Stefano Petrò

发表

Segmentation-free geometrical verification of additively manufactured components by x-ray computed tomography

Giovanni Moroni, Stefano Petrò, G. Moroni, 2018 .

Network part program approach based on the STEP-NC data structure for the machining of multiple fixture pallets

Stefano Petrò, Tullio Tolio, Stefania Pellegrinelli, 2014, Int. J. Comput. Integr. Manuf..

Inspection Strategies and Multiple Geometric Tolerances

Giovanni Moroni, Stefano Petrò, 2013 .

Early cost estimation for tolerance verification

Stefano Petrò, Tullio Tolio, Giovanni Moroni, 2011 .

Design for X-Ray Computed Tomography

Stefano Petrò, Giovanni Moroni, 2019 .

Modeling of Surfaces Subject to Orientation Tolerances

Giovanni Moroni, Stefano Petrò, 2010 .

3D Tolerance Analysis with Manufacturing Signature and Operating Conditions

Giovanni Moroni, Stefano Petrò, Wilma Polini, 2016 .

Four-axis micro measuring systems performance verification

Giovanni Moroni, Stefano Petrò, Wahyudin P. Syam, 2014 .

Performance Verification of a 4-Axis Focus Variation Co-Ordinate Measuring System

Giovanni Moroni, Stefano Petrò, Wahyudin P. Syam, 2017, IEEE Transactions on Instrumentation and Measurement.

Adaptive inspection in coordinate metrology based on kriging models

Giovanni Moroni, Stefano Petrò, Daniele Romano, 2013 .

Functionality-based Part Orientation for Additive Manufacturing☆

Giovanni Moroni, Stefano Petrò, Wahyudin P. Syam, 2015 .

Managing uncertainty in the new manufacturing era

Giovanni Moroni, Stefano Petrò, G. Moroni, 2018 .

Optimal inspection strategy planning for geometric tolerance verification

Giovanni Moroni, Stefano Petrò, G. Moroni, 2014 .

Quality Control of Manufactured Surfaces

Stefano Petrò, Bianca Maria Colosimo, Federica Mammarella, 2010 .

Geometric Inspection Planning as a Key Element in Industry 4.0

Giovanni Moroni, Stefano Petrò, G. Moroni, 2018 .

Robust design of fixture configuration

Giovanni Moroni, Stefano Petrò, Wilma Polini, 2014 .

Towards Early Estimation of Part Accuracy in Additive Manufacturing

Giovanni Moroni, Stefano Petrò, Wahyudin P. Syam, 2014 .

Volumetric tolerancing and geometric verification for additive manufacturing

Stefano Petrò, Giovanni Moroni, 2019 .

A variational model for 3D tolerance analysis with manufacturing signature and operating conditions

Giovanni Moroni, Stefano Petrò, Wilma Polini, 2018 .

Interoperability in Coordinate Metrology

Stefano Petrò, Giovanni Moroni, Chiara Galbiati, 2019 .

A Discussion on Performance Verification of 3D X-Ray Computed Tomography Systems

Giovanni Moroni, Stefano Petrò, 2018 .

A simulation method to estimate task-specific uncertainty in 3D microscopy

Stefano Petrò, Wahyudin P. Syam, Giovanni Moroni, 2018, Measurement.

Economic Aspects in the Inspection of Multiple Geometric Tolerances

Giovanni Moroni, Stefano Petrò, 2012 .

Impact of the Threshold on the Performance Verification of Computerized Tomography Scanners

Giovanni Moroni, Stefano Petrò, G. Moroni, 2016 .

Coordinate Measuring Machine Measurement Planning

Giovanni Moroni, Stefano Petrò, 2011 .

Adaptive inspection of free-form surfaces in coordinate metrology.

Giovanni Moroni, Stefano Petrò, Daniele Romano, 2011 .

A double shift self-calibration method for micro XY stages

Stefano Petrò, 2019 .

Artifact-based calibration and performance verification of the MScMS-II

Giovanni Moroni, Stefano Petrò, Luca Mastrogiacomo, 2015 .

Process parameters effect on cutting forces and geometrical quality in thin wall micromilling

Quirico Semeraro, Stefano Petrò, Massimiliano Annoni, 2013 .

CMM Measurement Uncertainty Reduction Via Sampling Strategy Optimization

Giovanni Moroni, Stefano Petrò, 2008 .

Volumetric Error Compensation for the MScMS-II

Giovanni Moroni, Stefano Petrò, Luca Mastrogiacomo, 2013 .

On standardization efforts for additive manufacturing

Stefano Petrò, Giovanni Moroni, Huan Shao, 2020 .

3D Identification of Face and Flank in Micro-mills for Automatic Measurement of Rake Angle

Stefano Petrò, Giovanni Moroni, 2020 .

Geometric tolerance evaluation: A discussion on minimum zone fitting algorithms

Giovanni Moroni, Stefano Petrò, 2008 .

Geometrical product specification and verification in additive manufacturing

Giovanni Moroni, Stefano Petrò, Wilma Polini, 2017 .

Robustness of geometric verification by segmentation-free X-ray computed tomography

Stefano Petrò, Giovanni Moroni, 2020 .

Support data for the "A Statistical Point of View on the ISO 10360 Standard for Coordinate Measuring Systems Verification" Article

Stefano Petrò, 2021 .

Statistics-based decision rules for the ISO 10360 series of standard tests

Giovanni Moroni, Stefano Petrò, 2021 .

A statistical point of view on the ISO 10360 series of standards for coordinate measuring systems verification

Giovanni Moroni, Stefano Petrò, 2021 .

Conformance and nonconformance in segmentation-free X-ray computed tomography geometric inspection

Giovanni Moroni, Stefano Petrò, Paul J. Scott, 2021 .

A tolerance interval based criterion for optimizing discrete point sampling strategies

Giovanni Moroni, Stefano Petrò, Bianca Maria Colosimo, 2010 .

Performance improvement for optimization of the non-linear geometric fitting problem in manufacturing metrology

Giovanni Moroni, Stefano Petrò, Wahyudin P. Syam, 2014 .

Manufacturing signature of turned circular profiles

Quirico Semeraro, Giovanni Moroni, Stefano Petrò, 2004 .