Anand Parey

发表

Modelling of acoustic emission generated in involute spur gear pair

Ram Bihari Sharma, Anand Parey, Naresh Tandon, 2017 .

Use of Cyclostationarity Based Condition Indicators for Gear Fault Diagnosis Under Fluctuating Speed Condition

Anand Parey, Vikas Sharma, Vikas Sharma, 2017 .

Analysis and comparison of noise and vibration of spur gears finished by advanced finishing processes

Anand Parey, Gaurav Kumar, Kumar Neelesh Jain, 2017 .

Automated gear fault detection of micron level wear in bevel gears using variational mode decomposition

Ram Bilas Pachori, Anand Parey, Dada Saheb Ramteke, 2019, Journal of Mechanical Science and Technology.

Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness

Anand Parey, Yogesh Pandya, Yogesh Pandya, 2013 .

Damage detection in wind turbine gearbox using modal strain energy

Mohamed Haddar, Anand Parey, Fakher Chaari, 2020 .

Simulation of spur gear dynamics and estimation of fault growth

Ming J. Zuo, Anand Parey, Siyan Wu, 2008 .

Performance evaluation of decomposition methods to diagnose leakage in a reciprocating compressor under limited speed variation

Anand Parey, Vikas Sharma, Anand Parey, 2018, Mechanical Systems and Signal Processing.

Investigation of mesh stiffness and modal characteristics of geared rotor system with defects

Anand Parey, Ankur Saxena, 2018 .

Application of Artificial Intelligence to Gearbox Fault Diagnosis: A Review

Anand Parey, Amandeep Singh Ahuja, Anand Parey, 2016 .

Case study on the effectiveness of gear fault diagnosis technique for gear tooth defects under fluctuating speed

Anand Parey, Vikas Sharma, 2017 .

Fault detection of a two-stage gearbox with artificially induced gear crack using vibration monitoring

Anand Parey, Yogesh Pandya, 2011, IICAI.

Analysis and comparision of noise and vibration of straight Bevel gears finished by advanced processes

Neelesh Kumar Jain, Anand Parey, Rahul Kashyap, 2017 .

Gearbox fault diagnosis under fluctuating speed conditions using vibration analysis

Anand Parey, Vikas Sharma, 2017 .

Modal analysis of geared rotor system using finite element method

Anand Parey, Manoj Chouksey, Ankur Saxena, 2016 .

Condition Monitoring of Gearbox using Experimental Investigation of Acoustic Emission Technique

Ram Bihari Sharma, Anand Parey, 2017 .

Fault Detection of Spur Gears Using Vibration Monitoring

Anand Parey, Naresh Tandon, 2010 .

Fault diagnosis of reciprocating compressors using artificial neural networks

Anand Parey, Nidish Ramakrishnan, 2016 .

Dynamic analysis of multi-mesh geared rotor system using modal analysis

Anand Parey, Manoj Chouksey, Ankur Saxena, 2016, 2016 Prognostics and System Health Management Conference (PHM-Chengdu).

Condition Monitoring of Rotary Machines

Anand Parey, N. Tandon, N. Tandon, 2006 .

Experimental measurement of spur gear mesh stiffness using digital image correlation technique

Anand Parey, Naresh K. Raghuwanshi, Anand Parey, 2017 .

Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique

Anand Parey, Yogesh Pandya, Yogesh Pandya, 2013 .

Study of Modal Characteristics of a Geared Rotor System

Anand Parey, Manoj Chouksey, Ankur Saxena, 2016 .

Spur gear dynamic models including defects: A review

Anand Parey, N. Tandon, 2003 .

Evaluating the Performance of Signal Processing Techniques to Diagnose Fault in a Reciprocating Compressor Under Varying Speed Conditions

Anand Parey, Vikas Sharma, 2019 .

Impact velocity modelling and signal processing of spur gear vibration for the estimation of defect size

Anand Parey, N. Tandon, 2007 .

Failure analysis of air cooled condenser gearbox

Neelesh Kumar Jain, Anand Parey, S. C. Koria, 2014 .

Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack

Anand Parey, Yogesh Pandya, Yogesh Pandya, 2013 .

Effect of Back-side Contact on Mesh Stiffness of Spur Gear Pair by Finite Element Method ☆

Anand Parey, Naresh K. Raghuwanshi, Anand Parey, 2017 .

Noise reduction of rotating machine

Anand Parey, Vivek Meena, 2015 .

Effect of Transfer Path of Vibration Signal on Gearbox Fault Detection

Anand Parey, Vikas Sharma, 2018 .

Theoretical and Experimental Investigation of Spur Gearbox with Cracked Pinion Tooth Using Dynamic Model for Condition Monitoring

Anand Parey, Yogesh Pandya, Yogesh Pandya, 2020 .

Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects

Anand Parey, Manoj Chouksey, Ankur Saxena, 2016 .

