Phil E. Irving

发表

Reliability prediction of helicopter transmission systems using stress-strength interference with underlying damage accumulation

J. E. Strutt, K. Allsopp, C. S. Place, 1999 .

The Integrated Vehicle Health Management Development Process: Verification and Validation of Simulation Models

Octavian Niculita, Ian K. Jennions, Phil E. Irving, 2013 .

Development of fatigue cracks from mechanically machined scratches on 2024‐T351 aluminium alloy—Part II: finite element analysis and prediction method

Phil E. Irving, Andrea Cini, P. Irving, 2017 .

Electrical potential techniques for damage sensing in composite structures

Ian M. Sturland, Phil E. Irving, Chinniah Thiagarajan, 1994, Other Conferences.

The contribution of fatigue usage monitoring systems to life extension in safe life and damage tolerant designs

Mark Strathern, J. E. Strutt, Phil E. Irving, 1999, The Aeronautical Journal (1968).

A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears

David, C. K. Tan, Phil E. Irving, 2007 .

The Development of a Robust Crack Growth Model for Rotorcraft Metallic Structures

Phil E. Irving, R. Cook, P. C. Wood, 2000 .

Safety Factors in Civil Aircraft Design Requirements

Phil E. Irving, John W. Bristow, P. Irving, 2007 .

Pseudo spackle pattern photography algorithm development and experimental calibration

Shan Fu, Domenico Furfari, Phil E. Irving, 2003, Other Conferences.

Use of COTS functional analysis software as an IVHM design tool for detection and isolation of UAV fuel system faults

Octavian Niculita, Ian K. Jennions, Phil E. Irving, 2012 .

Crack growth predictions in a complex helicopter component under spectrum loading

James C. Newman, Phil E. Irving, J. Lin, 2006 .

Damage detection in CFRP laminates using electrical potential techniques

N. Khemiri, Phil E. Irving, N. Angelidis, 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Technologies for damage tolerance in rotorcraft metallic structures

S. Jenkins, R. Cook, S. Rigden, 1996 .

Use of Bonded Crack Retarders to Improve Damage Tolerance of Wing Covers

Xiang Zhang, Michael E. Fitzpatrick, Phil E. Irving, 2014 .

Development of probability of detection data for structural health monitoring damage detection techniques based on acoustic emission

Jim McFeat, Phil E. Irving, Ian K. Jennions, 2013 .

Effect of resin and fibre properties on impact and compression after impact performance of CFRP

Phil E. Irving, P. Irving, Denis D.R. Cartié, 2002 .

Fail-safe design of integral metallic aircraft structures reinforced by bonded crack retarders

Giuliano Allegri, Phil E. Irving, Xiang Zhang, 2009 .

Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique

Phil E. Irving, Chinniah Thiagarajan, P. Irving, 1998 .

Detection and Monitoring of Fatigue Cracks in Metallic Structures Using Acoustic Emission: Routes to Quantification of Probability of Detection

Phil E. Irving, Daniel Gagar, P. Foote, 2014 .

Effects of loading and sample geometry on acoustic emission generation during fatigue crack growth: Implications for structural health monitoring

Phil E. Irving, Daniel Gagar, P. Foote, 2015 .

Corrosion pit size distributions and fatigue lives: a study of the EIFS technique for fatigue design in the presence of corrosion

Phil E. Irving, P. Irving, J. J Medved, 2004 .

Response to discussion of paper: The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain

Phil E. Irving, N. Angelidis, P. Irving, 2006 .

An experimental approach to quantify strain transfer efficiency of fibre bragggrating sensors to host structures

Ralph P. Tatam, Stephen W. James, Chen-Chun Ye, 2001 .

Exploitation of Structural Loads/Health Data for Reduced Life Cycle Costs

J. D. Cronkhite, Jayanth N. Kudva, G. F. Harrison, 1998 .

Fatigue crack acceleration effects during tensile underloads in 7010 and 8090 aluminium alloys

V. Zitounis, Phil E. Irving, P. Irving, 2007 .

AFM observation of surface topography of fibre Bragg gratings fabricated in germanium-boron codoped fibres and hydrogen-loaded fibres

Ralph P. Tatam, Stephen W. James, Chen-Chun Ye, 2002 .

Size effects on residual stress and fatigue crack growth in friction stir welded 2195-T8 aluminium – Part I: Experiments

Phil E. Irving, P. Irving, Yu E. Ma, 2011 .

The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain

Phil E. Irving, N. Angelidis, P. Irving, 2004 .

Residual Stress Effects and Fatigue Behavior of Friction-Stir-Welded 2198-T8 Al-Li Alloy Joints

Phil E. Irving, P. Irving, Yu E. Ma, 2011 .

Implications of substrate geometry and coating thickness on the cracking resistance of polymer-based protective coatings

Phil E. Irving, Lesley-Anne Wray, David Ayre, 2018 .

The influence of hydrogen loading and the fabrication process on the mechanical strength of optical fibre Bragg gratings

Ralph P. Tatam, Stephen W. James, Chen-Chun Ye, 2002 .

Detection of impact damage in CFRP laminates by means of electrical potential techniques

Phil E. Irving, N. Angelidis, P. Irving, 2007 .

Experimental and finite element study of the electrical potential technique for damage detection in CFRP laminates

Phil E. Irving, P. Irving, N. Khemiri, 2005 .

Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

Michael E. Fitzpatrick, Phil E. Irving, Xiang Zhang, 2011 .

Full-field Laser Shearography Instrumentation for the Detection and Characterization of Fatigue Cracks in Titanium 10-2-3

Ralph P. Tatam, Stephen W. James, Roger M. Groves, 2006 .

The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints

Phil E. Irving, P. Irving, G. Bussu, 2003 .

Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

Andrea Cini, Michael E. Fitzpatrick, Phil E. Irving, 2012 .