C. G. Park

发表

Microscopic Investigation of the Strain Rate hardening for Auto-body Steel Sheet

H. Huh, J. H. Yoon, C. G. Park, 2008 .

Application of fractal dimension to optimum deposition of NiCrAlY coating by D-gun spray

C. G. Park, M. Kim, X. Ma, 1999 .

Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia thermal barrier coatings under hot corrosion

C. G. Park, J. Kim, Moojin Kim, 2005 .

Improved thermal stability of Ni silicide on Si (100) through reactive deposition of Ni

Sang Ho Oh, C. G. Park, Hong Koo Baik, 2003 .

Microstructure-property relations in WC-Co coatings sprayed from combinatorial Ni-plated and nanostructured powders

C. G. Park, J. Seol, M. Jafari, 2017 .

Microstructure and surface wear resistance in rapidly quenched Fe–Cr–B alloy spray coatings ☆

C. G. Park, M. Kim, H. Jin, 2001 .

Microstructure and amorphization induced by frictional work in Fe-Cr-B alloy thermal spray coatings

C. G. Park, M. Kim, H. Jin, 1999 .

Interface pullout properties of macrosynthetic fibres in latex modified cement based nanosilica and silica fume composites

C. G. Park, R. Oh, 2014 .

Microstructural and electrical investigations of Pd/Ge/Ti/Au ohmic contact to n‐type GaAs

C. G. Park, J. Kwak, C. Park, 1996 .

Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels

C. G. Park, J. Seol, Hyungmo Kim, 2017 .

The effects of tungsten addition on the toughness of modified 9Cr-Mo steels

C. G. Park, W. B. Lee, S. Hong, 2000 .

Improvement of the bending fatigue resistance of the hyper-eutectoid steel wires used for tire cords by a post-processing annealing

C. G. Park, Y. Yang, J. Bae, 2008 .

A study of threshold switching of NbO2 using atom probe tomography and transmission electron microscopy.

C. G. Park, S. Y. Lee, H. Hwang, 2015, Micron.

Effect oxygen exposure on the quality of atomic layer deposition of ruthenium from bis(cyclopentadienyl)ruthenium and oxygen

C. G. Park, Sang-Joon Park, W. Maeng, 2008 .

Strain-induced precipitation of NbC in Nb and Nb-Ti microalloyed HSLA steels

C. G. Park, K. Kang, S. Hong, 2002 .

Effect of cathodic charging on creep and tensile deformation of pure iron

C. G. Park, M. Meshii, J. Nagakawa, 1980 .

Reply to comments on “chemical driving force for dislocation motion in hydrogen embrittlement”

C. G. Park, J.C.M. Li, S. Ohr, 1987 .

Isothermal Treatment Effects on Precipitates and Tensile Properties of an HSLA Steel

C. G. Park, J. Seol, W. Choi, 2018, Metals and Materials International.

Atom probe tomography and nano secondary ion mass spectroscopy investigation of the segregation of boron at austenite grain boundaries in 0.5 wt.% carbon steels

C. G. Park, J. Seol, L. Renaud, 2011 .

Microstructural and mechanical characterizations of a novel HVOF-sprayed WC-Co coating deposited from electroless Ni–P coated WC-12Co powders

C. G. Park, M. Jafari, M. Jafari, 2013 .

Hot Corrosion Behavior of Yttria and Ceria Stabilized ZrO2 Thermal Barrier Coatings

C. G. Park, M. Kim, S. Park, 2003 .

Effect of aluminum oxide diffusion barrier layer on the oxidation behavior of detonation gun-sprayed thermal barrier coating at 1,200°C

C. G. Park, M. Kim, X. Ma, 1999 .

Microstructure and wear-resistance of Fe-Cr-B base metamorphic alloys

C. G. Park, M. Kim, Y. Rhyim, 1997 .

Interfacial reactions of Si/Co films on GaAs

C. G. Park, S. Noh, D. Shin, 1995, Journal of Materials Science Letters.

The interactions between Si/Co films and GaAs(001) substrates

S. I. Kim, C. G. Park, J. Kwak, 1994 .

Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe-Mn-Al-C allo

C. G. Park, J. Seol, C. Park, 2013 .

Decomposition of retained austenite during coiling process of hot rolled TRIP-aided steels

