J. Ju

发表

The Microstructure and Mechanical Properties of Magnetic Shape Memory Alloys NiCo40+xAl30-x [X=0、 3、 6、 10]

Hua-nan Liu, J. Bai, F. Xue, 2014 .

Recent progress of novel biodegradable Zinc alloys: from the perspective of strengthening and toughening

Hua-nan Liu, J. Bai, F. Xue, 2022, Journal of Materials Research and Technology.

Microstructure and Magnetic Property Variation with Addition of Rare Earth Element Dy in Co-Ni-Al Ferromagnetic Shape Memory Alloy

F. Xue, Hong Li, Jia Ju, 2015 .

Microstructure and mechanical properties change by rare earth Dy added in as-cast Co–Ni–Al ferromagnetic shape memory alloys

J. Bai, F. Xue, Jian Zhou, 2014 .

Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance

Hua-nan Liu, Chao Sun, Y. Xin, 2022, Journal of Alloys and Compounds.

Corrosion Prevention for Peo-Coated Mg by Phosphate-Based Sealing Treatment with Added Cation

J. Bai, F. Xue, Kun Qian, 2023, SSRN Electronic Journal.

Revealing the abnormal softening mechanisms of Zn-xCu (x=2, 3) wrought alloys by gradually increasing ECAP numbers

Ziyue Xu, Hua-nan Liu, Chao Sun, 2022, Materials Science and Engineering: A.

Interface and Bond Strength of Brazing Cemented Carbide K20 to Alloy Steel AISI 4140 by High-Frequency Induction

J. Bai, F. Xue, Jian Zhou, 2016 .

Effect of Bi Doping on the Thermoelectric Properties of Mg2Si0.3Ge0.04Sn0.66 Compound

Huan-Yin Liu, K. Yin, Jia Ju, 2022, Journal of Materials Research and Technology.

Dynamic precipitation behavior and mechanical property of an Mg94Y4Zn2 alloy prepared by multi-pass successive equal channel angular pressing

Hua-nan Liu, J. Bai, A. Ma, 2017 .

Microstructure evolution and mechanical improvement by rapid solidification of polycrystalline Co35Ni32Al32Dy alloy

Hua-nan Liu, Jia Ju, Chen Yan, 2019, Materials Research Express.

Martensite Transformation and Mechanical Properties of Polycrystalline Co-Ni-Al Alloys with Gd Doping

Hua-nan Liu, Hong Li, Zhuang Liu, 2018, Metals.

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy

Hua-nan Liu, Zhuang Liu, Jia Ju, 2017 .

Microstructure and Machine Properties of Co37+xNi34-xAl29(x=0,1,2,3) Ferromagnetic Shape Memory Alloys

Jia Ju, Liu Yang, Chen Yan, 2017 .

Microstructure, Magnetism and Magnetic Field Induced-Strain in Er-Doped Co-Ni-Al Polycrystalline Alloy

Hua-nan Liu, Tao Li, Jia Ju, 2017, Journal of Electronic Materials.

Preparation and mechanical properties of C/C composites reinforced with arrayed SiC columnar pins

Shunwei Liu, Jia Ju, Jiangang Jia, 2021 .

Evolution of grain size and texture of Zn-0.5Cu ECAP alloy during annealing at 200 ℃ and its impact on mechanical properties

Hua-nan Liu, Chao Sun, Y. Xin, 2022, Journal of Alloys and Compounds.

Experimental and computational investigation on performances of the thermoplastic elastomer SEBS/Poly(lactic acid) blends

Jiahao Chen, H. Cai, Jia Ju, 2023, Materials Today Communications.

In vitro degradation of self‐reinforced poly(lactic acid) with beta‐tricalcium phosphate composite prepared by equal channel angular pressing

W. Ye, Qingsong He, J. Bai, 2020 .

Evolutions of CuZn5 and Mg2Zn11 phases during ECAP and their impact on mechanical properties of Zn-Cu-Mg alloys

Chao Sun, J. Bai, F. Xue, 2022, Journal of Materials Research and Technology.

Fragmentation of 18R LPSO phases through multi-pass equal channel angular pressing and its impact on rollability of Mg97Y2Zn1 (at%) alloy

Hua-nan Liu, Chao Sun, Xiao-Bo Chen, 2020 .

Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn-Mg binary alloys

Hua-nan Liu, Chao Sun, J. Bai, 2021, Journal of Materials Research and Technology.

A study on the impact behaviors of Mg wires/PLA composite for orthopedic implants

Xiaobo Zhang, J. Bai, C. Chu, 2019, Journal of Materials Science.

