Adi Saptari

发表

Applying Clockwise and Counterclockwise Torque Directions in Pinch Grips: A Descriptive Study

Poh Kiat Ng, Ka Xuan Chai, Shiong Lung Leh, 2013 .

Establishment of Process Capability of Machine Centre Driling Using Multiple Regression Analysis

Adi Saptari, Halim Isa, M.A. Rahman, 2013 .

Enhancing Efficiency of Die Exchange Process Through Single Minute of Exchanging Die at a Textile Manufacturing Company in Malaysia

Mohd Amri Sulaiman, Abdul Samad Shibghatullah, Adi Saptari, 2015 .

Manpower Optimization and Process Efficiency Improvement at a Textile Manufacturing Company

Adi Saptari, Nor Akramin Mohamad, Rohana Abdullah, 2010 .

2309 Human Error and Production Rate Correlation in Assembly Process of Electronics Goods

Poh Kiat Ng, Adi Saptari, Jia Xin Leau, 2014 .

The effect of assembly design parameters on assembly time

Adi Saptari, Mohd Rizal Salleh, Effendi Mohamad, 2015 .

Relayout planning to reduce waste in food industry through simulation approach

Adi Saptari, Hayati Mukti Asih, Muhammad Faishal, 2017, AsiaSim 2017.

The Roles of Shape and Size in the Pinch Effort of Screw Knobs

Poh Kiat Ng, Ka Xuan Chai, Shiong Lung Leh, 2013 .

A review of shape and size considerations in pinch grips

Poh Kiat Ng, Adi Saptari, 2014 .

2313 Regaining Productivity Through Line Balancing : A Case Study in an Electrical Manual Assembly Line

Adi Saptari, Jia Xin Leau, Nor Akramin Mohamad, 2014 .

Roles of Pinch Grips in Different Knob Selections among Malaysian Manufacturing Workers

Poh Kiat Ng, Adi Saptari, Kian Siong Jee, 2015 .

Influences of Body Position Selections on Knob Selections in Malaysian Manufacturing Industries

Poh Kiat Ng, Adi Saptari, Kian Siong Jee, 2015 .

Torque Direction And Its Influence On Pinch Force In Loaded And Unloaded Conditions

Adi Saptari, Yue Hang Tan, Kiat Ng Poh, 2015 .

EFFECTS OF KNOB SELECTIONS ON WORK POSTURE SELECTIONS IN MANUFACTURING COMPANIES

Adi Saptari, Yue Hang Tan, Kiat Ng Poh, 2015 .

MMFD5033: Management Of Global Manufacturing Operations

Adi Saptari, 2010 .

Assessment Of Storage And Retrieval System In Bulk Storage Area

Adi Saptari, Fairul Azni Jafar, Ting Hui Chii Doris, 2015 .

The Effects of Office Equipment Familiarity in Reducing Human Errors and Accidents

Poh Kiat Ng, Adi Saptari, Jia Xin Leau, 2014 .

PRODUCTIVITY ANALYSIS TOWARDS LEAN MANUFACTURING AT A TEXTILE MANUFACTURING COMPANY

Adi Saptari, Nor Akramin Mohamad, Rohana Abdullah, 2009 .

Manufacturing Performance in Green Supply Chain Management

Kamaruzaman Jusoff, Mohd Nizam Ab Rahman, Zuhriah Ebrahim, 2013 .

A Plug Assembly Line: An Assessment of Workstation Design and Working Posture

Adi Saptari, Isa Halim, Seri Rahayu Kamat, 2007 .

Influences of Tactile Sensation on Pinch Force under Loaded and Unloaded Conditions

Poh Kiat Ng, Adi Saptari, Kian Siong Jee, 2015 .

The effect of time pressure, working position, component bin position and gender on human error in manual assembly line

Adi Saptari, Jia Xin Leau, Nor Akramin Mohamad, 2015, 2015 International Conference on Industrial Engineering and Operations Management (IEOM).

MTKA5213: Advanced Manufacturing And Service Management

Adi Saptari, 2011 .

SYNTHESIZING THE DOMAIN OF LEAN PRACTICES IN MANUFACTURING OPERATIONS: A REVIEW

Adi Saptari, Mohd Razali Muhamad, Muhamad Zaki Yusup, 2015 .

Reactive Scheduling of a Decentralized Multi-Objective Material Transportation Tasks in a Dynamic Job Shop Manufacturing System

Adi Saptari, Wan Ling Li, Fairul Azni Jafar, 2014 .

A review of different pinch techniques

Poh Kiat Ng, Meng Chauw Bee, Adi Saptari, 2014 .

Simulation Modeling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line

Adi Saptari, Halim Isa, Nor Akramin Mohamad, 2008 .

Ergonomics aspects of knob designs: a literature review

Poh Kiat Ng, Adi Saptari, Kian Siong Jee, 2015 .

SIMULATION STUDY IN REORGANIZING DISPATCHING LAYOUT TO MINIMIZE DISPATCHING TIME

Adi Saptari, Mohd Rizal Salleh, Saifudin Hafiz Yahaya, 2016 .

UPPER LIMB JOINTS AND MOTIONS SAMPLING SYSTEM USING KINECT CAMERA

Adi Saptari, A.S.H. Basari, Isa Halim, 2018 .

2409 An initiative to implement lean manufacturing usng value stream mapping in textile manufacturing company

Mohd Amri Sulaiman, Adi Saptari, Teruaki Ito, 2014 .

Performance evaluation of different types of particle representation procedures of Particle Swarm Optimization in Job-shop Scheduling Problems

Adi Saptari, Nurul Izah Anuar, 2016 .

A Survey on Working Postures among Malaysian Industrial Workers

Adi Saptari, Isa Halim, Seri Rahayu Kamat, 2015 .

Optimizing Assembly Line Production through Line Balancing: A Case Study

Adi Saptari, Jia Xin Leau, M. Nor Akramin, 2015 .

Jig Design, Assembly Line Design and Work Station Design and their Effect to Productivity

Adi Saptari, Mohd Rizal Salleh, Soon Lai Wong, 2011 .

Ergonomic Design of CNC Milling Machine for Safe Working Posture

Adi Saptari, Halim Isa, Haeryip Sihombing, 2013 .

Synthesising the roles of torque and sensation in pinch force: a framework

Poh Kiat Ng, Adi Saptari, Jian Ai Yeow, 2014 .

Comparison between linear programming and integer linear programming: a review

Adi Saptari, Mei Lee Sam, Effendi Mohamad, 2018, Int. J. Math. Oper. Res..

The Conceptualisation and Development of a Space-Saving Multipurpose Table for Enhanced Ergonomic Performance

Poh Kiat Ng, Adi Saptari, Robert Jeyakumar Nathan, 2021, Inventions.

Pinch Effort Variations with Torque, Shape, Size, Sensation and Technique

Poh Kiat Ng, Ka Xuan Chai, Shiong Lung Leh, 2014 .

Analysis of Muscle Activity Using Surface Electromyography for Muscle Performance in Manual Lifting Task

Adi Saptari, Halim Isa, A. Rohana, 2014 .