Algorithm: Comparison Between Open-Cell Foam and Honeycomb Type Substrates

Federico Brusiani, Gian Marco Bianchi, Stefania Falfari, 2016 .

The 3Dcell Approach for the Acoustic Modeling of After-Treatment Devices

Antonio J. Torregrosa, Augusto Della Torre, Angelo Onorati, 2011 .

A Quasi-3D Model for the Simulation of the Unsteady Flows in I.C. Engine Pipe Systems

Augusto Della Torre, T. Cerri, Angelo Onorati, 2012 .

Fluid Dynamic and Acoustic Optimization Methodology of a Motorbike Intake Airbox Using Multilevel Numerical CFD Models and Experimental Validation Tests

Augusto Della Torre, T. Cerri, Giulio Lenzi, 2013 .

Performance of randomized Kelvin cell structures as catalytic substrates: Mass-transfer based analysis

Dimos Poulikakos, Augusto Della Torre, Gianluca Montenegro, 2014 .

Comparison of geometrical, momentum and mass transfer characteristics of real foams to Kelvin cell lattices for catalyst applications

Augusto Della Torre, Gianluca Montenegro, Rolf Kaufmann, 2017 .