I. Maher

发表

White layer thickness prediction in wire-EDM using CuZn-coated wire electrode – ANFIS modelling

Ahmed A. D. Sarhan, Mohd Hamdi, Houriyeh Marashi, 2016 .

1.9 Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process

Ahmed A. D. Sarhan, Houriyeh Marashi, Ibrahem Maher, 2017 .

Development of a new performance criteria for higher wire-electrical discharge machining performance considering the ecological and economical aspects / Ibrahem Maher Abdelrahem Soltan

Ibrahem Maher, Abdelrahem Soltan, A. Soltan, 2016 .

Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining

Ahmed A. D. Sarhan, Ibrahem Maher, M. E. H. Eltaib, 2015 .

Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

Ahmed A. D. Sarhan, Mohd Hamdi, Ibrahem Maher, 2015 .

Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

A. Sarhan, M. Hamdi, I. Maher, 2014, The International Journal of Advanced Manufacturing Technology.

Adaptive Neuro-Fuzzy Inference System for Modelling the Effect of Slurry Impacts on PLA Material Processed by FDM

B. Saleh, Ibrahem Maher, Yasser Abdelrhman, 2020, Polymers.

Improved thermo-economic performance of solar desalination via copper chips, nanofluid, and nano-based phase change material

A. W. Kandeal, A. Kabeel, A. Thakur, 2021, Solar Energy.

Improving the performance of tubular solar still integrated with drilled carbonized wood and carbon black thin film evaporation

A. W. Kandeal, Gamal B. Abdelaziz, S. Sharshir, 2022, Solar Energy.

Improve wire EDM performance at different machining parameters - ANFIS modeling

Ahmed A. D. Sarhan, Mohd Hamdi, Ibrahem Maher, 2015 .

Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert

Ahmed A. D. Sarhan, Ibrahem Maher, Singh Ramesh, 2015 .

Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production

Ahmed A. D. Sarhan, Mohd Hamdi, Ibrahem Maher, 2015 .

Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling

Ahmed A. D. Sarhan, Ibrahem Maher, M. E. H. Eltaib, 2014 .

Surface roughness prediction of polylactic acid (PLA) products manufactured by 3D printing and post processed using a slurry impact technique: ANFIS-based modeling

Yasser Abdelrhman, M. Heshmat, I. Maher, 2022, Progress in Additive Manufacturing.

Development of a New Cost Performance Index (CPI) for Selecting the Most Suitable Wire Electrode in Wire-EDM Machining

A. Sarhan, M. Hamdi, I. Maher, 2021, Arabian Journal for Science and Engineering.

Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM

Ahmed A. D. Sarhan, Ibrahem Maher, A. Sarhan, 2017 .

Manufacturing of porous aluminum 2024 alloy samples with impressive compression properties

Mohsen A. Hassan, A. Haseeb, Ibrahem Maher, 2019, Materials Research Express.

INVESTIGATION ON SURFACE FINISH AND TOOL CONDITION WHILE TURNING AL20 METAL MATRIX COMPOSITE

V. Songmene, Mohsen Marani, I. Maher, 2017 .

1.7 Techniques to Improve EDM Capabilities: A Review

Ahmed A. D. Sarhan, Houriyeh Marashi, Ibrahem Maher, 2017 .

Performance of Electrical Discharge Milling and Sinking in Micro Graphite Powder Mixed Dielectric

A. Sarhan, M. Hamdi, I. Maher, 2017 .

The Enhancement of Die Sink EDM Machining Efficiency Incorporating Micro-Flakes of Graphite Powder

I. Maher, H. Marashi, Chew Poh Kai, 2024, Arabian Journal for Science and Engineering.