Hiromu Hashimoto

发表

WeB-4-4 AERODYNAMIC CHARACTERISTICS OF FLEXIBLE WING FOR MICRO AIR VEHICLE IN GLIDING AND FLAPPING FLIGHT

Hisayoshi Naka, Hiromu Hashimoto, 2015 .

Optimization of Oil Flow Rate and Oil Film Temperature Rise in High Speed Hydrodynamic Journal Bearings

Hiromu Hashimoto, 1998 .

Prediction Model of Traction Based on Contact Mechanics between Paper-web and Steel Roller (1st Report, Theoretical Modeling with Experimental Verifications)

Hiromu Hashimoto, Masashi Sasaki, 2007 .

B-2-2 小型空気軸受のロバスト最適設計

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2014 .

Optimum Winding Tension and Nip-Load into Wound Webs for Protecting Wrinkles and Slippage

Hiromu Hashimoto, Puttha Jeenkour, Mongkol Mongkolowongrojn, 2011 .

Biomimetics Research on Flying Insects for Developing High Performance, Small-Sized Actuator

Hiromu Hashimoto, 2002 .

Experimental Studies on High Efficiency Flow Straightener for Fire Extinguishing Equipment

Hiromu Hashimoto, Katsumi Aoki, Hiroshi Ibaraki, 2011 .

Fundamental study on fabrication of flexible devices using roll to roll printing technology

Hiromu Hashimoto, Yuta Ikeda, Yuta Sunami, 2018 .

Study on angular displacement characteristics on topological optimum design problem of hydrodynamic thrust air bearing

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2014 .

Optimization of Winding Condition and Internal Stress Analysis of Wound Roll Considering Thermo-Viscoelastic Property and Web Thickness Distribution on thin web.

Hiromu Hashimoto, Yuta Sunami, Takahiro Imai, 2016 .

Optimization of winding conditions considering web thickness variation in width direction and experimental verification

Hiromu Hashimoto, Yuta Sunami, 2015 .

Optimum Design of Magnetic Head Slider Considering Static and Dynamic Flying Characteristics. General Methodology and Its Application to Taper-Flat Type Sliders.

Hiromu Hashimoto, Yasuhisa Hattori, 2000 .

Improvement of Web Spacing and Friction Characteristics by Two Types of Stationary Guides

Hiromu Hashimoto, Haruyasu Nakagawa, 2001 .

FMF-13 PREVENTION OF WOUND ROLL DEFECT OF COATED WEB(Flexible Media Feeding and Handling Machines IV,Technical Program of Oral Presentations)

Hiromu Hashimoto, Toshimitsu Kanda, Shoko Akemine, 2009 .

Development of Externally Pressurized Thrust Bearing for High Expansion Ratio Expander

Hiromu Hashimoto, Nobumi Ino, Akito Machida, 1992 .

F-0419 Study on Static and Dynamic Characteristics in Several Types of High Speed Gas Film Thrust Bearings : 1st Report, Theory

Hiromu Hashimoto, Masashi Honma, Atsunori Akahane, 2001 .

Improvement of Water Nozzle Shape for Fire Protection Based on Optimum Design(Machine Elements, Design and Manufacturing)

Hiromu Hashimoto, Hiroshi Ibaraki, 2009 .

Robust Optimum Design of Fluid Dynamic Bearing for 2.5 Inch HDD Using Statistical Method

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2011 .

The effects of O-ype cavitation on the performance characteristics of turbulent journal bearings

Hiromu Hashimoto, 1991 .

Ride Comfort Performance Improvement of Electric Vehicle (EV) Conversion Using SAS-Controlled Active Suspension System

Hiromu Hashimoto, Takeshi Inaba, Hishamuddin Jamaluddin, 2014 .

Experimental Study of Porous Foil Bearings for Web-handling

Hiromu Hashimoto, 1998 .

Stability Improvement of Noncircular Journal Bearings : Part1,Theoretical Analysis

Hiromu Hashimoto, Kotaro Matsumoto, 2002 .

1101 トンボの翅の断面形状と揚力生成の関係(機構の開発)

Hiromu Hashimoto, Fuma Sakai, 2014 .

