Giuliano Bissacco

发表

Characterization Methods of Nano-Patterned Surfaces Generated by Induction Heating Assisted Injection Molding

Stefano Menotti, Giuliano Bissacco, Hans Nørgaard Hansen, 2015, Int. J. Autom. Technol..

Modeling of the effect of tool wear per discharge estimation error on the depth of machined cavities in micro-EDM milling

Giuliano Bissacco, Hans Nørgaard Hansen, Govindan Puthumana, 2017 .

A new modelling framework for die-sinking micro EDM

Giuliano Bissacco, Samuel Bigot, Anthony Surleraux, 2012 .

Moulding Process Characterization of Paper Bottles using Computed Tomography

Prateek Saxena, Giuliano Bissacco, P. Saxena, 2016 .

Offline tool trajectory compensation for cutting forces induced errors in a portable machine tool

Giuliano Bissacco, Hans Nørgaard Hansen, Alessandro Checchi, 2019, Procedia CIRP.

Tooling Process Chains and Concepts

Giuliano Bissacco, Hans Nørgaard Hansen, Peter Torben Tang, 2009 .

Integrated Design, an Approach Towards DfµMA

Giuliano Bissacco, Hans Nørgaard Hansen, Aminul Islam, 2014 .

Process Chains and Tooling Concepts

Giuliano Bissacco, Hans Nørgaard Hansen, Peter Torben Tang, 2015 .

Snapshot of micro EDM technology for industry

Giuliano Bissacco, J. Valentincic, Samuel Bigot, 2009 .

Tooling for Production of the Green Fiber Bottle

Prateek Saxena, Giuliano Bissacco, Alessandro Stolfi, 2018 .

Comparison of selected processes for surface microstructuring of complex mould for an implanted device

Yang Zhang, Giuliano Bissacco, Hans Nørgaard Hansen, 2018 .

Process monitoring for intelligent manufacturing processes - Methodology and application to Robot Assisted Polishing

Giuliano Bissacco, Leonardo De Chiffre, Lukas Pilny, 2015 .

A mechanistic model for the prediction of cutting forces in the face-milling of ductile spheroidal cast iron components for wind industry application

Giuliano Bissacco, Hans Nørgaard Hansen, Alessandro Checchi, 2018 .

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

Giuliano Bissacco, Leonardo De Chiffre, Giuseppe Dalla Costa, 2015 .

Size Effects on Surface Generation in Micro Milling of Hardened Tool Steel

Giuliano Bissacco, Hans Nørgaard Hansen, L. De Chiffre, 2006 .

Modelling the cutting edge radius size effect for force prediction in micro milling

Giuliano Bissacco, Hans Nørgaard Hansen, J. Slunsky, 2008 .

Die-Sinking Micro EDM for Complex 3D Structuring — Research Directions

Giuliano Bissacco, Samuel Bigot, J. Valentincic, 2011 .

4M network of excellence, progress report 2006-2008

Giuliano Bissacco, Hans Nørgaard Hansen, Guido Tosello, 2007 .

Accuracy of depth of cut in micro milling operations

Giuliano Bissacco, 2016 .

Surfcace Generation and Optimization in Micromilling

Giuliano Bissacco, 2004 .

INTEGRATED DESIGN AS AN APPROACH TOWARDS DF

Giuliano Bissacco, Hans Nørgaard Hansen, Aminul Islam, 2014 .

Analysis and Characterization of Machined Surfaces with Aesthetic Functionality

Giuliano Bissacco, Hans Nørgaard Hansen, Francesco Giuseppe Biondani, 2019, Int. J. Autom. Technol..

A Study of Friction Testing Methods Applicable to Demoulding Force Prediction for Micro Replicated Parts

David Kennedy, Giuliano Bissacco, Kevin Delaney, 2010 .

Force analysis in micro milling Al 6082 T6 in various engagement conditions

Giuliano Bissacco, Hans Nørgaard Hansen, T. Gietzelt, 2008 .

Industrial characterization of nano-scale roughness on polished surfaces

Giuliano Bissacco, Jan C. Petersen, Morten H. Madsen, 2015, SPIE Optifab.

Effect of cutting edge micro geometry on surface generation in ball end milling

Giuliano Bissacco, Francesco Giuseppe Biondani, G. Bissacco, 2019, CIRP Annals.

Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

Giuliano Bissacco, Lukáš Pilný, 2015 .

A Structured Review and Classification of Demolding Issues and Proven Solutions

David Kennedy, Giuliano Bissacco, Kevin Delaney, 2012 .

Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

Giuliano Bissacco, Leonardo De Chiffre, Lukás Pilný, 2016, Int. J. Comput. Integr. Manuf..

Setup of a micro milling force knowledge database - a 4M cross divisional project

Giuliano Bissacco, Thomas Gietzelt, 2008 .

Direct dynamic calibration of dynamometers for micro milling operations

Giuliano Bissacco, Hans Nørgaard Hansen, Alessandro Bau, 2008 .

Real time power consumption monitoring for energy efficiency analysis in micro EDM milling

Giuliano Bissacco, Joško Valentinčič, Andrej Lebar, 2015 .

Multidisciplinary graduate course and PhD summerschool in micromechanical system design and manufacture

Giuliano Bissacco, Hans Nørgaard Hansen, Arnaud De Grave, 2008 .

ON-MACHINE COORDINATE MEASUREMENTS IN MICRO EDM MILLING

Enrico Savio, Giuliano Bissacco, Simone Carmignato, 2013 .

Validation of in-line surface characterization by light scattering in Robot Assisted Polishing

Giuliano Bissacco, Leonardo De Chiffre, Lukas Pilny, 2014 .

High aspect ratio micro tool manufacturing for polymer replication using μEDM of silicon, selective etching and electroforming

Giuliano Bissacco, Hans Nørgaard Hansen, Guido Tosello, 2008 .

Moulded Pulp Manufacturing: Overview and Prospects for the Process Technology

Thomas J. Howard, Prateek Saxena, Giuliano Bissacco, 2017 .

Assessment of electrode wear measurement in micro EDM milling

Giuliano Bissacco, J. Valentincic, G. Tristo, 2010 .

Soft tooling process chain for the manufacturing of micro-functional features on molds used for molding of paper bottles

Prateek Saxena, Giuliano Bissacco, David Bue Pedersen, 2020, Journal of Manufacturing Processes.

Micromilling of hardened tool steel for mould making applications

Giuliano Bissacco, Hans Nørgaard Hansen, L. De Chiffre, 2005 .

Methodologies for characterization of smearing micro geometry on ball end milled tool steel surfaces

Giuliano Bissacco, Hans Nørgaard Hansen, Francesco Giuseppe Biondani, 2018 .

Characterizing Green Fiber Bottle Prototypes Using Computed Tomography

Prateek Saxena, Giuliano Bissacco, Leonardo De Chiffre, 2017 .

Reliability of electrode wear compensation based on material removal per discharge in micro EDM milling

Giuliano Bissacco, Hans Nørgaard Hansen, J. Valentincic, 2013 .

Precision manufacturing methods of inserts for injection molding of microfluidic systems.

Giuliano Bissacco, Hans Nørgaard Hansen, Peter Torben Tang, 2005 .

Feasibility of wear compensation in micro EDM milling based on discharge counting and discharge population characterization

Giuliano Bissacco, Hans Nørgaard Hansen, J. Valentincic, 2011 .