Umberto Galietti

发表

Energetic approach based on IRT to assess plastic behaviour in CT specimens

Rosa De Finis, Davide Palumbo, Francesco Ancona, 2017, Commercial + Scientific Sensing and Imaging.

GS(3)-12(GSW0459) Use of Thermography for the Evaluation of the Behaviour of Different Tyre Patches

Carmine Pappalettere, Umberto Galietti, L. Spagnolo, 2003 .

Coating defect evaluation based on stimulated thermography

Davide Palumbo, Umberto Galietti, Rosanna Tamborrino, 2017, Commercial + Scientific Sensing and Imaging.

A new thermographic procedure for the non-destructive evaluation of RSW joints

Umberto Galietti, Davide Palumbo, Ester D'Accardi, 2019, Defense + Commercial Sensing.

Stress Analysis of a car engine bracket using a hybrid technique

Umberto Galietti, R Fracchia, T. Giunti, 1996 .

Enhancing defects characterization in pulsed thermography by noise reduction

Tiziana D'Orazio, Ettore Stella, Umberto Galietti, 2019, NDT & E International.

Analisi Del Danneggiamento Su Componenti in Materiale Composito Con Tecnica Termoelastica

Carmine Pappalettere, Umberto Galietti, Umberto Galietti, 2009 .

Two-dimensional cross-correlation for defect detection in composite materials inspected by lock-in thermography

Ettore Stella, Davide Palumbo, Umberto Galietti, 2017, 2017 22nd International Conference on Digital Signal Processing (DSP).

Assessment of the quality of adhesive bond in t-joints coupons by using thermoelastic stress analysis

Rosa De Finis, Umberto Galietti, Davide Palumbo, 2020, Defense + Commercial Sensing.

Nondestructive control of glass components by means of thermography

Umberto Galietti, L. Spagnolo, Andrea Cavicchia, 2002, SPIE Defense + Commercial Sensing.

Mechanical Behaviour of Stainless Steels under Dynamic Loading: An Investigation with Thermal Methods

Davide Palumbo, Umberto Galietti, Rosa De Finis, 2016, J. Imaging.

Quantitative analysis of thermographic data through different algorithms

Umberto Galietti, D. Palumbo, Rosanna Tamborrino, 2018 .

Thermoelastic stress analysis of thin cylindrica tubes subjected to opposed radial loads

P. Stanley, Carmine Pappalettere, Umberto Galietti, 1996 .

Thermal Methods for Evaluating Flaws in Composite Materials: A New Approach to Data Analysis

Davide Palumbo, Umberto Galietti, 2017 .

Utilizzo di una rete neurale per il TNDE di difetti in materiali compositi

Umberto Galietti, L. Spagnolo, 2003 .

The influence of the truncation window size on the quantitative thermographic results after a pulsed test on an aluminium sample: comparison among different post-processing algorithms

Davide Palumbo, Umberto Galietti, Rosanna Tamborrino, 2019, Defense + Commercial Sensing.

Energy analysis of fatigue damage by thermographic technique

Umberto Galietti, Anna Eva Morabito, Vito Dattoma, 2002, SPIE Defense + Commercial Sensing.

Thermographic signal analysis of friction stir welded AA 5754 H111 joints

Rosa De Finis, Davide Palumbo, Umberto Galietti, 2018, Commercial + Scientific Sensing and Imaging.

A novel design of ventricular assist device: An in vitro feasibility study

Carmine Pappalettere, Umberto Galietti, Antonio Boccaccio, 2012, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.

Hybrid procedure to characterize hidden defects in composite materials

Umberto Galietti, Carmine Pappalettere, L. Spagnolo, 2002, SPIE Defense + Commercial Sensing.

Automatic detection of subsurface defects in composite materials using thermography and unsupervised machine learning

Ettore Stella, Davide Palumbo, Umberto Galietti, 2016, 2016 IEEE 8th International Conference on Intelligent Systems (IS).

A novel electro-mechanical Ventricular Assist Device for refractory cardiac insufficiency

Carmine Pappalettere, Umberto Galietti, Antonio Boccaccio, 2011, 2011 IEEE International Symposium on Medical Measurements and Applications.

An application of the differential thermographic technique for welded joints fatigue evaluation

Caterina Casavola, Umberto Galietti, Carmine Pappalettere, 2006, SPIE Defense + Commercial Sensing.

Analytical Model Approximation for Defect Classification in Fiberglass Composites Inspected by Long-Pulse Thermography

Tiziana D'Orazio, Umberto Galietti, Roberto Marani, 2020, 2020 IEEE International Conference on Industrial Technology (ICIT).

