Alexander W. Abboud

发表

DLR use for optimization of network design withvery large wind (and VRE) penetration

Ana Estanqueiro, Claes Ahlrot, Joaquim Duque, 2018 .

Improvement of Transmission Line Ampacity Utilization by Weather-Based Dynamic Line Rating

Jake P. Gentle, Alexander W. Abboud, Bishnu P. Bhattarai, 2018, IEEE Transactions on Power Delivery.

A methodology to reduce the computational cost of transient multiphysics simulations for waste vitrification

Alexander W. Abboud, Donna Post Guillen, D. Guillen, 2018, Comput. Chem. Eng..

Communication—Implications of Local Current Density Variations on Lithium Plating Affected by Cathode Particle Size

Alexander W. Abboud, Bor Yann Liaw, Eric J. Dufek, 2019, Journal of The Electrochemical Society.

Coupling computational fluid dynamics with the high resolution rapid refresh model for forecasting dynamic line ratings

Jake P. Gentle, Alexander W. Abboud, Timothy R. McJunkin, 2019, Electric Power Systems Research.

Development of a Validation Approach for an Integrated Waste Glass Melter Model

Alexander W. Abboud, D. Guillen, R. Pokorný, 2018, Nuclear Technology.

Prediction of melter cold‐cap topology from plenum temperatures with computational fluid dynamics and machine learning

Alexander W. Abboud, D. Guillen, Bailey A. Christensen, 2022, International Journal of Ceramic Engineering & Science.

A numerical comparison of precipitating turbulent flows between large‐eddy simulation and one‐dimensional turbulence

Alexander W. Abboud, Sean T. Smith, Benjamin Schroeder, 2015 .

Sensitivity study of a full-scale industrial spray-injected fluidized bed reactor

Alexander W. Abboud, D. Guillen, 2018, Powder Technology.

Particle settling in a simulated melter discharge riser

Alexander W. Abboud, D. Guillen, K. Fox, 2019, Materials Letters.

Sensitivity study of coupled chemical-CFD simulations for analyzing aluminum-clad spent nuclear fuel storage in sealed canisters

Alexander W. Abboud, 2022, Nuclear Engineering and Design.

Response surface data for sensitivity study of industrial spray injected fluidized bed reactor

Alexander W. Abboud, D. Guillen, 2018, Data in brief.

Topology optimization of an airfoil fin microchannel heat exchanger using artificial intelligence

Alexander W. Abboud, D. Guillen, James Bennink, 2022, Nuclear Engineering and Design.

Conversion kinetics during melting of simulated nuclear waste glass feeds measured by dissolution of silica

Alexander W. Abboud, P. Ferkl, D. Guillen, 2022, Journal of Non-Crystalline Solids.

Heat transfer from glass melt to cold cap: Computational fluid dynamics study of cavities beneath cold cap

Alexander W. Abboud, D. Guillen, R. Pokorný, 2020 .

Effect of cold cap coverage and emissivity on the plenum temperature in a pilot‐scale waste vitrification melter

Alexander W. Abboud, A. Abboud, D. Guillen, 2020 .

Numerical comparison of bubbling in a waste glass melter

Alexander W. Abboud, J. Cambareri, I. Bolotnov, 2018 .

Coupled Chemical-Cfd Modeling of Unsealed Dry Storage of Advanced Test Reactor Spent Fuel

Alexander W. Abboud, 2022, SSRN Electronic Journal.

Glass-contact refractory of the nuclear waste vitrification melters in the United States: a review of corrosion data and melter life

Alexander W. Abboud, D. Guillen, A. Kruger, 2023, International Materials Reviews.

Fast Diagnosis of Failure Mechanisms and Lifetime Prediction of Li Metal Batteries.

Alexander W. Abboud, Eric J. Dufek, Adam A. Corrao, 2020, Small methods.

Large eddy simulation of a coaxial jet with a synthetic turbulent inlet

Alexander W. Abboud, Sean T. Smith, A. Abboud, 2014 .