Gear crack detection using modified TSA and proposed fault indicators for fluctuating speed conditions

Anand Parey, Vikas Sharma, Vikas Sharma, 2016 .

Vibration Reduction of Juicer: A Case Study

Anand Parey, 2015 .

Gearbox fault diagnosis under non-stationary conditions with independent angular re-sampling technique applied to vibration and sound emission signals

Anand Parey, Amandeep Singh, Amandeep Singh, 2017, Applied Acoustics.

Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair

Anand Parey, Manoj Chouksey, Ankur Saxena, 2015 .

Experimental measurement of gear mesh stiffness of cracked spur gear by strain gauge technique

Anand Parey, Naresh K. Raghuwanshi, Anand Parey, 2016 .

Spur gear tooth root crack detection using time synchronous averaging under fluctuating speed

Anand Parey, Yogesh Pandya, Nizar Ahamed, 2014 .

Frequency domain averaging based experimental evaluation of gear fault without tachometer for fluctuating speed conditions

Anand Parey, Vikas Sharma, Vikas Sharma, 2017 .

Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defect

Anand Parey, F. Guillet, M. El Badaoui, 2006 .

Extraction of weak fault transients using variational mode decomposition for fault diagnosis of gearbox under varying speed

Anand Parey, Vikas Sharma, Vikas Sharma, 2020 .

Effect of mesh stiffness of healthy and cracked gear tooth on modal and frequency response characteristics of geared rotor system

Anand Parey, Manoj Chouksey, Ankur Saxena, 2017 .

Experimental Study of Sideband Harmonics in Vibration Spectrum of Two-Stage Planetary Gear Box for Condition Monitoring

Anand Parey, Yogesh Pandya, 2020 .

A Review of Gear Fault Diagnosis Using Various Condition Indicators

Anand Parey, Vikas Sharma, Vikas Sharma, 2016 .

Vibration-Based Fault Diagnosis of a Bevel and Spur Gearbox Using Continuous Wavelet Transform and Adaptive Neuro-Fuzzy Inference System

Anand Parey, Dada Saheb Ramteke, Amandeep Singh Ahuja, 2020 .

Mesh stiffness measurement of cracked spur gear by photoelasticity technique

Anand Parey, Naresh K. Raghuwanshi, Anand Parey, 2015 .

Gearbox fault diagnosis under fluctuating load conditions with independent angular re-sampling technique, continuous wavelet transform and multilayer perceptron neural network

Anand Parey, Amandeep Singh, 2017 .

Gearbox fault diagnosis using acoustic signals, continuous wavelet transform and adaptive neuro-fuzzy inference system

Anand Parey, Amandeep Singh, Amandeep Singh, 2019, Applied Acoustics.

Modelling of acoustic emission generated by crack propagation in spur gear

Ram Bihari Sharma, Anand Parey, Ram Bihari Sharma, 2017 .

An Approach to Acquire Vibration Signals for Gear Fault Detection

Anand Parey, Vikas Sharma, 2021 .

Modeling of Chipped Tooth Fault in Straight Bevel Gears

Anand Parey, Dada Saheb Ramteke, Palash Dewangan, 2021 .

Cyclostationary Analysis-Based Gearbox Fault Diagnosis Under Varying Speed

Anand Parey, Ram Bihari Sharma, Vikas Sharma, 2021 .

Detection of Fault in a Bevel Gearbox Under Varying Speed Conditions

Anand Parey, Yogesh Singh, Abhimanyu Pratap Singh, 2021 .

Automated Gearbox Fault Diagnosis Using Entropy-Based Features in Flexible Analytic Wavelet Transform (FAWT) Domain

Ram Bilas Pachori, Anand Parey, Dada Saheb Ramteke, 2021, Journal of Vibration Engineering & Technologies.

Model Based Fault Diagnosis in Bevel Gearbox

Anand Parey, Dada Saheb Ramteke, Palash Dewangan, 2021, Applied Condition Monitoring.

Variable cosine windowing of intrinsic mode functions: Application to gear fault diagnosis

Ram Bilas Pachori, Anand Parey, 2012 .

Measurement of FRFs of coupled geared rotor system and the development of an accurate finite element model

Anand Parey, Manoj Chouksey, Ankur Saxena, 2018 .

Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffness

Anand Parey, Yogesh Pandya, Yogesh Pandya, 2013 .

Modelling of acoustic emission generated due to pitting on spur gear

Anand Parey, Ram Bihari Sharma, Anand Parey, 2018 .

Fault Diagnosis of Gearbox Using Various Condition Monitoring Indicators for Non-Stationary Speed Conditions : A Comparative Analysis

Anand Parey, Vikas Sharma, 2015 .

Experimental measurement of mesh stiffness by laser displacement sensor technique

Anand Parey, Naresh K. Raghuwanshi, Anand Parey, 2018, Measurement.