Wojciech Adamczyk

发表

Wheeled Robot Dedicated to the Evaluation of the Technical Condition of Large-Dimension Engineering Structures

Pawel Kielan, Marcin Górski, Jaroslaw Domin, 2020, Robotics.

Visualization system for the measurement of size and sphericity of char particles under combustion conditions

Andrzej Szlek, Mario Ditaranto, Ryszard A. Białecki, 2016 .

Application of the computational method for predicting NOx reduction within large scale coal-fired boiler

Sebastian Werle, Wojciech Adamczyk, Arkadiusz Ryfa, 2014 .

Numerical simulations of the industrial circulating fluidized bed boiler under air- and oxy-fuel combustion

Ryszard A. Białecki, Wojciech Adamczyk, Paweł Kozołub, 2015 .

Od indywidualizmu do zespołowości: I-Teamy jako element ewolucji w sposobie prowadzenia dochodzeń przez reporterów śledczych

Wojciech Adamczyk, W. Adamczyk, 2016 .

Generation of data sets for semi-empirical models of circulated fluidized bed boilers using hybrid Euler-Lagrange technique

Kari Myöhänen, Timo Hyppänen, Ernst-Ulrich Hartge, 2018 .

Use of Matlab package for external local calibration of IR camera with microbolometric FPA detector

Wojciech Adamczyk, T. Kruczek, Grzegorz Kruczek, 2016 .

Data set generation at novel test-rig for validation of numerical models for modeling granular flows

Kari Myöhänen, Markku Nikku, Wojciech Adamczyk, 2021 .

Towards application of machine learning algorithms for prediction temperature distribution within CFB boiler based on specified operating conditions

Paweł Morkisz, Wojciech Adamczyk, Janusz Zdeb, 2021 .

An Innovational, Collision Model and Data Set Generation at Novel Test-Rig for Validation of Numerical Model in the Frame of Machine Learning

Kari Myöhänen, Alessandro Parente, Wojciech Adamczyk, 2021 .

Application of numerical procedure for thermal diagnostics of the delamination of strengthening material at concrete construction

Grzegorz Przybyla, Marcin Górski, Wojciech Adamczyk, 2019, International Journal of Numerical Methods for Heat & Fluid Flow.

CFD analysis of blood flow within aorta of patient with coarctation of aorta

Andrzej J. Nowak, Marek Rojczyk, Wojciech Adamczyk, 2016 .

UV-VISIBLE DIGITAL IMAGING OF SPLIT INJECTION IN A GASOLINE DIRECT INJECTION ENGINE

Adrian Irimescu, Simona Silvia Merola, Andrzej Szlek, 2015 .

A method for retrieving char oxidation kinetic data from reacting particle trajectories in a novel test facility

Andrzej Szlek, Mario Ditaranto, Wojciech Adamczyk, 2018 .

Modeling of particle transport and combustion phenomena in a large-scale circulating fluidized bed boiler using a hybrid Euler–Lagrange approach

Wojciech Adamczyk, Adam Klimanek, Gabriel Węcel, 2014 .

CFD modeling and thermodynamic analysis of a concept of a MILD-OXY combustion large scale pulverized coal boiler

Andrzej Szlek, Mario Ditaranto, Paweł Gładysz, 2017 .

Modeling oxy-fuel combustion in a 3D circulating fluidized bed using the hybrid Euler–Lagrange approach

T. Czakiert, Wojciech Adamczyk, Adam Klimanek, 2014 .

Numerical simulation of a dense solid particle flow inside a cyclone separator using the hybrid Euler–Lagrange approach

Wojciech Adamczyk, Adam Klimanek, Paweł Kozołub, 2017 .

CFD estimation of heat losses in thermal conductivity measurements

Wojciech Adamczyk, Paweł Kozołub, Ryszard A. Białecki, 2017 .

Numerical model of heat transfer in skin lesions

Andrzej J. Nowak, Wojciech Adamczyk, Ziemowit Ostrowski, 2015 .