Chen Jiang

发表

Design of Switch and Filter Module in RF Wideband Power Amplifier

Chen Jiang, 2007 .

Video Object Segmentation using Teacher-Student Adaptation in a Human Robot Interaction (HRI) Setting

Martin Jägersand, Chen Jiang, Mohamed Elhoseiny, 2018, 2019 International Conference on Robotics and Automation (ICRA).

Technology Research about Copper Alloy Forging Die Design

Chen Jiang, 2006 .

MODAL ANALYSIS OF DAMAGED THIN PLATE BASED ON PERTURBATION METHOD

Chen Jiang, 2006 .

A new electrical method on airflow fault detection of air handling unit (AHU)

Thomas G. Habetler, Chen Jiang, Ronald G. Harley, 2015, 2015 Clemson University Power Systems Conference (PSC).

A fast control-integrated and multiphysics-based multi-objective design optimization of switched reluctance machines

Shen Zhang, Thomas G. Habetler, J. Rhett Mayor, 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

Investigation of the Construction of 5-Core Polymer Insulated Power Cables

Chen Jiang, 2006 .

Aerodynamic Redesign of a Centrifugal Compressor Impeller

Chen Jiang, 2006 .

Differential Pressure Based Mini-Volume Pneumatic Flow Measurement

Chen Jiang, 1998 .

Development of a Novel Non-contact High Power AC Compensated Stabilizer

Chen Jiang, 2005 .

An efficient surrogate-assisted particle swarm optimization algorithm for high-dimensional expensive problems

Xinyu Shao, Chen Jiang, Liang Gao, 2019, Knowl. Based Syst..

Numerical simulation of the flow-field and performance of amicro-flowrate centrifugal compressor impeller

Chen Jiang, 2008 .

Algorithm and Experiment of Estimation of Time of Precision Cylindrical Plunge Grinding Based on Acoustic Emission Signal

Chen Jiang, Chenwei Jiang, 2014 .

Design of television monitoring system used in electron beam welder based on PIC16C73

Chen Jiang, 2010 .

An Improved Control Strategy for Full-controlled Single-phase H Bridge Rectifier

Chen Jiang, Sheng-long Qi, Cheng-cheng Xu, 2015, ICIS 2015.

A review of condition monitoring of induction motors based on stray flux

Thomas G. Habetler, Chen Jiang, Sufei Li, 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

A High-Linearity WCDMA/GSM Reconfigurable Transceiver in 0.13-$\mu\hbox{m}$ CMOS

Xin Li, Dong Qiu, Xiaoyang Zeng, 2013, IEEE Transactions on Microwave Theory and Techniques.

Virtual entropy generation (VEG) method in experiment reliability control: Implications for heat exchanger measurement

Chen Jiang, Yanfeng Zhang, Zhifeng Zhang, 2017 .

Two-dimensional Performance Prediction Method of Axial Compressor for Stall Margin Customizing

Chen Jiang, 2006 .

Calibration System for Wheel Set Wear Online Measurement

Chen Jiang, Wu Kaihua, 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

Parallel grinding error for a noncoaxial nonaxisymmetric aspheric lens using a fixture with adjustable gradient

Yinbiao Guo, Haolin Li, Chen Jiang, 2013 .

Static eccentricity fault detection of the BLDC motor inside the air handler unit (AHU)

Thomas G. Habetler, Chen Jiang, 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

An efficient 210GHz compact harmonic oscillator with 1.4dBm peak output power and 10.6% tuning range in 130nm BiCMOS

Ehsan Afshari, Andreia Cathelin, Chen Jiang, 2016, 2016 IEEE Radio Frequency Integrated Circuits Symposium (RFIC).

A multi-path gated ring oscillator based time-to-digital converter in 65 nm CMOS technology

Chen Jiang, Yumei Huang, Zhiliang Hong, 2013 .

Digital controller with integrated valley switching control for light load efficiency and THD improvements in PFC converter

Chen Jiang, Shamim Choudhury, Hrishikesh Nene, 2017, 2017 IEEE Applied Power Electronics Conference and Exposition (APEC).

Swabbing technology characteristics of solid rocket motor liner

Chen Jiang, 2004 .

All-Inkjet-Printed Low-Voltage Organic Thin-Film Transistors

Chen Jiang, 2019 .

Study on method and compensation technology of off-axis wedge aspheric parallel grinding

郭隐彪, Yinbiao Guo, Chen Jiang, 2011 .

A Fully On-Chip Frequency-Stabilization Mechanism for Terahertz Sources Eliminating Frequency Reference and Dividers

Ehsan Afshari, Chen Jiang, Andreia Cathelin, 2019, IEEE Transactions on Microwave Theory and Techniques.

Numerical investigation on the effect of bowed blade to aerodynamic performance of low pressure turbine under stage condition

Chen Jiang, 2011 .

Improved condition monitoring of the faulty blower wheel driven by brushless DC motor in air handler unit (AHU)

Thomas G. Habetler, Chen Jiang, Wen-ping Cao, 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

An enhanced active DC-flux injection based approach for thermal monitoring of induction machines with direct torque control schemes

Shen Zhang, Chen Jiang, Sufei Li, 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

Low Thermal Conductivity Yttria-Stabilized Zirconia Thermal Barrier Coatings Using the Solution Precursor Plasma Spray Process

Chen Jiang, Maurice Gell, Eric H. Jordan, 2014, Journal of Thermal Spray Technology.

High Temperature Thermal Barrier Coating Made by the Solution Precursor Plasma Spray Process

Chen Jiang, Maurice Gell, Eric H. Jordan, 2014 .

Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia Thermal Barrier Coatings Deposited by the Solution Precursor Plasma Spray Process

Chen Jiang, Maurice Gell, Eric H. Jordan, 2015, Journal of Thermal Spray Technology.

The Solution Precursor Plasma Spray (SPPS) Process: A Review with Energy Considerations

Chen Jiang, Maurice Gell, Eric H. Jordan, 2015, Journal of Thermal Spray Technology.