HDI-09 APPLICATION OF SQP METHOD IN DESIGNING THRUST AIR BEARING FOR HARD DISK DRIVE SPINDLE MOTOR(Head/Disk Interface and Tribology III,Technical Program of Oral Presentations)

Masayuki Ochiai, Hiromu Hashimoto, M. D. Ibrahim, 2009 .

Prediction Model of Traction Based on Contact Mechanics Between Paper-web and Steel Roller (2nd Report, Traction Characteristics for Circumferentially Grooved Roller)

Hiromu Hashimoto, Hiroto Kawanishi, 2007 .

Roll-to-Roll Transportation Technology of High Functional Materials

Hiromu Hashimoto, Shinji Hikita, 2012 .

Air Film Thickness Estimation in Web Handling Processes

Hiromu Hashimoto, H. Hashimoto, 1999 .

Experimental Study on the Stabilization of Small-Bore Journal Bearings by Controlling Starved Lubrication and Bearing Orientation Angle

Hiromu Hashimoto, Masayuki Ochiai, 2009 .

S161014 Experimental Study on Preventing Effect of Web Defects on Shape of Concaved Roller

Hiromu Hashimoto, Katsuhisa Yamaguchi, 2012 .

Experimental Study of Stabilisation of Small Size Journal Bearing With Oil Supply Groove by Using Starved Lubrication and Bearing Orientation Angle Change

Hiromu Hashimoto, Masayuki Ochiai, 2007 .

A Study of the Characteristic Analysis of High-speed Journal Bearings : Optimum Design of Journal Bearings : Vibration, Control Engineering, Engineering for Industry

Hiromu Hashimoto, Yoshinori Kato, 1987 .

A Study on Spacing Height of Foil in Web Handling Systems

Hiromu Hashimoto, Yoshio Sagawa, 1997 .

Stability Improvement of Noncircular Journal Bearings : Part2,Experimental Analysis

Hiromu Hashimoto, Kotaro Matsumoto, 2002 .

Ride and handling performance improvement of electric vehicle conversion using active suspension system

Hiromu Hashimoto, Takeshi Inaba, Pakharuddin Mohd. Samin, 2011 .

Optimum design of high-speed, short journal bearings by mathematical programming

Hiromu Hashimoto, H. Hashimoto, 1997 .

Intelligent Winding Machine of Plastic Films for Preventing Both Wrinkles and Slippages

Hiromu Hashimoto, 2016 .

Optimum Design of Finite Width High Speed Journal Bearings by Mathematical Programming

Hiromu Hashimoto, Tomohiro Imai, 1996 .

Squeeze Film Characteristics between Parallel Circular Plates Containing a Single Central Air Bubble. Numerical Results Based on Nonlinearized Theory.

Hiromu Hashimoto, Mongkol Mongkolwongrojn, 1992 .

Optimum Winding Tension and Nip-load into Wound Webs for Protecting Wrinkles and Slippage

Hiromu Hashimoto, Puttha Jeenkour, Mongkol Mongkolowongrojn, 2010 .

Optimization of Groove Geometry for Thrust Air Bearing to Maximize Bearing Stiffness

Hiromu Hashimoto, Masayuki Ochiai, 2008 .

Effect of Film Thickness Distribution on Internal Stress of Wound Roll

Hiromu Hashimoto, Kazuhisa Yoda, 2013 .

G1101-3-3 Sensitivity Analysis of Geometry Error of Optimized Spiral Grooved Bearings

Masayuki Ochiai, Hiromu Hashimoto, Tomonobu Takahashi, 2009 .

Optimum Design of Thrust Air Bearing for Hard Disk Drive Spindle Motor

Masayuki Ochiai, Hiromu Hashimoto, M. D. Ibrahim, 2010 .

FMF-14 OPTIMUM WINDING TENSION AND NIP-LOAD INTO WOUND WEBS FOR PROTECTING WRINKLES AND SLIPPAGE(Flexible Media Feeding and Handling Machines IV,Technical Program of Oral Presentations)

Hiromu Hashimoto, Puttha Jeenkour, Mongkol Mongkolwongrojn, 2009 .

Theoretical Analysis and Optimum Design of High Speed Gas Film Thrust Bearings (1st Report, Static and Dynamic Characteristic Analysis with Experimental Verifications)

Masayuki Ochiai, Hiromu Hashimoto, 2006 .

Mechanism of Paper Handling "Printing Machinery"

Hiromu Hashimoto, Masashi Sasaki, Masakazu Akatsuka, 2005 .

