George M. Pharr

发表

2000 MRS Fall Meeting Symposium Q: Fundamentals of Nanoindentation and Nanotribology II

G Steven, Martin A. Wiedenmeier, George M. Pharr, 2000 .

MATERIALS CHARACTERIZATION VIA THE SHARED RESEARCH EQUIPMENT USER

Edward A. Kenik, Neal D. Evans, George M. Pharr, 2001 .

Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement

George M. Pharr, Warren C. Oliver, G. Pharr, 2009 .

Measurement of power-law creep parameters by instrumented indentation methods

George M. Pharr, Sangjoon Sohn, Warren C. Oliver, 2013 .

The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 °C)

John P. Shingledecker, George M. Pharr, G. Pharr, 2012, Metallurgical and Materials Transactions A.

Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis

Haitao Xu, Siqun Wang, George M. Pharr, 2007 .

Cracking During Nanoindentation and its Use in the Measurement of Fracture Toughness

George M. Pharr, Warren C. Oliver, G. Pharr, 1994 .

Fundamentals and applications of instrumented indentation in multidisciplinary research

Michael V. Swain, George M. Pharr, G. Pharr, 2004 .

Nanoindentation of wood cell walls: Continuous stiffness and hardness measurements

Timothy G. Rials, Stephen S. Kelley, Siqun Wang, 2007 .

Depth-resolved residual stress analysis of thin coatings by a new FIB–DIC method

Marco Sebastiani, George M. Pharr, Edoardo Bemporad, 2011 .

A critical examination of the fundamental relations used in the analysis of nanoindentation data

Alexei Bolshakov, George M. Pharr, G. Pharr, 1999 .

Influences of composition and grain size on creep–rupture behavior of Inconel® alloy 740

John P. Shingledecker, Neal D. Evans, George M. Pharr, 2013 .

Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior

Michael J. Lance, George M. Pharr, Ting Y. Tsui, 2005 .

On the measurement of stress–strain curves by spherical indentation

George M. Pharr, Warren C. Oliver, G. Pharr, 2001 .

Factors limiting the measurement of residual stresses in thin films by nanoindentation

Amit Misra, George M. Pharr, Thomas R. Watkins, 2004 .

Nanoscale incipient asperity sliding and interface micro-slip assessed by the measurement of tangential contact stiffness

Yanfei Gao, George M. Pharr, Warren C. Oliver, 2006 .

Nanoindentation and the dynamic characterization of viscoelastic solids

George M. Pharr, Warren C. Oliver, G. Pharr, 2008 .

White microbeam diffraction from distorted crystals

Wenge Yang, Gene E. Ice, George M. Pharr, 2001 .

Measurement of Fracture Toughness in Thin Films and Small Volumes Using Nanoindentation Methods

George M. Pharr, Warren C. Oliver, G. Pharr, 1993 .

A model of size effects in nano-indentation

Keh Chih Hwang, George M. Pharr, William D. Nix, 2006 .

Assessment of New Relation for the Elastic Compliance of a Film-Substrate System

George M. Pharr, G. Pharr, A. Rar, 2001 .

Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations

Alexei Bolshakov, George M. Pharr, Warren C. Oliver, 1996 .

Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy

George M. Pharr, Ting Y. Tsui, Warren C. Oliver, 1996 .

Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques

Alexei Bolshakov, George M. Pharr, G. Pharr, 1998 .

On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation

George M. Pharr, Warren C. Oliver, G. Pharr, 1992 .

Measurement of residual stress by load and depth sensing indentation with spherical indenters

John G Swadener, George M. Pharr, B. Taljat, 2001 .

Evidence for nanoindentation-induced phase transformations in germanium

Michael J. Lance, George M. Pharr, Jae-il Jang, 2005 .

Instrumented Indentation Testing

George M. Pharr, G. Pharr, J. L. Hay, 2000 .

On the measurement of yield strength by spherical indentation

George M. Pharr, Warren C. Oliver, E. Herbert, 2006 .

Indentation Methods in Advanced Materials Research Introduction

Ian M. Hutchings, Michael V. Swain, Yang-Tse Cheng, 2009 .

Electrical resistance of metallic contacts on silicon and germanium during indentation

David R. Clarke, George M. Pharr, Robert F. Cook, 1992 .

A combinatorial thin film sputtering approach for synthesizing and characterizing ternary ZrCuAl metallic glasses

Jason D. Fowlkes, Y. F. Guan, Philip D. Rack, 2007 .

Nanoindentation in materials research: Past, present, and future

George M. Pharr, Warren C. Oliver, G. Pharr, 2010 .

Measurement of Thin Film Mechanical Properties Using Nanoindentation

George M. Pharr, Warren C. Oliver, G. Pharr, 1992 .

Nanoindentation of soft films on hard substrates: Experiments and finite element simulations

Alexei Bolshakov, George M. Pharr, Ting Y. Tsui, 1997 .

Using the Ratio of Loading Slope and Elastic Stiffness to Predict Pile-Up and Constraint Factor During Indentation

Alexei Bolshakov, George M. Pharr, G. Pharr, 1998 .

Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates

George M. Pharr, Ting Y. Tsui, G. Pharr, 1999 .

Understanding nanoindentation unloading curves

Alexei Bolshakov, George M. Pharr, G. Pharr, 2002 .

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

George M. Pharr, Easo P George, Hongbin Bei, 2014 .

Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation

A. Lumsdaine, George M. Pharr, Warren C. Oliver, 2009 .

Finite element simulation of spherical indentation in the elastic-plastic transition

George M. Pharr, Mathias Göken, Karsten Durst, 2002 .

New evidence for a pressure-induced phase transformation during the indentation of silicon

George M. Pharr, Warren C. Oliver, G. Pharr, 1991 .