C. Steve Suh

发表

On nonlinear cutting response and tool chatter in turning operation

Achala V. Dassanayake, C. Steve Suh, C. Suh, 2008 .

Adaptive Filters and Filtered‐x LMS Algorithm

C. Steve Suh, Meng-Kun Liu, 2013 .

On the Temporal Network Analysis With Link Prediction

Bin Wu, C. Steve Suh, 2018 .

Impact of coupling strength on reaching network consensus

C. Steve Suh, Chun Lin Yang, Mansour Karkoub, 2018 .

Cutting Dynamics and Machining Instability

C. Steve Suh, Meng-Kun Liu, 2013 .

Wavelet-Based Filtered-X LMS Algorithm for the Control of Permanent Magnet Synchronous Motors

C. Steve Suh, Xiaomeng Tong, 2014 .

A Novel Nonlinear Time-Frequency Control Strategy for Underactuated Mechanical System

C. Steve Suh, Zilong Zhang, 2019 .

Mitigation of Milling Chatter at High-Speed

C. Steve Suh, Meng-Kun Liu, 2012 .

Simultaneous Time-Frequency Control of Active Magnetic Bearing

C. Steve Suh, Meng-Kun Liu, 2013 .

Precision concurrent speed and position tracking of brushed dc motors using nonlinear time-frequency control

C. Steve Suh, Xin Wang, 2017 .

Decentralized Multi-Robot Motion Planning Applicable to Dynamic Environment

C. Steve Suh, Bin Wu, 2019 .

Power Density – An Alternative Approach to Quantifying Fatigue Failure

C. Steve Suh, Zachary T. Branigan, 2018 .

A Time-Frequency PID Controller Design for Improved Anti-Interference Performance of a Solenoid Valve Applicable to Hydraulic Cylinder Actuation

C. Steve Suh, Zhenghe Song, Yuefeng Du, 2017 .

Complex Cutting Motions

C. Steve Suh, Brandon C. Gegg, Albert C. J. Luo, 2011 .

A Novel Nonlinear Time-Frequency Strategy for Stabilizing Inverted Pendulum Cart System

C. Steve Suh, Zilong Zhang, 2018 .

Time-frequency based field oriented control of permanent magnet synchronous motors

C. Steve Suh, Xin Wang, 2018 .

Nonlinear time-frequency control of PM synchronous motor instability applicable to electric vehicle application

C. Steve Suh, Xin Wang, 2016 .

Active Magnetic Bearings for High Speed Spindle Design With Nonlinear Time-Frequency Control

C. Steve Suh, Mengke Liu, 2015 .

Dynamics of Turning Operation Part II: Model Validation and Stability at High Speed

C. Steve Suh, Wayne N.P. Hung, Eric B. Halfmann, 2017 .

Multidimensional Time‐Frequency Control of Micro‐Milling Instability

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2013 .

Machining Dynamics Involving Whirling Part II: Machining Motions Described by Nonlinear and Linearized Models

Achala V. Dassanayake, C. Steve Suh, C. Suh, 2007 .

On the Causes of Rolling Instability and Chatter

C. Steve Suh, S. T. Noah, Yun-Jeng Lin, 2002 .

On the Proper Description of Complex Network Dynamics

C. Steve Suh, Chun-Lin Yang, 2018 .

Impact of Coupled Whirling and Tool Geometry on Machining Dynamics

Achala V. Dassanayake, C. Steve Suh, 2012 .

Controlling Bifurcation and Dynamic Behavior in Vibro-Impact System

C. Steve Suh, Chi-Wei Kuo, 2014 .

A case of mitigating non-autonomous time-delayed system with cubic order feedback

C. Steve Suh, Chi-Wei Kuo, C. Suh, 2017, J. Frankl. Inst..

Impact of Tool Geometry on Cutting Dynamics

Achala V. Dassanayake, C. Steve Suh, 2007 .

Simultaneous Time‐Frequency Control of Dynamic Instability

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2013 .

Machining Dynamics Involving Whirling Part I: Model Development and Validation

Achala V. Dassanayake, C. Steve Suh, C. Suh, 2007 .

