A. Hart

发表

Activation of synovial fibroblasts from patients at revision of their metal-on-metal total hip arthroplasty

J. Shelton, A. Nyga, Alister J. Hart, 2020, Particle and fibre toxicology.

Fretting and Corrosion Between a Metal Shell and Metal Liner May Explain the High Rate of Failure of R3 Modular Metal-on-Metal Hips.

G. Blunn, J. Skinner, R. Whittaker, 2017, The Journal of arthroplasty.

Morphometric analysis of patient-specific 3D-printed acetabular cups: a comparative study of commercially available implants from 6 manufacturers

J. Henckel, H. Hothi, A. Di Laura, 2022, 3D Printing in Medicine.

Reference values for volume, fat content and shape of the hip abductor muscles in healthy individuals from Dixon MRI

J. Henckel, M. Belzunce, A. Di Laura, 2021, NMR in biomedicine.

Mid-life cyclists preserve muscle mass and composition: a 3D MRI study

J. Henckel, M. Belzunce, L. M. Horga, 2023, BMC Musculoskeletal Disorders.

3D Printed Acetabular Cups for Total Hip Arthroplasty: A Review Article

J. Henckel, H. Hothi, Hart, 2019, Metals.

Pin Fracture in Magnetically Controlled Growing Rods: Influence of the Year of Manufacture

J. Henckel, H. Hothi, Elisabetta Dal Gal, 2023, Journal of pediatric orthopedics.

The painful metal-on-metal hip resurfacing.

J. Henckel, J. Cobb, A. Hart, 2009, The Journal of bone and joint surgery. British volume.

Retrieval analysis of metal and ceramic femoral heads on a single CoCr stem design

J. Henckel, M. Liow, A. Hart, 2017, Bone & joint research.

Which factors determine the wear rate of large-diameter metal-on-metal hip replacements? Multivariate analysis of two hundred and seventy-six components.

M. Porter, J. Cobb, P. Cann, 2013, The Journal of bone and joint surgery. American volume.

Blood titanium levels in patients with large and sliding titanium implants

J. Henckel, H. Hothi, P. Gikas, 2022, BMC Musculoskeletal Disorders.

The painful metal-on-metal hip resurfacing.

J. Henckel, J. Cobb, S. Sabah, 2009, The Journal of bone and joint surgery. British volume.

The treatment of unstable, extracapsular hip fractures with the AO/ASIF proximal femoral nail (PFN)--our first 60 cases.

A. Hart, H. Banan, A. Al-Sabti, 2002, Injury.

The role of bone remodeling in measuring migration of custom implants for large acetabular defects.

J. Henckel, A. Hart, Anna Di Laura, 2024, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Statistical shape modeling of the large acetabular defect in hip revision surgery

J. Henckel, H. Hothi, S. De Angelis, 2023, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Rod Fracture in Magnetically Controlled Growing Spine Rods

J. Henckel, H. Hothi, Alister J. Hart, 2023, Journal of pediatric orthopedics.

Custom 3D-Printed Implants for Acetabular Reconstruction

J. Henckel, A. Di Laura, Alister J. Hart, 2023, JB & JS open access.

The analysis of defects in custom 3D‐printed acetabular cups: A comparative study of commercially available implants from six manufacturers

J. Henckel, H. Hothi, S. Bergiers, 2022, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Magnetic Resonance Imaging of the Hips of Runners Before and After Their First Marathon Run: Effect of Training for and Completing a Marathon

J. Henckel, A. Fotiadou, A. Hirschmann, 2021, Orthopaedic journal of sports medicine.

A retrieval analysis of the Precice intramedullary limb lengthening system

J. Henckel, A. Hart, J. Skinner, 2018, Bone & joint research.

The accuracy and precision of acetabular implant measurements from CT imaging

J. Henckel, R. Richards, H. Hothi, 2023, Frontiers in Bioengineering and Biotechnology.

Guiding prosthetic femoral version using 3D-printed patient-specific instrumentation (PSI): a pilot study

J. Henckel, A. Di Laura, Maria Moralidou, 2023, 3D Printing in Medicine.

Accuracy of a Three-Dimensional (3D)-Printed Patient-Specific (PS) Femoral Osteotomy Guide: A Computed Tomography (CT) Study

J. Henckel, H. Hothi, A. Di Laura, 2022, Bioengineering.

The in vivo location of edge-wear in hip arthroplasties

J. Henckel, H. Hothi, M. Belzunce, 2021, Bone & Joint Research.

Statistical Shape Modelling the In Vivo Location of Acetabular Wear in Retrieved Hip Implants

D. Raymont, J. Henckel, H. Hothi, 2022, Bioengineering.

Wear performance of retrieved metal-on-metal Pinnacle hip arthroplasties implanted before and after 2007

J. Henckel, A. Eskelinen, J. Skinner, 2018, Bone & joint research.

Predicting wear and blood metal ion levels in metal‐on‐metal hip resurfacing

P. Noble, J. Henckel, A. Hart, 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Assessment of the equivalence of a generic to a branded femoral stem

P. Shearing, J. Henckel, A. Hart, 2017, The Bone & Joint Journal.

Variation in taper surface roughness for a single design effects the wear rate in total hip arthroplasty

G. Blunn, A. Eskelinen, J. Skinner, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The relationship between the angle of version and rate of wear of retrieved metal-on-metal resurfacings: a prospective, CT-based study.

J. Henckel, J. Cobb, P. Cann, 2011, The Journal of bone and joint surgery. British volume.

Surveillance of Patients with Metal-on-Metal Hip Resurfacing and Total Hip Prostheses: A Prospective Cohort Study to Investigate the Relationship Between Blood Metal Ion Levels and Implant Failure.

J. Powell, A. Eskelinen, A. Hart, 2014, The Journal of bone and joint surgery. American volume.