Manfred Staat

发表

DESIGN BY ANALYSIS OF PRESSURE COMPONENTS BY NON-LINEAR OPTIMIZATION

Manfred Staat, Marcus Schwartz, Hermann Lang, 2003 .

Virtual Needle Simulation with Haptics for Regional Anaesthesia / Ullrich, Sebastian ; Grottke, Oliv

Manfred Staat, Sebastian Ullrich, Oliver Grottke, 2010 .

Flight style optimization in ski jumping on normal, large, and ski flying hills.

Manfred Staat, Alexander Jung, Wolfram Müller, 2014, Journal of biomechanics.

Probabilistic assessment of the fracture mechanics behaviour of an HTR-module primary circuit pressure boundary

Manfred Staat, 1996 .

Preliminary Bone Sawing Model for a Virtual Reality-Based Training Simulator of Bilateral Sagittal Split Osteotomy

Manfred Staat, Thomas Knott, Torsten Kuhlen, 2014, ISBMS.

Reliability Analysis of Elasto-Plastic Structures under Variable Loads

Manfred Staat, M. Heitzer, Manfred Staat, 2000 .

Determination of the frictional coefficient of the implant-antler interface: experimental approach

Manfred Staat, Christoph Bourauel, Gerhard Wahl, 2012, Biomedizinische Technik. Biomedical engineering.

RELIABILITY ASSESSMENT OF PASSIVE SAFETY SYSTEMS

L. Burgazzi, Manfred Staat, G. L. Fiorini, 1998 .

Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels

Manfred Staat, 2005 .

Calculation of muscle forces and joint reaction loads in the shoulder area via an OpenSim based computer model

Manfred Staat, Kilian Wegmann, Stefan Birgel, 2018 .

Direct finite element route for design-by-analysis of pressure components

Manfred Staat, M. Heitzer, Hermann Lang, 2005 .

Sample-specific adaption of an improved electro-mechanical model of in vitro cardiac tissue.

Manfred Staat, Ralf Frotscher, Danita Muanghong, 2016, Journal of biomechanics.

LISA : a European project for FEM-based limit and shakedown analysis

Manfred Staat, M. Heitzer, Manfred Staat, 2001 .

Plastic collapse analysis of longitudinally flawed pipes and vessels

Manfred Staat, Manfred Staat, 2004 .

Analysis of pressure equipment by application of the primal-dual theory of shakedown

Manfred Staat, Duc Khoi Vu, Ich Thinh Tran, 2006 .

An open-source tool for the validation of finite element models using three-dimensional full-field measurements.

Manfred Staat, Alexander Jung, Stephen Mellon, 2020, Medical engineering & physics.

Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions

Manfred Staat, Aroj Bhattarai, Manfred Staat, 2018, Comput. Math. Methods Medicine.

A Two Phase Mixture Model based on Bone Observation

Manfred Staat, R.-R. Kühn, W. Hauger, 2004 .

Advances in Composite Material

Norbert Palka, Manfred Staat, Ismet Baran, 2017 .

Numerical methods for limit and shakedown analysis : deterministic and probabilistic problems

Manfred Staat, M. Heitzer, Manfred Staat, 2003 .

Cyclic plastic deformation tests to verify FEM-based shakedown analyses

Manfred Staat, M. Heitzer, R. Oettel, 2001 .

Direct plastic structural design under lognormally distributed strength by chance constrained programming

Manfred Staat, Ngọc Trình Trần, Manfred Staat, 2020, Optimization and Engineering.

Towards Patient-Specific Computational Modeling of hiPS-Derived Cardiomyocyte Function and Drug Action

Manfred Staat, Ralf Frotscher, Manfred Staat, 2018 .

Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material

Manfred Staat, Michael Heitzer, Gabriela Pop, 2000, J. Glob. Optim..

Failure probabilities of the primary circuit pressure boundary of an HTR-Module for process heat generation under accident conditions for different failure modes

Manfred Staat, 1993 .

Finite element modelling of stapled colorectal end-to-end anastomosis: Advantages of variable height

Manfred Staat, Frédéric Turquier, Uwe Klinge, 2012 .

Surgical treatment of vaginal vault prolapse using different prosthetic mesh implants: a finite element analysis

Manfred Staat, Ralf Anding, Aroj Bhattarai, 2018 .

SHAKEDOWN ANALYSIS OF PLATE BENDING UNDER STOCHASTIC UNCERTAINTY BY CHANCE CONSTRAINED PROGRAMMING

Manfred Staat, H. G. Matthies, Thanh Ngoc Tran, 2016, Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016).

Reliability of an HTR-module primary circuit pressure boundary : influences, sensitivity, and comparison with a PWR

Manfred Staat, 1995 .

Limit loads of circumferentially flawed pipes and cylindrical vessels under internal pressure

Manfred Staat, Duc Khoi Vu, 2006 .

FEM-computation of load carrying capacity of highly loaded passive components by direct methods

Manfred Staat, M. Heitzer, 1999 .

Mechanics of Soft Tissue Reactions to Textile Mesh Implants

Manfred Staat, Aroj Bhattarai, Manfred Staat, 2018 .

Introducing a Method of In Vitro Testing of Different Anchoring Systems Used for Female Incontinence and Prolapse Surgery

Manfred Staat, Uwe Klinge, Ralf Anding, 2013, BioMed research international.

Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis

Manfred Staat, 2002 .

A FACE-BASED SMOOTHED FINITE ELEMENT METHOD FOR HYPERELASTIC MODELS AND TISSUE GROWTH

Manfred Staat, Minh Tuan Duong, 2013 .

Physical response of hyperelastic models for composite materials and soft tissues

Manfred Staat, Minh Tuan Duong, Nhu Huynh Nguyen, 2015 .

FEM-based shakedown analysis of hardening structures

Manfred Staat, Manfred Staat, Phu Tinh Phạm, 2014 .

Limit analysis of flaws in pressurized pipes and cylindrical vessels. Part I: Axial defects

Manfred Staat, Duc Khoi Vu, D. Vu, 2007 .

LIMIT AND SHAKEDOWN ANALYSIS UNDER UNCERTAINTY

Manfred Staat, 2014 .

Upper bound limit and shakedown analysis of shells using the exact Ilyushin yield surface

Manfred Staat, Duc Khoi Vu, D. Vu, 2008 .

Stresses produced by different textile mesh implants in a tissue equivalent

Manfred Staat, Ralf Frotscher, 2014 .

Probabilistic limit and shakedown analysis of thin plates and shells

Manfred Staat, T. N. Tran, R. Kreißig, 2009 .