Sistemi di sicurezza meccatronici innovativi (cablati e wireless) per applicazioni ferroviarie, aerospaziali e robotiche (MASSIME)

Maria Pia Fanti, Claudia Barile, Caterina Casavola, 2014 .

A simple projection moiré system to measure displacements of aircraft structures

Luciano Lamberti, Umberto Galietti, Katia Genovese, 2007 .

A Convolution Residual Network for Heating-Invariant Defect Segmentation in Composite Materials Inspected by Lock-in Thermography

Davide Palumbo, Umberto Galietti, Roberto Marani, 2021, IEEE Transactions on Instrumentation and Measurement.

Strain Measurement in Composite Materials Using Embedded Strain Gauges

Carmine Pappalettere, Umberto Galietti, C. Pappalettere, 1997 .

Effect of Friction Stir Process Parameters on the Mechanical and Thermal Behavior of 5754-H111 Aluminum Plates

Antonio Domenico Ludovico, Davide Palumbo, Umberto Galietti, 2016, Materials.

Non-destructive defect characterization of concrete structures reinforced by means of FRP

Umberto Galietti, L. Spagnolo, Vincenza A.M. Luprano, 2007 .

Infrared thermography for the investigation of dynamic thermal behaviour of opaque building elements: Comparison between empty and filled with hemp fibres prototype walls

Davide Palumbo, Umberto Galietti, Patrizia Aversa, 2017 .

A new rapid thermographic method to assess the fatigue limit in GFRP composites

Davide Palumbo, Umberto Galietti, Rosa De Finis, 2016 .

Characterization of Material Damage by Ultrasonic Immersion Test

Umberto Galietti, Aguinaldo Fraddosio, Mario Daniele Piccioni, 2015 .

Study of damage evolution in composite materials based on the Thermoelastic Phase Analysis (TPA) method

Davide Palumbo, Umberto Galietti, Giuseppe Pompeo Demelio, 2017 .

A novel signal processing method for TSA applications

Umberto Galietti, L. Spagnolo, U. Galietti, 2005 .

Non destructive evaluation of composite materials with thermal methods

Davide Palumbo, Umberto Galietti, G. Calia, 2012 .

Fatigue limit evaluation of various martensitic stainless steels with new robust thermographic data analysis

Davide Palumbo, Umberto Galietti, D. Palumbo, 2015 .

Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methods

Davide Palumbo, Umberto Galietti, Patrizia Aversa, 2016 .

A Quantitative Analysis of the Thermoelastic Effect in CFRP Composite Materials

Umberto Galietti, Giuseppe Pitarresi, G. Pitarresi, 2010 .

On the Feasibility of Thermoelastic Stress Analysis on Rapid Prototyping Models

Umberto Galietti, D. Modugno, Giuseppe Carella, 2005 .

A Quantitative Comparison Among Different Algorithms for Defects Detection on Aluminum with the Pulsed Thermography Technique

Davide Palumbo, Umberto Galietti, Rosanna Tamborrino, 2018, Metals.

Modeling and classification of defects in CFRP laminates by thermal non-destructive testing

Tiziana D'Orazio, Ettore Stella, Davide Palumbo, 2018 .

Quantitative damage evaluation of composite materials with microwave thermographic technique: feasibility and new data analysis

Davide Palumbo, Umberto Galietti, D. Palumbo, 2015 .

An investigation of the stepped thermography technique for defects evaluation in GFRP materials

Davide Palumbo, Umberto Galietti, D. Palumbo, 2019, NDT & E International.

Is the temperature plateau of a self-heating test a robust parameter to investigate the fatigue limit of steels with thermography?

Davide Palumbo, Umberto Galietti, D. Palumbo, 2018 .

Optimization and Characterization of the Friction Stir Welded Sheets of AA 5754-H111: Monitoring of the Quality of Joints with Thermographic Techniques

Rosa De Finis, Davide Palumbo, Umberto Galietti, 2017, Materials.

Characterisation of steel welded joints by infrared thermographic methods

Davide Palumbo, Umberto Galietti, D. Palumbo, 2014 .

Investigation on the Influence of the Surface Resin Rich Layer on the Thermoelastic Signal from Different Composite Laminate Lay-Ups

Umberto Galietti, Giuseppe Pitarresi, G. Pitarresi, 2005 .

New data analysis to evaluate defects in composite materials using microwaves thermography

Umberto Galietti, D. Palumbo, F. Ancona, 2012 .

Thermoelastic Stress Analysis: numerical automatic shape reconstruction for stress separation

Carmine Pappalettere, Umberto Galietti, N. Metta, 2000 .

Damage Investigation in Composite Materials by Means of New Thermal Data Processing Procedures

Davide Palumbo, Umberto Galietti, D. Palumbo, 2016 .