Tatsuaki Furumoto

发表

Machined Workpiece Edge Shape Control by Laser Hardening - Optimizing Laser Scan Conditions and Cutter Paths -

Ryutaro Tanaka, Takashi Kito, Akira Hosokawa, 2010, Int. J. Autom. Technol..

Cut-off characteristic of CBN and diamond stick stones with pulsed YAG laser: laser cutting of superabrasive stone

Tatsuaki Furumoto, Takashi Ueda, Yoshinori Funada, 2004, International Symposium on Laser Precision Microfabrication.

S1330103 Studies on Turning of Difficult-to-machine Materials with Actively Driven Rotary Tool : Consideration of Optimum Tool Rotational Speed by Cutting Simulation

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2015 .

Cutting Characteristics of Binderless Diamond Tools in High-Speed Turning of Ti-6Al-4V - Availability of Single-Crystal and Nano-Polycrystalline Diamond -

Akira Hosokawa, Takashi Ueda, Tatsuaki Furumoto, 2016, Int. J. Autom. Technol..

Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel

Ryutaro Tanaka, Akira Hosokawa, Takashi Ueda, 2013, Int. J. Autom. Technol..

Hard Turning of Difficult-to-machine Materials with Actively Driven Rotary Tool (ADRT): —Proposition of reciprocating turning based on the fundamental cutting characteristics—

Akira Hosokawa, Tatsuaki Furumoto, Tomohiro Koyano, 2017 .

Editorial: Additive Manufacturing with Metals

Tatsuaki Furumoto, 2019, Int. J. Autom. Technol..

Formation Mechanism of Pores Inside Structure Fabricated by Metal-Based Additive Manufacturing

Akira Hosokawa, Tatsuaki Furumoto, Tomohiro Koyano, 2019, Int. J. Autom. Technol..

Turning of difficult-to-machine materials with an actively driven rotary tool (ADRT) —Proposition of reciprocating turning contingent on fundamental cutting characteristics—

Akira Hosokawa, Tatsuaki Furumoto, Tomohiro Koyano, 2018 .

Effect of Minimum Quantity Lubrication on Turning of Stainless steel:Application of dual spray system featuring independent mist control to rake and flank face

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2011 .

Building of Molding Die by Additive Manufacturing

Tatsuaki Furumoto, 2017 .

Line Consolidation Characteristics of SCM based Metal Powder

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2013 .

S131022 Study on Air Vent Structure in Injection Mold Manufactured by Rapid Tooling System

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2012 .

Dental Treatment with Laser Beam -Monitoring Enabling Safe Hard-Tooth-Tissue Removal-

Ryutaro Tanaka, Akira Hosokawa, Takashi Ueda, 2009, Int. J. Autom. Technol..

High-Quality End Milling of CFRP - Inclination Milling with High-Helix End Mill -

Akira Hosokawa, Takashi Ueda, Tatsuaki Furumoto, 2016, Int. J. Autom. Technol..

505 MQL Turning with Spinning Tool : Optimum supplying method of oil mist

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2014 .

Studies on Eco-Friendly Grinding with an Extremely Small Amount of Coolant - Applicability of Contact-Type Flexible Brush-Nozzle -

Akira Hosokawa, Tatsuaki Furumoto, Takahiro Kiwata, 2019, Int. J. Autom. Technol..

1101 Advanced and Combination Cutting Technologies : Proactive Approaches in Kanazawa University

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2010 .

3304 Tool edge temperature of spiral tap at tapping : Grasp of cutting behavior and measurement of tool edge temperature by two-color pyrometer

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2011 .

Fabrication of Release Agent Supply Die with Porous Structure Using Metal-Based Additive Manufacturing

Tatsuaki Furumoto, Mitsugu Yamaguchi, Yuki Hori, 2021, Int. J. Autom. Technol..

Thermal Conductivity of Metal Powder and Consolidated Material Fabricated via Selective Laser Melting

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2012 .

Study on Reduction of Residual Stress Induced during Rapid Tooling Process: Influence of Heating Conditions on Residual Stress

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2010 .

Study on Laser Consolidation of Metal Powder with Yb:fiber laser - Temperature Measurement of Laser Irradiation Area -

Akira Hosokawa, Tatsuaki Furumoto, Naoto Kobayashi, 2009 .

Mechanisms and characteristics of direct cutting of tungsten carbide using a diamond-coated carbide end mill

Tatsuaki Furumoto, Naoki Asakawa, Masaaki Otsu, 2016 .

Experimental investigation on cutting mechanism of laser sintered material using small ball end mill

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2009 .

Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2013 .

Turning of difficult-to-machine materials with actively driven rotary tool

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2010 .

Study on laser consolidation of metal powder with Yb:fiber laser—Evaluation of line consolidation structure

Akira Hosokawa, Tatsuaki Furumoto, Naoto Kobayashi, 2009 .

Development of Tool Edge Temperature Measurement Method in Wet Cutting

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2012 .

Finishing performance of cooling channel with face protuberance inside the molding die

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2012 .

Study on Machinability of Laser Sintered Materials Fabricated By Layered Manufacturing System: Influence of Different Hardness of Sintered Materials

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2012 .

Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging

Tatsuaki Furumoto, Abe Satoshi, Kyota Egashira, 2018 .

Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2012 .

High-quality machining of CFRP with high helix end mill

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2014 .

Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2009 .

Residual Stress and Deformation of Consolidated Structure Obtained by Layered Manufacturing Process

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2013 .

Permeability and strength of a porous metal structure fabricated by additive manufacturing

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, 2015 .

Surface temperature during cavity preparation on human tooth by Er:YAG laser irradiation

Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda, 2011 .

Micro electrical discharge machining using high electric resistance electrodes

Akira Hosokawa, Tatsuaki Furumoto, Tomohiro Koyano, 2017 .