C. G. Park, S. D. Choi, S. Park, 2004 .

Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical prope

C. G. Park, J. Seol, C. Park, 2012 .

An integrated pearlite growth model based on growth ledge migration

C. G. Park, D. Lee, 1992 .

Effects of V on the Formation of Ti-Nb-V Cabonitrides and Mechanical Properties in Low Carbon HSLA Steels

C. G. Park, J. S. Kang, D. J. Kim, 2006 .

The effects of tungsten addition on the microstructural stability of 9Cr–Mo Steels

C. G. Park, S. Hong, W. Lee, 2001 .

Microscopic Investigation of the Strain Rate Hardening for Polycrystalline Metals

C. G. Park, H. Huh, J. Yoon, 2008 .

Study of vertical Si/SiO2 interface using laser-assisted atom probe tomography and transmission electron microscopy.

C. G. Park, J H Lee, B H Lee, 2014, Micron.

3D compositional characterization of Si/SiO2 vertical interface structure by atom probe tomography

C. G. Park, Y. T. Kim, J. H. Lee, 2013, Electronic Materials Letters.

Microscopic analysis of Fe–Cr alloy produced by single roll strip casting

C. G. Park, S. Das, J. Seol, 2011 .

Electromagnetic wave absorption properties of amorphous alloy-ferrite-epoxy composites in quasi-microwave band

C. G. Park, K. Lim, Keeley Lee, 2003 .

Theoretical expectation of strip thickness in planar flow casting process

C. G. Park, M. Kim, J. Sung, 1994 .

Amorphous phase formation of Zr-based alloy coating by HVOF spraying process

C. G. Park, H. J. Kim, B. Seong, 2001 .

The effect of Fe on the crystallization behavior of Al–Mm–Ni–Fe amorphous alloys

C. G. Park, H. Jin, Y. J. Kim, 2001 .

Mechanical properties and microstructure evolution of the nano WC-Co coatings fabricated by detonation gun spraying with post heat treatment

C. G. Park, Moojin Kim, S. Park, 2007 .

Magnetic properties of amorphous alloy strips fabricated by planar flow casting (PFC)

C. G. Park, Y. Hong, K. A. Lee, 2009 .

Development of nanocrystals in an amorphous alloy Zr47Ni30Ti23

C. G. Park, S. Yi, D. Kim, 2001 .

IN SITU TEM OBSERVATIONS OF CRACK TIP DISLOCATION BEHAVIORS UNDER A MIXED MODE LOADING

C. G. Park, Y. Chang, C. Lee, 1992 .

Effect of rapid set binder on early strength and permeability of HES latex modified road repair pre-packed concrete

C. G. Park, S. K. Lee, C. Yu, 2015 .

Influence of Nickel-Coated Nanostructured WC-Co Powders on Microstructural and Tribological Properties of HVOF Coatings

C. G. Park, M. Jafari, Chan‐Gyung Park, 2014, Journal of Thermal Spray Technology.

HfO2 / HfO x N y / HfO2 Gate Dielectric Fabricated by In Situ Oxidation of Plasma-Enhanced Atomic Layer Deposition HfN Middle Layer

C. G. Park, Taeyoon Lee, W. Maeng, 2009 .

Magnetic properties of melt quenched Ni–Fe alloy strips

C. G. Park, M. Kim, J. Namkung, 2004 .

Effect of Si Addition on Microstructure and Magnetic Properties of Permalloy Fabricated by Melt Drag Casting

C. G. Park, M. Kim, K. Lim, 2004 .

Inhomogeneity of a highly efficient InGaN based blue LED studied by three‐dimensional atom probe tomography

K. B. Nam, C. G. Park, Chan Gyung Park, 2009 .

Effects of growth pressure on the structural and optical properties of multi quantum wells (MQWs) in blue LED.

C. G. Park, G. Gu, D. Jang, 2013, Ultramicroscopy.

Measurement of the Residual Stress in the Steel Wires by using Focused Ion Beam and Digital Image Correlation Method

C. G. Park, Y. Yang, J. Bae, 2007 .

Effect of microstructural evolution on magnetic property of Mn-implanted p-type GaN

C. G. Park, J. M. Baik, Jong‐Lam Lee, 2003 .

MICROSTRUCTURAL INFLUENCE ON THE MECHANICAL PROPERTIES OF A Ti-10V-2Fe-3Al ALLOY

C. G. Park, Y. Chang, C. Lee, 1992 .

2-D & 3-D Observations on the Microstructure of Super Bainite TRIP Steels using Total Analysis System

C. G. Park, J. Seol, Byoung-ho Lee, 2010 .