Zhihui Xie

发表

Optimization for sintering proportioning based on energy value

Lingen Chen, Fengrui Sun, Changxin Liu, 2016 .

Thermodynamic optimization opportunities for the recovery and utilization of residual energy and heat in China's iron and steel industry: A case study

Lingen Chen, Fengrui Sun, Bo Yang, 2015 .

Constructal entransy dissipation rate minimization of a rectangular body with nonuniform heat generation

Lingen Chen, Fengrui Sun, Zhihui Xie, 2016 .

Progress of constructal theory in China over the past decade

Lingen Chen, Fengrui Sun, Zhihui Xie, 2019, International Journal of Heat and Mass Transfer.

Multi-disciplinary, multi-objective and multi-scale constructal optimizations for heat and mass transfer processes performed in Naval University of Engineering, a review

Lingen Chen, Zhihui Xie, Huijun Feng, 2017 .

Constructal optimization of twice Y-shaped assemblies of fins by taking maximum thermal resistance minimization as objective

Lingen Chen, Fengrui Sun, Zhihui Xie, 2010 .

Constructal design for gas-turbine blade based on minimization of maximum thermal resistance

Lingen Chen, Fengrui Sun, Zhihui Xie, 2015 .

“Volume-point” mass transfer constructal optimization based on flow resistance minimization with cylindrical element

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal optimization of a vertical insulating wall based on a complex objective combining heat flow and strength

Fengrui Sun, Zhihui Xie, Lingen Chen, 2010 .

Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions

Fengrui Sun, Zhihui Xie, Huijun Feng, 2014 .

Constructal optimization of cylindrical heat sources with forced convection based on entransy dissipation rate minimization

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal optimization for line-to-line vascular based on entropy generation minimization principle

Fengrui Sun, Zhihui Xie, Lingen Chen, 2018, International Journal of Heat and Mass Transfer.

ECOLOGICAL OPTIMIZATION OF AN IRREVERSIBLE OTTO CYCLE WITH VARIABLE SPECIFIC HEATS OF WORKING FLUID

Xiaoyong Qin, Zhihui Xie, Yanlin Ge, 2017 .

Constructal optimization for “disc-point” heat conduction with nonuniform heat generating

Zhihui Xie, Huijun Feng, Lingen Chen, 2019, International Journal of Heat and Mass Transfer.

Constructal heat transfer rate maximization for cylindrical pin-fin heat sinks

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal entropy generation rate minimization for asymmetric vascular networks in a disc-shaped body

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal optimization of cylindrical heat sources surrounded with a fin based on minimization of hot spot temperature

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Heat conduction constructal optimization for nonuniform heat generating area based on triangular element

Zhihui Xie, Huijun Feng, Lingen Chen, 2018 .

Burdening proportion and new energy-saving technologies analysis and optimization for iron and steel production system

Xiaoyong Qin, Zhihui Xie, Shaojun Xia, 2018 .

Constructal entropy generation rate minimization for X-shaped vascular networks

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall

Fengrui Sun, Zhihui Xie, Huijun Feng, 2014 .

Constructal entransy dissipation rate minimization for solid–gas reactors with heat and mass transfer in a disc-shaped body

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal design for a rectangular body with nonuniform heat generation

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal design for “+” shaped high conductivity pathways over a square body

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal optimizations for “+” shaped high conductivity channels based on entransy dissipation rate minimization

Zhihui Xie, Huijun Feng, Lingen Chen, 2018 .

“Disc-point” heat and mass transfer constructal optimization for solid–gas reactors based on entropy generation minimization

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Multiobjective constructal optimization of an insulating wall combining heat flow, strength and weight

Fengrui Sun, Zhihui Xie, Lingen Chen, 2011 .

System dynamics analysis on characteristics of iron-flow in sintering process

Fengrui Sun, Zhihui Xie, Changxin Liu, 2015 .

“Volume-Point” Mass Transfer Constructal Optimization Based on Triangular Element

Fengrui Sun, Zhihui Xie, Huijun Feng, 2013 .

Constructal design for helm-shaped fin with internal heat sources

Fengrui Sun, Zhihui Xie, Huijun Feng, 2017 .

Generalized constructal optimization for solidification heat transfer process of slab continuous casting based on heat loss rate

Fengrui Sun, Zemin Ding, Zhihui Xie, 2014 .

Constructal heat conduction optimization: Progresses with entransy dissipation rate minimization

Zhihui Xie, Shuhuan Wei, Lingen Chen, 2018, Thermal Science and Engineering Progress.

“Disc-point” mass transfer Constructal optimizations with Darcy and Hagen–Poiseuille flows in porous media

Fengrui Sun, Zhihui Xie, Huijun Feng, 2014 .

Constructal optimization on T-shaped cavity based on entransy dissipation minimization

Fengrui Sun, Zhihui Xie, Lingen Chen, 2009 .

Constructal optimization of a disc-shaped body with cooling channels for specified power pumping

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective

Fengrui Sun, Zhihui Xie, Lingen Chen, 2009 .

Constructal optimization of a sinter cooling process based on exergy output maximization

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal entransy dissipation rate minimization for triangular heat trees at micro and nanoscales

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal design for an iron and steel production process based on the objectives of steel yield and useful energy

Zhihui Xie, Huijun Feng, Lingen Chen, 2017 .

Constructal design of nonuniform heat generating area based on triangular elements: A case of entropy generation minimization

Zhihui Xie, Huijun Feng, Lingen Chen, 2019, International Journal of Thermal Sciences.

Constructal designs for insulation layers of steel rolling reheating furnace wall with convective and radiative boundary conditions

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Generalized constructal optimization for the secondary cooling process of slab continuous casting based on entransy theory

Fengrui Sun, Zemin Ding, Zhihui Xie, 2014 .

Constructal design for a disc-shaped area based on minimum flow time of a flow system

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal design for X-shaped hot water network over a rectangular area

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Entransy dissipation minimization for generalized heat exchange processes

Fengrui Sun, Zhihui Xie, Shaojun Xia, 2016 .

Convective heat transfer characteristics of line-to-line vascular microchannel heat sink with temperature-dependent fluid properties

Fengrui Sun, Zhihui Xie, Lingen Chen, 2016 .

Thermal efficiency maximization for H- and X-shaped heat exchangers based on constructal theory

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal entransy dissipation rate minimization for helm-shaped fin with inner heat sources

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal optimization for leaf-like body based on maximization of heat transfer rate

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal optimization for a single tubular solid oxide fuel cell

Fengrui Sun, Zhihui Xie, Huijun Feng, 2015 .

Constructal design and experimental validation of a non- uniform heat generating body with rectangular cross-section and parallel circular cooling channels

Zhihui Xie, Shaojun Xia, Huijun Feng, 2020 .

Constructal operation cost minimization for in-line cylindrical pin-fin heat sinks

Fengrui Sun, Zhihui Xie, Huijun Feng, 2019, International Journal of Heat and Mass Transfer.

Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization

Fengrui Sun, Zhihui Xie, Lingen Chen, 2011 .

Constructal optimization for “disc-point” heat conduction at micro and nanoscales

Fengrui Sun, Zhihui Xie, Huijun Feng, 2013 .

Generalized constructal optimization of strip laminar cooling process based on entransy theory

Fengrui Sun, Zhihui Xie, Huijun Feng, 2016 .

Constructal Optimization for Tree-Shaped Fluid Networks in a Disc-Shaped Area Subjected to the Surface Area Constraint

Fengrui Sun, Zhihui Xie, Huijun Feng, 2014 .