Optimization of winding conditions for preventing roll defects caused by thermo-viscoelastic property and its experimental verification

Hiromu Hashimoto, Yuta Sunami, 2016 .

Web Handling Technology Applied to Mass Production of High-Functional Films

Hiromu Hashimoto, 2014 .

Piston-Ring Lubrication Problems for Refrigeration Compressors Considering Combined Effects of Supply Oil Quantity and Surface Roughness

Hiromu Hashimoto, H. Nakai, N. Ino, 1996 .

Theoretical Analysis and Optimum Design of High Speed Air Film Thrust Bearings

Hiromu Hashimoto, Masayuki Ochiai, 2007 .

Clean and Non-contact Transportation Technology. Web Transportation Technology Using Air Bearing Systems.

Hiromu Hashimoto, 1997 .

Study on Improvement of Stability of Noncircular Journal Bearings : Stability Analysis for Various Bearing Orientation Angles

Hiromu Hashimoto, Kotaro Matsumoto, 2004 .

Improvement of the Static and Dynamic Characteristics of Magnetic Head Sliders by Optimum Design

Hiromu Hashimoto, Yasuhisa Hattori, H. Hashimoto, 2000 .

Active suspension system in improving ride and handling performance of electric vehicle conversion

Hiromu Hashimoto, Takeshi Inaba, Pakharuddin Mohd. Samin, 2012 .

E-1-1 Fabrication of Artificial Wing Suitable for MAV Modeled on Dragonfly

Hisayoshi Naka, Hiromu Hashimoto, 2014 .

Evaluations and Improvement of Ride Comfort Performance of Electric Vehicle Conversion

Hiromu Hashimoto, Saiful Anuar Abu Bakar, Ryosuke Masuda, 2011 .

A study of the characteristic analysis of high speed journal bearings. Optimum design of journal bearings.

Hiromu Hashimoto, Yoshinori Kato, 1986 .

Theoretical Analysis and Optimum Design of High Speed Gas Film Thrust Bearings (2nd Report, Application to Optimum Design Problem)

Hiromu Hashimoto, Masayuki Ochiai, Tadashi Nanba, 2006 .

3042 Experimental Verification of High-speed Thrust Air Bearings Optimized by Two Types of Objective Functions

Hiromu Hashimoto, Tadashi Nanba, Fumio Takeuchi, 2007 .

Fuzzy semi-active damping force estimator (fSADE) and skyhook semi-active suspension systems

Hiromu Hashimoto, Takeshi Inaba, Pakharuddin Mohd. Samin, 2011 .

Development of the Artificial Wing Suitable for Flapping Micro Air Vehicle Based on Dragonfly Wing

Hisayoshi Naka, Hiromu Hashimoto, Yuta Sunami, 2014 .

Experimental Study of Safety Supply Flow Rate on Small Bore Journal Bearing

Hiromu Hashimoto, Masayuki Ochiai, Yuta Naruse, 2013 .

Experimental Study on Preventing Web Defects Under Transportation of High Performance Optical Films With Micro-Groove and Concave Rollers

Hiromu Hashimoto, 2011 .

Stabilization Method for Small-Bore Journal Bearings Utilizing Starved Lubrication

Hiromu Hashimoto, Masayuki Ochiai, 2010 .

Air Leaking Effect in Winding on In-Roll Stress Analysis of Wound Roll(Machine Elements, Design and Manufacturing)

Hiromu Hashimoto, Toshimitsu Kanda, Shoko Akemine, 2010 .

Robust Optimum Design of Fluid Dynamic Bearing for Hard Disk Drive Spindle Motors

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2012 .

Optimum Design of Small Size Fluid Film Thrust Bearing Considering the Productivity

Hiromu Hashimoto, Yuta Sunami, 2010 .

Effects of Foil Bending Rigidity on Spacing Height Characteristics of Hydrostatic Porous Foil Bearings for Web Handling Processes

Hiromu Hashimoto, 1997 .

Theoretical Analysis of Externally Pressurized Porous Foil Bearings—Part I: In the Case of Smooth Surface Porous Shaft

Hiromu Hashimoto, 1995 .

B-1-5 揺動外乱を受ける小型HDDスピンドルの振動応答評価法の検討

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2014 .