A two-step dynamic recrystallization induced by LPSO phases and its impact on mechanical property of severe plastic deformation processed Mg97Y2Zn1 alloy

Hua-nan Liu, D. Song, A. Ma, 2017 .

Microstructure, Martensite Transition and Mechanical Properties Investigations of Polycrystalline Co-Ni-Al Alloys with Er Doping

Hua-nan Liu, Jia Ju, S. Lou, 2017, Journal of Materials Engineering and Performance.

Structure and performance changes of Ni-Co-Al shape memory alloys in relation to Co/Al atomic ratio

F. Xue, Liuxia Sun, J. Ju, 2015 .

Microstructure and mechanical property of Mg–10Gd–2Y–1.5Zn–0.5Zr alloy processed by eight-pass equal-channel angular pressing

Hua-nan Liu, A. Ma, Jinghua Jiang, 2018, Rare Metals.

Unveiling the microstructure evolution and mechanical properties of submerged friction stir welded joint of fine-grained NiCoCr medium entropy alloy

G. Huang, T. Chou, S.F. Liu, 2023, Materials Characterization.

Improvement of ductility and work hardening ability in a high strength Zn-Mg-Y alloy via micron-sized and submicron-sized YZn12 particles

Yufeng Zheng, Haoran Wu, Hua-nan Liu, 2021 .

Enhancement of Corrosion Resistance and Antibacterial Properties of Peo Coated Az91d Mg Alloy by Copper- and Phosphate-Based Sealing Treatment

J. Bai, F. Xue, C. Chu, 2023, SSRN Electronic Journal.

Developing Zn–1.5Mg Alloy with Simultaneous Improved Strength, Ductility and Suitable Biodegradability by Rolling at Room Temperature

Ziyue Xu, Hua-nan Liu, J. Bai, 2023, Acta Metallurgica Sinica (English Letters).

A high strength and ductility Zn–Cu–Mg alloy achieved by bandlike distribution of ultra-fine CuZn5 and Mg2Zn11 particles

Hua-nan Liu, Y. Xin, J. Bai, 2022, Materials Science and Engineering: A.

Effect of ECAP temperature on formation of triple heterogeneous microstructure and mechanical properties of Zn–1Cu alloy

Hua-nan Liu, Kaixiao Zhang, J. Bai, 2021 .

The inhibition mechanism of liquid metal embrittlement cracks in the Fe–Cu system by Al: atomistic simulations and calculations

Zan Wang, F. Xue, Jian Zhou, 2023, Journal of Materials Science.

Effect of Al Bronze Interlayer on Liquid–Solid Compound Interface of Sn Bronze/Steel

F. Xue, Jian Zhou, Shuo Wang, 2023, Advanced Engineering Materials.

Suppression of LME cracks in Sn bronze-steel system based on multi-material additive manufacturing

F. Xue, Jian Zhou, J. Ju, 2022, Materials Letters.

Grain refinement mechanism and mechanical properties of wrought Zn-0.1Mg-0.02Mn alloys by rolling at different reductions

Hua-nan Liu, J. Yin, J. Bai, 2023, Journal of Materials Research and Technology.

Achieving high strength, excellent ductility, and suitable biodegradability in a Zn-0.1Mg alloy using room-temperature ECAP

Hua-nan Liu, Chao Sun, Y. Xin, 2022, Journal of Alloys and Compounds.

Refining 18R-LPSO phase into sub-micron range by pre-kinking design and its prominent strengthening effect on Mg97Y2Zn1 alloy

Ziyue Xu, Hua-nan Liu, J. Bai, 2023, Journal of Materials Science & Technology.

Martensitic Transformation and Magnetic-Field-Induced Strain in High-Entropy Magnetic Memory Alloy Ni20Mn20Ga20Gd20Co20 by Hot-Magnetic Drawing

K. Yin, Jia Ju, Mengfei Fang, 2022, Materials.

Tailoring Strength and Ductility of Mg97y2zn1 Alloy Through the Architecture of Heterogeneous Lamellar Structure by Large-Ratio Hot Extrusion

Hua-nan Liu, Chao Sun, J. Bai, 2023, SSRN Electronic Journal.

Enhancement of corrosion resistance and antibacterial properties of PEO coated AZ91D Mg alloy by copper- and phosphate-based sealing treatment

J. Bai, F. Xue, C. Chu, 2023, Corrosion Science.

Comparative study of the microstructure evolution and mechanical properties of Zn-0.1Mg-0.02Ca alloy under cold rolling and ECAP

Yuna Wu, J. Ju, Jinghua Jiang, 2024, Materials Science and Engineering: A.