Mechanical Fault Diagnosis Using Numerical Hilbert Analysis

C. Steve Suh, Baozhong Yang, 2002 .

Multi-dimensional time-frequency control of micro-milling instability

C. Steve Suh, Meng-Kun Liu, Eric B. Halfmann, 2014 .

High Speed Non-Linear Micro-Milling Dynamics

C. Steve Suh, Eric B. Halfmann, 2012 .

Concurrent Speed and Position Tracking of PM Brushed DC Motors

C. Steve Suh, Xin Wang, 2015 .

A 3D Turning Model for the Interpretation of Machining Stability and Chatter

Achala V. Dassanayake, C. Steve Suh, C. Suh, 2006 .

Wavelet Filter Banks

C. Steve Suh, Meng-Kun Liu, 2013 .

A General Framework for Dynamic Complex Networks

C. Steve Suh, Chun-Lin Yang, C. Suh, 2021 .

Appendix: MATLAB® Programming Examples of Nonlinear Time‐Frequency Control

C. Steve Suh, Meng-Kun Liu, 2013 .

Effects of Spindle Speed on Turning Stability

Achala V. Dassanayake, C. Steve Suh, 2012 .

ON THE FUNDAMENTAL CHARACTERISTICS OF COMPLEX NETWORK WITH MULTI-AGENT CONSTITUENTS

C. Steve Suh, Chun-Lin Yang, 2016 .

Characterization of Dynamical Instability Using Instantaneous Frequency

C. Steve Suh, Baozhong Yang, James Fisher, 2002 .

Basic Physical Principles

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2013 .

Turning Dynamics: Part 1 — Experimental Analysis

C. Steve Suh, N. P. Hung, Eric B. Halfmann, 2012 .

Nonlinear Time-Frequency Control of Permanent Magnet Synchronous Motors

C. Steve Suh, Xin Wang, 2016 .

Integration of Extenics and Axiomatic Design theory

C. Steve Suh, Zhenghe Song, Wenjuan Li, 2017, ITQM.

Control of High Speed Milling Chatter in Simultaneous Time-Frequency Domain

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2011 .

Turning Dynamics: Part 2 — Stability at High Speed

C. Steve Suh, N. P. Hung, Eric B. Halfmann, 2012 .

A Comprehensive Model for Cutting Dynamics

Achala V. Dassanayake, C. Steve Suh, 2005 .

Cutting Dynamics Mechanism

C. Steve Suh, Brandon C. Gegg, Albert C. J. Luo, 2011 .

On the Dynamics of Complex Network

C. Steve Suh, Chun-Lin Yang, 2017 .

On the Global Dynamics of Complex Networks

C. Steve Suh, Chun-Lin Yang, 2019 .

Simultaneous Time-Frequency Control of Multi-Dimensional Micro-Milling Instability

C. Steve Suh, Meng-Kun Liu, Eric B. Halfmann, 2012 .

Machine Tool Vibrations and Cutting Dynamics

C. Steve Suh, C.Gegg Brandon, C.J.Luo Albert, 2011 .

Dynamics of Turning Operation Part I: Experimental Analysis Using Instantaneous Frequency

C. Steve Suh, Wayne N.P. Hung, Eric B. Halfmann, 2017 .

Interpretation of crack-induced rotor non-linear response using instantaneous frequency

C. Steve Suh, C. Suh, Baozhong Yang, 2004 .

Synchronization of chaos in simultaneous time-frequency domain

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2013 .

On the nonlinear features of time-delayed feedback oscillators

C. Steve Suh, C. Suh, Baozhong Yang, 2004 .

On fault induced nonlinear rotary response and instability

C. Steve Suh, C. Suh, Baozhong Yang, 2006 .

On the Dispersion and Attenuation of Guided Waves in Tubular Section with Multi-Layered Viscoelastic Coating — Part I: Axial Wave Propagation

C. Steve Suh, Chi-Wei Kuo, C. Suh, 2017 .

Control of Cutting Vibration and Machining Instability: A Time-Frequency Approach for Precision, Micro and Nano Machining

C. Steve Suh, Meng-Kun Liu, 2013 .

The Optimization of Time-Frequency Control: Using Non-Autonomous Time-Delay Feedback Systems as Example

C. Steve Suh, Chi-Wei Kuo, 2016 .

Non-contact ultrasonic inspection of medical catheters for polymeric bond defects

Peng Xu, C. Steve Suh, Andrew K. Chan, 2004 .

Simultaneous time–frequency control of bifurcation and chaos

C. Steve Suh, Meng-Kun Liu, Meng-Kun Liu, 2012 .