Optimum Design of Elliptical Journal Bearings for Remarkable Improvement of the Static and Dynamic Characteristics.

Hiromu Hashimoto, Kotaro Matsumoto, 2000 .

Study of Continuous Creation Technology and Advanced Function of Nanosheets

Hiromu Hashimoto, Yuta Sunami, Shinichi Tajima, 2018 .

Aerodynamic Force Measurement of Dragonfly’s Flight

Hiromu Hashimoto, Yutaro Kawamura, 2013 .

Preface for Special Issue of Future Development Based on Roll to Roll Printed Electronics

Hiromu Hashimoto, 2012 .

Experimental Study on Friction Characteristics between Plastic Film and Steel Roller

Hiromu Hashimoto, Yuta Sunami, Yasushi Fujiwara, 2014 .

MoF-3 THE FUTURE OF FLEXIBE SHEET MEDIA HANDLING TECHNOLOGY

Hiromu Hashimoto, Kazushi Yoshida, Yuta Sunami, 2015 .

Optimum Design of Fluid Film Bearing for HDD Spindle Considering the Tolerances

Hiromu Hashimoto, Yuta Sunami, Masayuki Ochiai, 2010 .

3204 In-roll Stress Analysis and Optimization of Winding Tension in Wound Roll of Films

Hiromu Hashimoto, Hiroto Kawanishi, 桐部繁嘉, 2007 .

Optimization of Winding Condition and Internal Stress Analysis of Wound Roll Considering Thermo-Viscoelastic Property and Web Thickness Distribution

Hiromu Hashimoto, Yuta Sunami, Takahiro Imai, 2016 .

Review of Activities of Research Committee of Technologies and Theory for Flexible Media Handling

Hiromu Hashimoto, Kazushi Yoshida, Shigeo Yanabe, 2009 .

Improvement of Slippage and Wrinkling of Transporting Webs Using Micro-Grooved Rollers

Hiromu Hashimoto, Shinji Hikita, 2011 .

Improvement of Slippage and Wrinkling of Transporting Webs Using Micro-Grooved Rollers

Hiromu Hashimoto, Shinji Hikita, 2010 .

Friction characteristics between paper and steel roller under mixed lubrication

Hiromu Hashimoto, 2012 .

Turbulent Lubrication Theory Using the Frictional Law : 2nd Report, Its Application to Journal Bearings

Hiromu Hashimoto, Sanae Wada, 1978 .

Performance Characteristics of Elliptical Journal Bearings in Turbulent Flow Regime

Hiromu Hashimoto, Sanae Wada, Hiroaki Tsunoda, 1984 .

Characteristics of Air Film Thickness and Flow Visualization for Transporting Film

Hiromu Hashimoto, Katsumi Aoki, 2010 .

Theoretical and Experimental Investigations Into Spacing Characteristics Between Roller and Three Types of Webs With Different Permeabilities

Hiromu Hashimoto, M. Okajima, 2006 .

Turbulent Lubrication Theory Using the Frictional Law : 1st Report, Derivation of Turbulent Coefficients and Lubrication Equation

Hiromu Hashimoto, Sanae Wada, 1978 .

Performance Characteristics of Large Scale Tilting-pad Journal Bearings

Hiromu Hashimoto, Sanae Wada, Takashi Marukawa, 1985 .

Deformation behavior of dragonfly-inspired nodus structured wing in gliding flight through experimental visualization approach

Hiromu Hashimoto, Yuta Sunami, Sheng Zhang, 2018, Scientific Reports.

Dynamic characteristic analysis of short elliptical journal bearings in turbulent inertial flow regime

Hiromu Hashimoto, H. Hashimoto, 1992 .

An application of short bearing theory to dynamic characteristic problems of turbulent journal bearings

Hiromu Hashimoto, Sanae Wada, Jin-ichi Ito, 1987 .

Theoretical Approach to Turbulent Lubrication Problems Including Surface Roughness Effects

Hiromu Hashimoto, Sanae Wada, 1989 .

Theoretical and Experimental Investigation into Generation of Wrinkling and Slip in Plastic-Films under Transportation

Hiromu Hashimoto, 2010 .

Turbulent Lubrication of Tilting-Pad Thrust Bearings With Thermal and Elastic Deformations

Hiromu Hashimoto, Sanae Wada, H. Hashimoto, 1985 .