S. Ryu

发表

Synthesis of fine Ca-doped BaTiO3 powders by solid-state reaction method—Part II: Rheological study on milling

D. Yoon, Sung-Soo Ryu, Sang-Kyun Lee, 2007 .

Thermo-Mechanical Properties of Al 2 TiO 5 Ceramics Stabilized with MgO and ZrO 2 Additives

Yong Chan Kim, Hyungtae Kim, Dami Kim, 2012 .

Solid-state synthesis of nano-sized BaTiO3 powder with high tetragonality

D. Yoon, Sung-Soo Ryu, S. Ryu, 2007 .

Characterization of mechanical properties of BaTiO3 ceramic with different types of sintering aid by nanoindentation

Hyung-Tae Kim, Seongwong Kim, Hyungtae Kim, 2009 .

Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying

Sung-Soo Ryu, I. Moon, Y. Kim, 2002 .

Effect of Additive Size on the Densification and Thermal Conductivity of AlN Ceramics with MgO–CaO–Al 2 O 3 –SiO 2 Additives

Hyungtae Kim, Woo-Seok Cho, Sung-Soo Ryu, 2017 .

Synthesis of fine Ca-doped BaTiO3 powders by solid-state reaction method—Part I: Mechanical activation of starting materials

D. Yoon, Sung-Soo Ryu, Sang-Kyun Lee, 2007 .

Sintering behavior of aluminum nitride ceramics with MgO–CaO–Al2O3–SiO2 glass additive

Sang‐Woo Kim, Sung-Soo Ryu, Hwa-Jun Lee, 2015 .

Material extrusion-based three-dimensional printing of WC–Co alloy with a paste prepared by powder coating

Y. Do Kim, Hyeondeok Jeong, Jong-Il Kim, 2022, Additive Manufacturing.

Mechanical properties of new vitrified bonds for cBN grinding wheel

Seongwong Kim, Hyeong Jun Kim, Seongwon Kim, 2009 .

Preparation of highly dispersed ultra-fine ZrC by combination of carbothermal reduction of ball-milled ZrO2 and C mixture and bead milling

Shinhoo Kang, Sung-Soo Ryu, Youngmoo Kim, 2013 .

Effects of Debinding Atmosphere on Properties of Sintered Reaction-bonded Si3N4 Prepared by Tape Casting Method

Sung-Min Lee, H. Hwang, Yoonsoo Han, 2016 .

Optimization of Binder Burnout for Reaction Bonded Si 3 N 4 Substrate Fabrication by Tape Casting Method

Sung-Min Lee, H. Hwang, Yoonsoo Han, 2015 .

The fabrication of front electrodes of Si solar cell by dispensing printing

H. Chang, Dohyung Kim, Sung-Soo Ryu, 2012 .

Sintering behavior of garnet-type Li7La3Zr2O12-Li3BO3 composite solid electrolytes for all-solid-state lithium batteries ☆

Young Do Kim, S. Son, W. Pan, 2017 .

Effect of Li3BO3 Additive on Densification and Ion Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes of All-Solid-State Lithium-Ion Batteries

S. Son, Sung-Min Lee, Yoonsoo Han, 2016 .

Fabrication of Solid State Electrolyte Li7La3Zr2O12 thick Film by Tape Casting

S. Son, Hyungtae Kim, Yoonsoo Han, 2016 .

Sintering Behavior of Nano-sized Gd 2 O 3 -doped CeO 2 Powder Prepared by A High Energy Ball Milling

Hyungtae Kim, S. Ryu, 2008 .

Densification behavior of mechanically alloyed W-Cu composite powders by the double rearrangement process

Jin-Chun Kim, I. Moon, Y. Kim, 1998 .

Fabrication of high-strength macroporous carbons with tunable pore size by a simple powder process using phenolic resin microspheres

Sung-Min Lee, Hyeondeok Jeong, Yang-Gu Kang, 2020 .

Effect of Microstructural Development on Mechanical and Electrical Properties of Inkjet-Printed Ag Films

Inyoung Kim, Hyun Chul Jung, Jongryoul Kim, 2008 .

Real-time slurry characteristic analysis during ball milling using vibration data

Jungwon Yu, Seiki Kim, Young-Jun Lee, 2021, Journal of Asian Ceramic Societies.

Microstructural observation of complex-shaped green ceramic compact and numerical simulation with special consideration on crack formation

D. Yoon, Md Rokon Ud Dowla Biswas, Sung-Soo Ryu, 2021, Ceramics International.

Grain Growth in the Nanocrystalline W–Cu and Cu–Pb Composite Powders Prepared by Mechanical Alloying

Soon-Wook Kim, I. Moon, Wontae Jang, 2001, International Journal of Materials Research.

On sinterability of Cu-coated W nanocomposite powder prepared by a hydrogen reduction of a high-energy ball-milled WO3-CuO mixture

Young Do Kim, H. R. Park, Hyunkook Kim, 2012, Journal of Materials Science.

Notice of RetractionDevelopment and characterization of sintered friction materials for brake pads

B. Goo, Seongwong Kim, S. Ryu, 2013, International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

The influence of annealing temperature on the microstructural development of W–Cu composite powder prepared by high-energy ball milling

G. Kim, Jin-Chun Kim, Sung-Soo Ryu, 2006 .

Characterization of complex die-pressed Al2O3 green compact using liquid immersion, X-ray tomography, and numerical simulations

S. Hyun, D. Yoon, Md Rokon Ud Dowla Biswas, 2021, Journal of the European Ceramic Society.

A Confidence Interval-Based Process Optimization Method Using Second-Order Polynomial Regression Analysis

Young Jae Lee, Jungwon Yu, Kil-Taek Lim, 2020, Processes.

Recovery of indium powders from indium chloride solutions by cementationa

H. Hong, G. Kim, Sung-Soo Ryu, 2014 .

Low-Temperature Sintering of Garnet-Type Li7La₃Zr₂O12 Solid Electrolyte with Li₃BO₃ Additive Prepared by Polymeric Complex Method.

R. Shin, S. Ryu, 2019, Journal of nanoscience and nanotechnology.

AlN with high strength and high thermal conductivity based on an MCAS-Y2O3-YSZ multi-additive system

Hyeondeok Jeong, Sung-Soo Ryu, Su-Hyun Baek, 2021, Journal of the European Ceramic Society.

Effect of the Molar Ratio of B2O3 to Bi2O3 in Al Paste with Bi2O3–B2O3–ZnO Glass on Screen Printed Contact Formation and Si Solar Cell Performance

H. Chang, H. Hong, Bit-Na Kim, 2013 .

Effects of Particle Size and Binder Phase Addition on Formability of Li-Si Alloy Powder for Thermal Battery Anode

Sung-Min Lee, Seongwong Kim, Hyungtae Kim, 2014 .

Effects of Li 2 O Addition and Heat-Treatment on Formability of FeS 2 Powder for Cathode of Thermal Battery

Sung-baek Cho, Seung-Ho Kang, Sung-Min Lee, 2014 .

Facile Synthesis of Highly Dispersed Ultra-fine ZrC Powders by Carbothermal Reduction Method Using Nanosized ZrO2and Nanosized Graphite Powder Mixtures

Sung-Soo Ryu, Wha-Jun Lee, S. Ryu, 2013 .