Jean-Max Redonnet

发表

A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces

Marcel Mongeau, Mahfoud Herraz, Jean-Max Redonnet, 2020, The International Journal of Advanced Manufacturing Technology.

Variability influence of machining context on tool tips wear estimation - application to dry turning of 42CrMo4 steel

Frédéric Monies, Jean-Max Redonnet, Stéphane Segonds, 2013, Int. J. Manuf. Res..

Optimization of free-form surface machining using parallel planes strategy and torus milling cutter

Jean-Max Redonnet, Alejandro Gamboa Vázquez, Alberto Traslosheros Michel, 2018 .

Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2015 .

Modelling and optimising the passage of tangency discontinuities in NC linear paths

Jean-Max Redonnet, Stéphane Segonds, Michel Mousseigne, 2012 .

Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter

Johanna Senatore, Walter Rubio, Jean-Max Redonnet, 2013, Comput. Aided Des..

Improved positioning for side milling of ruled surfaces: Analysis of the rotation axis's influence on machining error

Johanna Senatore, Walter Rubio, Frederic Monies, 2007 .

Improving NC Milling Skills through Practise of Simulated Work

Jean-Max Redonnet, Pierre Lagarrigue, Patrick Gilles, 2005 .

Five-axis NC milling of ruled surfaces: Optimal geometry of a conical tool

Walter Rubio, Frederic Monies, Jean-Max Redonnet, 2002 .

Optimising Tool Positioning for End-Mill Machining of Free-Form Surfaces on 5-Axis Machines for both Semi-Finishing and Finishing

Walter Rubio, Frederic Monies, Jean-Max Redonnet, 2000 .

Analysis of improved positioning in five-axis ruled surface milling using envelope surface

Johanna Senatore, Frédéric Monies, Walter Rubio, 2005, Comput. Aided Des..

Milling plan optimization with an emergent problem solving approach

Walter Rubio, Jean-Max Redonnet, Alexandre Perles, 2015, Comput. Ind. Eng..

An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter

Walter Rubio, Florian Bugarin, Jean-Max Redonnet, 2019, J. Intell. Manuf..

Calculation of the scallop height in space and automatic step over correction

Walter Rubio, Frederic Monies, Jean-Max Redonnet, 1999 .

Optimal Mill Positioning in Five Axis Machining on Free Form Surfaces: Application at Roughing Path of Moulds

Walter Rubio, Jean-Max Redonnet, Gilles Dessein, 1999 .

Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory

Jean-Max Redonnet, Gilles Dessein, Yann Landon, 2013 .

Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2013 .

Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference

Walter Rubio, Jean-Max Redonnet, Gilles Dessein, 1998 .

Compensation for machining defects due to spindle dilatation

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2001 .

Toolpath planning optimization for end milling of free-form surfaces using a clustering algorithm

Marcel Mongeau, Mahfoud Herraz, Jean-Max Redonnet, 2021 .

Side Milling of Ruled Surfaces — Optimum Tool Radius Determination and Milling Cutter Positioning

Walter Rubio, Jean-Max Redonnet, Gilles Dessein, 1999 .